GE 193X526AAG02直流驱动电源板
1.产 品 资 料 介 绍：
中文资料：
产品名称：直流驱动电源板（DC Drive Power Supply Board）
产品型号：193X526AAG02
制造商：General Electric (GE)
系列归属：193X 工业控制系统系列
产品描述
GE 193X526AAG02 是 193X 控制系统中一款用于 直流驱动供电 的板卡，主要为伺服控制器、速度调节模块、逻辑控制模块等提供稳定的直流电源。它通常部署于 DC 驱动系统 内部，负责电源转换、稳压和分配，确保控制系统的稳定运行。
关键功能
提供多路稳定的 DC 输出电压（如 ±15V、+5V）
用于支持 DC 驱动板、速度控制板、逻辑处理板等
内置电压稳压器、整流器与滤波器
集成过流、短路保护电路，提升系统稳定性
插卡式设计，方便安装、更换与系统维护
技术规格参数
| 参数名称 | 典型数值 |
|---|---|
| 输入电压 | 通常为 115V / 230V AC（由系统母线供电） |
| 输出电压 | +5V、±15V DC（常见规格） |
| 输出电流容量 | 依路数而定，典型为 2～5A |
| 负载调整率 | ≤ ±1%（满载与轻载切换时） |
| 纹波噪声 | ≤50mVp-p（5V输出） |
| 冷却方式 | 自然风冷 / 外部风扇辅助 |
| 结构形式 | 插拔式多层 PCB，带金手指接口 |
| 保护功能 | 过压、过流、过温、短路保护 |
应用场景
应用于 GE 的 DC 马达驱动系统
为伺服控制器、调速器、调节器供电
适用于大型工业自动化控制平台
可用于 GE Mark I/II/IV 系统的电源升级或更换
兼容与替代建议
推荐替代型号：193X526AAG01（注意电压电流规格是否匹配）
替代时需严格核对：输出电压、电流能力、插槽兼容性、电气保护特性
若系统升级至现代 PLC 或 DCS 架构，需使用专用 DC 电源模块并配转换接口
英文资料：
Product Name: DC Drive Power Supply Board
Product model: 193X526AAG02
manufacturer: General Electric (GE)
Series affiliation: 193X Industrial Control System Series
product description
GE 193X526AAG02 is a board used for DC drive power supply in the 193X control system, mainly providing stable DC power for servo controllers, speed regulation modules, logic control modules, etc. It is usually deployed within DC drive systems, responsible for power conversion, voltage regulation, and distribution to ensure the stable operation of the control system.
Key Function
Provide multiple stable DC output voltages (such as ± 15V,+5V)
Used to support DC driver boards, speed control boards, logic processing boards, etc
Built in voltage regulator, rectifier, and filter
Integrate overcurrent and short-circuit protection circuits to enhance system stability
Plug in card design, convenient for installation, replacement, and system maintenance
Technical specifications and parameters
Parameter Name Typical Value
The input voltage is usually 115V/230V AC (powered by the system bus)
Output voltage+5V, ± 15V DC (common specifications)
The output current capacity depends on the number of circuits, typically ranging from 2 to 5A
Load adjustment rate ≤± 1% (when switching between full load and light load)
Ripple noise ≤ 50mVp-p (5V output)
Cooling method: natural air cooling/external fan assistance
Structural form: Plug in multi-layer PCB with gold finger interface
Protection functions include overvoltage, overcurrent, overtemperature, and short-circuit protection
Application scenarios
DC Motor Drive System Applied to GE
Power supply for servo controllers, speed controllers, and regulators
Suitable for large-scale industrial automation control platforms
Can be used for power upgrade or replacement of GE Mark I/II/IV systems
Compatibility and Alternative Suggestions
Recommended alternative model: 193X526AAG01 (pay attention to whether the voltage and current specifications match)
Strict verification is required when replacing: output voltage, current capability, slot compatibility, electrical protection characteristics
If the system is upgraded to a modern PLC or DCS architecture, a dedicated DC power module with a conversion interface is required
2.产 品 展 示
3.其他产品
4.其他英文产品
ABB SB822 3BSE018172R1 rechargeable
CI860K01 3BSE032444R1 power module
CI871AK01 3BSE092693R1 interface module
| PMB31B-20116-02 | NTMU02 | M21NRXE-LNF-NS-00 |
| PMB31B-20116-01 | 70 EA 04a-E | N33HCHK-LNK-NS-00 |
| PMB31B-20116-00 | 70 BA 01b | N31HRHK-LEK-SS-02 |
| PMB31B-20114-03 | AMAT 0100-00015 | PFTL301E |
| PMB31B-20114-02 | AMAT 0100-14010 | PFVL141V |
| PMB31B-20114-01 | IMFCS01 | 3BSE003816R1 SC520 |
| PMB31B-20114-00 | ICSM06A6 | N31HRFK-LNK-NS-00 |
| PMB31B-20101-03 | NKMF02-02 | M22NRXC-LDN-NS-00 |
| PMB31B-20101-02 | AMAT 0100-09210 | 57160001-UH DSTD 150 |
