193X268ABG01电源模块

GE   193X268ABG01电源模块

1.产 品 资 料 介 绍：

中文资料：

GE 193X268ABG01 电源模块（Power Supply Module） 是 GE 193X 系列控制系统中的一款关键组件，主要用于为整个控制系统提供稳定的电源。它通常作为系统中的电源调节和分配模块，确保控制系统各个模块获得所需的工作电压，并能够应对各种电气负载的变化。

一、产品概述：

• 产品型号：193X268ABG01

• 类型：电源模块（Power Supply Module）

• 系列归属：GE 193X 控制平台

• 主要功能：电源转换、分配与稳定

二、主要功能：

1. 电源转换与稳压
   将外部电源输入（如交流或直流电源）转换为系统所需的稳定电压，确保其他模块工作时不会受到电压波动的影响。

2. 电压保护
   在电源过压、欠压时，电源模块能够自动进行切断或保护，避免电压异常对系统内部设备造成损坏。

3. 电源分配
   将电源分配到不同的模块，如控制板、继电器、信号处理单元等，确保各部分能够正常工作。

4. 过载与短路保护
   防止系统因电流过载或短路现象造成损坏，保护模块免于因过流而导致的故障。

5. 温度监控与过热保护
   内置温度传感器监控工作温度，确保模块在安全的温度范围内运行，并在过热时采取相应保护措施。

英文资料：

The GE 193X268ABG01 Power Supply Module is a critical component in the GE 193X series control system, primarily used to provide stable power to the entire control system. It is usually used as a power regulation and distribution module in the system, ensuring that each module of the control system obtains the required working voltage and can cope with various electrical load changes.

1、 Product Overview:

Product model: 193X268ABG01

Type: Power Supply Module

Series affiliation: GE 193X Control Platform

Main functions: power conversion, distribution, and stability

2、 Main functions:

Power conversion and voltage stabilization

Convert external power input (such as AC or DC power) into a stable voltage required by the system, ensuring that other modules are not affected by voltage fluctuations during operation.

Voltage protection

When the power supply is overvoltage or undervoltage, the power module can automatically cut off or protect to avoid damage to internal equipment caused by abnormal voltage.

power distribution

Distribute power to different modules, such as control boards, relays, signal processing units, etc., to ensure that each part can work properly.

Overload and short circuit protection

Prevent system damage caused by current overload or short circuit, and protect modules from faults caused by overcurrent.

Temperature monitoring and overheat protection

The built-in temperature sensor monitors the operating temperature to ensure that the module operates within a safe temperature range and takes corresponding protective measures in case of overheating.

2.产      品      展      示      

3.其他产品

IS215UCCCM04AB 控制器板

IS215UCCCM04A 数字量输入模块

EMERSON FLOBOSS S600流量计算机

4.其他英文产品

ABB UN1024c-P Remote Terminal Module

ASEA SNAT7600 driver control circuit board

ABB UN0942b-P Programmable Controller