Motorola 01-W3628F-01A转换电路板模块

1.产 品 资 料 介 绍：

Motorola 01-W3628F-01A VMEbus 转换电路板模块解析

一、核心技术特性

1. 多类型信号转换能力
   支持模拟信号与数字信号的双向转换（如将传感器输出的 4-20mA 模拟电流信号转为数字量，或把主控单元的数字控制指令转为模拟电压信号）；同时可实现不同逻辑电平适配（如 TTL、RS-232、RS-485 电平间的双向转换），覆盖工业场景中主流设备的信号交互需求。
2. VMEbus 深度兼容
   完全符合 VMEbus 总线标准，可作为从模块与 VME 系统中的主控板（如 MVME-162、MVME-320B）无缝协作，通过 VME 总线接收主控指令、上传转换后的数据；支持地址映射与中断响应，确保信号转换与数据传输的实时性，不拖慢系统整体响应速度。
3. 工业级可靠性设计
   采用工业级 PCB 制造工艺与耐温元器件，工作温度覆盖 -20℃~+70℃（部分版本支持 -40℃~+85℃ 宽温），可适应车间高温、户外低温、车载振动等恶劣环境；集成电磁干扰防护电路（符合 IEC 61000-4 标准），同时关键信号通道带光电隔离（隔离电压≥2500Vrms），阻断外部干扰对 VME 主控单元的影响。
4. 模块化与易用性
   采用模块化布局，信号转换单元与接口单元独立设计，可根据实际需求选择启用对应功能，避免冗余；板载拨码开关或软件配置工具，可快速设置信号转换精度、电平类型、数据传输速率等参数，无需修改硬件即可适配不同外设；配备 LED 状态灯，实时显示电源、信号转换、总线通信状态，便于现场故障排查。

Motorola 01-W3496B01适配器卡 英文资料：

Analysis of Motorola 01-W3628F-01A VMEbus Conversion Circuit Board Module

Motorola 01-W3628F-01A is an industrial grade signal conversion and interface adaptation module based on the VMEbus architecture. Its core function is to solve the problems of "incompatible signal types" and "mismatched electrical standards" in the VME system. By implementing analog/digital signal conversion and adapting to different logic levels, it builds a reliable signal bridge channel between the VME main control unit (such as single board computer, controller) and external devices, and has signal isolation capability to ensure the stable operation of the system in complex scenarios such as industry, energy, and national defense.

1、 Core technical characteristics

Multi type signal conversion capability

Support bidirectional conversion between analog and digital signals (such as converting 4-20mA analog current signals output by sensors into digital quantities, or converting digital control instructions from the main control unit into analog voltage signals); At the same time, it can achieve different logic level adaptation (such as bidirectional conversion between TTL, RS-232, RS-485 levels), covering the signal interaction requirements of mainstream devices in industrial scenarios.

VMEbus deep compatibility

Fully compliant with the VMEbus standard, it can seamlessly collaborate with the main control board (such as MVME-162, MVME-320B) in the VME system as a slave module, receiving main control instructions and uploading converted data through the VME bus; Support address mapping and interrupt response to ensure real-time signal conversion and data transmission, without slowing down the overall response speed of the system.

Industrial grade reliability design

Adopting industrial grade PCB manufacturing technology and temperature resistant components, the working temperature covers -20 ℃~+70 ℃ (some versions support a wide temperature range of -40 ℃~+85 ℃), which can adapt to harsh environments such as workshop high temperature, outdoor low temperature, and vehicle vibration; Integrated electromagnetic interference protection circuit (compliant with IEC 61000-4 standard), with key signal channels equipped with optoelectronic isolation (isolation voltage ≥ 2500Vrms) to block the impact of external interference on the VME main control unit.

Modularity and ease of use

Adopting a modular layout, the signal conversion unit and interface unit are independently designed, and corresponding functions can be selected and enabled according to actual needs to avoid redundancy; Onboard dip switch or software configuration tool, which can quickly set parameters such as signal conversion accuracy, level type, data transmission rate, etc., and can adapt to different peripherals without modifying hardware; Equipped with LED status lights, real-time display of power, signal conversion, and bus communication status for easy on-site troubleshooting.

Motorola 01-W3496B01适配器卡 产      品      展      示      

 产品视频

3.其他产品

MKS EDGE3013A发电机
A-B 80026-976-01-R直流电源模块
MKS AX8403A气体发生器

4.其他英文产品

ICS TRIPLEX T9402 Power supply module
ICS TRIPLEX T9432 Programmable module
ICS TRIPLEX T9451 Channel module

The content is from Ruichang Mingsheng Automation Equipment Co., LTD

Contact: +86 15270269218