AMAT Applied Materials 0015-02149直流电源模块
1.产 品 资 料 介 绍：
- 输入适配宽压交流（推测 90-264V AC），输出为稳定直流（参考同系列模块或达 15V DC 等规格），额定功率覆盖 15-50W，采用 PWM 稳压技术，输出电压精度 ±0.5%，纹波≤50mV，为传感器、驱动电路等半导体设备敏感组件提供洁净电源。
- 转换效率≥90%，空载损耗低，配合智能功耗调节设计，适配设备长期运行需求，减少能源消耗与散热负担。
- 采用端子式或板载式接口，可直接对接 0100-01321 输入输出模块、0190-24007 单板计算机等 AMAT 设备组件，无需额外转接件，简化系统布线。
- 支持 RS485 通信接口与 Modbus 协议，可实时上传输出电压、电流等运行数据至主控系统，适配 ENDURA® 等半导体装备的电源状态监控链路。
- 集成过压（超额定值 115% 触发）、过流（超额定值 150% 切断）、短路、过温（≥85℃断电）四重保护，故障时快速告警并锁定输出，避免损坏下游设备。
- 输入输出隔离电压≥2500V DC，采用 PCB 分层屏蔽结构，抗电磁干扰符合 EN 55022 Class B 标准，适配车间复杂电磁环境。
- 核心元件选用工业级型号，经 - 40~+70℃高低温老化测试，支持 7×24 小时连续运行，平均无故障时间（MTBF）≥8 万小时。
- 符合 UL/CE/RoHS 认证，适配半导体工厂高稼动率生产需求，原厂提供 1-3 年质保，备件可快速替换以缩短停机时间。
AMAT Applied Materials 0015-02149直流电源模块 英文资料：
1. Power supply performance (AMAT 0015-02149)
The input is compatible with wide voltage AC (estimated to be 90-264V AC), and the output is stable DC (referring to modules in the same series or up to 15V DC specifications). The rated power covers 15-50W, and PWM voltage stabilization technology is used. The output voltage accuracy is ± 0.5%, and the ripple is ≤ 50mV, providing clean power for sensitive components of semiconductor devices such as sensors and drive circuits.
Conversion efficiency ≥ 90%, low no-load loss, coupled with intelligent power consumption regulation design, suitable for long-term operation needs of equipment, reducing energy consumption and heat dissipation burden.
2. Adaptation and linkage (AMAT 0015-02149)
By using terminal or onboard interfaces, AMAT equipment components such as 0100-01321 input/output modules and 0190-24007 single board computers can be directly connected without the need for additional adapters, simplifying system wiring.
Supports RS485 communication interface and Modbus protocol, can upload real-time output voltage, current and other operational data to the main control system, compatible with ENDURA ® Waiting for the power status monitoring link of semiconductor equipment.
3. Safety and Protection (AMAT 0015-02149)
Integrated overvoltage (triggered by exceeding the set value by 115%), overcurrent (cut off by exceeding the set value by 150%), short circuit, and over temperature (power-off at ≥ 85 ℃) quadruple protection, quickly alarms and locks the output in case of faults, avoiding damage to downstream equipment.
Input/output isolation voltage ≥ 2500V DC, using PCB layered shielding structure, anti electromagnetic interference meets EN 55022 Class B standard, suitable for complex electromagnetic environment in the workshop.
4. Reliability (AMAT 0015-02149)
The core components are selected from industrial grade models, which have undergone high and low temperature aging tests at -40~+70 ℃. They support continuous operation for 7 × 24 hours, with an average time between failures (MTBF) of ≥ 80000 hours.
Compliant with UL/CE/RoHS certification, suitable for high utilization production needs of semiconductor factories, original factory provides 1-3 year warranty, and spare parts can be quickly replaced to shorten downtime.
AMAT Applied Materials 0015-02149直流电源模块 产品展示
产品视频
3.其他产品
MKS AX8410-28HC发电机模块
MKS AX7695远程等离子源
WOODWARD 9907-573加载共享模块
4.其他英文产品
MOOG M128-010 M128-010-A001B servo controller
PFEA112-65 3BSE050091R65 controller
NI PXIE-8840QC current module
| AMAT 0190-02910 | AMAT 0190-30079 | AMAT 0190-22850 |
| AMAT 0190-02928 | AMAT 0190-30233 | AMAT 0190-22851 |
| AMAT 0190-02957 | AMAT 0190-30331 | AMAT 0190-22907 |
| AMAT 0190-02977 | AMAT 0190-30332 | AMAT 0190-22967 |
| AMAT 0190-02987 | AMAT 0190-30354 | AMAT 0190-22967 |
| AMAT 0190-03069 | AMAT 0190-30421 | AMAT 0190-23114 |
The content is from Ruichang Mingsheng Automation Equipment Co., LTD
Contact: +86 15270269218
