NASM02模拟输入模块

NASM02模拟输入模块  

1.产 品 资 料 介 绍：

NASM02模拟输入模块产品特点（15条）

1. ABB贝利原厂模拟输入模块，等效于IMASM02型号，适配Infi 90系统专属场景。

2. 主打热电偶（TC）及毫伏（Mv）信号采集，精准适配温度类传感场景需求。

3. 专属8路信号输入通道，专为低电平毫伏信号设计，采集灵敏度优于通用模块。

4. 兼容K、J、T等主流热电偶型号，可直接对接高温、低温检测传感器。

5. 内置信号放大模块，有效提升毫伏级微弱信号辨识度，降低失真率。

6. 需搭配INBIM02、NTCL01等辅助模块使用，实现系统完整联动控制。

7. 采用差分输入设计，共模抑制比优异，精准屏蔽工业现场电平干扰。

8. 通道间独立电气隔离，避免单通道故障影响整体模块运行稳定性。

9. 适配工业标准24V DC供电，具备反接保护，防止接线误操作损坏模块。

10. 工作温度覆盖-40℃至70℃，可耐受高湿无凝露环境，适配极端工况。

11. 模块化插拔式结构，兼容标准DIN导轨安装，运维更换便捷高效。

12. 内置热电偶冷端补偿功能，无需额外配件即可保障温度测量精度。

13. 支持故障自诊断，可实时反馈通道信号异常、模块通信中断等问题。

14. 与ABB贝利NTMP01终端单元无缝适配，优化信号传输链路稳定性。

15. PCB板采用防氧化工艺处理，延长在工业腐蚀环境中的使用寿命。

16. 广泛应用于冶金、化工高温炉体监测，精准捕捉温度动态变化数据。

NASM02模拟输入模块  英文资料：

NASM02 Analog Input Module Product Features (15)

1. ABB Bailey original analog input module, equivalent to IMASM02 model, suitable for Infi 90 system exclusive scenarios.

2. Focus on thermocouple (TC) and millivolt (Mv) signal acquisition, accurately adapting to temperature sensing scenarios.

3. Exclusive 8-channel signal input channel, designed specifically for low-level millivolt signals, with better acquisition sensitivity than general modules.

4. Compatible with mainstream thermocouple models such as K, J, T, etc., and can directly interface with high and low temperature detection sensors.

5. Built in signal amplification module, effectively improving the identification of weak signals at the millivolt level and reducing distortion rate.

6. It needs to be used in conjunction with auxiliary modules such as INBIM02 and NTCL01 to achieve complete system linkage control.

7. Adopting differential input design, the common mode rejection ratio is superior to others, accurately shielding industrial field level interference.

8. Independent electrical isolation between channels to avoid single channel faults affecting the overall stability of module operation.

9. Compatible with industrial standard 24V DC power supply, with reverse connection protection to prevent module damage caused by wiring errors.

10. The working temperature covers -40 ℃ to 70 ℃, and can withstand high humidity without condensation environment, suitable for extreme working conditions.

11. Modular plug-in structure, compatible with standard DIN rail installation, easy and efficient maintenance and replacement.

12. Built in thermocouple cold junction compensation function ensures temperature measurement accuracy without the need for additional accessories.

13. Support fault self diagnosis and provide real-time feedback on channel signal abnormalities, module communication interruptions, and other issues.

14. Seamless adaptation with ABB Bailey NTMP01 terminal unit to optimize signal transmission link stability.

15. The PCB board is treated with anti-oxidation technology to extend its service life in industrial corrosive environments.

16. Widely used for monitoring high-temperature furnace bodies in metallurgy and chemical industry, accurately capturing temperature dynamic change data.

NASM02模拟输入模块   产品展示

产品视频

3.其他产品

NI PXI-4351 185450D-01温度数据采集模块
Technology MTL5053隔离驱动器
Bently 1900-65A-01-00-01-00-00监测器

4.其他英文产品

LAM 810-099175-012 Semiconductor Controller Module
100472-012 Network Platform Keyboard
HONEYWELL 900ES1-0100 Communication Controller Module

The content is from Ruichang Mingsheng Automation Equipment Co., LTD

Contact: +86 15270269218