Motorola MVME332 01-W3504B-01D数字量控制板卡
1.产 品 资 料 介 绍：
- 数字量输入通道配置
- 通道数量：推测配备 16~32 路独立数字量输入通道，支持单端输入模式，可同时采集多台外部设备的开关状态（如传感器触发信号、设备运行状态信号），满足中小型控制系统的多节点监测需求（如 16 路生产线设备的运行状态同步采集）。
- 输入信号类型：支持 TTL/CMOS 电平信号输入（典型高电平 3.3V~5V，低电平 0V~0.8V），部分通道可能兼容干接点信号（如继电器触点、限位开关触点），无需额外电平转换电路即可直接连接工业现场常见的开关类设备，简化硬件接线。
- 隔离与保护：输入通道采用光电隔离设计，隔离电压通常为 2500Vrms，有效阻断外部电路的干扰信号与电压波动对板卡内部电路的影响；同时配备过压保护电路（如 TVS 瞬态抑制二极管），可抵御输入信号端的瞬间高压冲击（如雷击感应电压），防止通道损坏。
- 采集速率：单通道最高采集速率可达 1kHz~10kHz，支持批量采集与中断触发采集模式，批量采集适用于周期性状态监测（如每秒采集一次设备运行状态），中断触发采集可快速响应外部信号变化（如传感器触发时立即采集信号），满足不同场景的实时性需求。
Motorola MVME332 01-W3504B-01D数字量控制板卡 英文资料：
Introduction to Motorola MVME332 01-W3504B-01D Digital Control Board
The Motorola MVME332 01-W3504B-01D digital control board is a specialized board in the MVME series that focuses on digital signal acquisition and control. It is designed based on the VME bus architecture and widely used in industrial automation, equipment control, and embedded systems. It has the core characteristics of "high reliability, multi-channel control, and flexible adaptation", integrating rich digital input/output channels and perfect control logic. It can accurately process switch signals in industrial sites, achieve start stop control, status monitoring, and fault alarm of external devices. It is an important hardware component for Motorola to adapt to small and medium-sized embedded systems in the field of digital control.
1、 Product Overview
The Motorola MVME332 01-W3504B-01D digital quantity control board is positioned in the mid-range digital quantity control market, focusing on solving the core requirement of "efficient control of multi-channel digital signals" in industrial scenarios. Its hardware architecture is built around high-performance digital processing chips, and through optimized signal isolation circuits, configurable I/O channel design, and deep compatibility with the VME bus standard, it achieves closed-loop management of "acquisition control feedback" - it can meet the real-time monitoring requirements of multiple device switch states in industrial production lines, equipment control cabinets, and other scenarios, and accurately issue control instructions through independent digital output channels. It is also compatible with MVME series controller modules (such as MVME162-222), reducing system integration difficulty and development costs.
This product fully considers the complex working conditions of industrial sites in its design, using industrial grade components, optoelectronic isolation technology, and anti electromagnetic interference circuits. It can withstand a certain range of temperature fluctuations (usually supporting a wide temperature range of -20 ℃~+70 ℃), voltage surges, and electromagnetic interference. It is suitable for digital control scenarios that require long-term stable operation, such as industrial equipment switch control, production line status monitoring, security system linkage control, etc. It can effectively ensure the accuracy of digital signal transmission and the reliability of control instruction execution.
2、 Technical Parameters (Based on MVME Series Characteristics and Universal Design Speculation of Digital Control Board)
Digital input channel configuration
Number of channels: It is estimated to be equipped with 16~32 independent digital input channels, supporting single ended input mode, which can simultaneously collect the switch status of multiple external devices (such as sensor trigger signals and equipment operation status signals), meeting the multi node monitoring needs of small and medium-sized control systems (such as synchronous collection of operation status of 16 production line equipment).
Input signal type: Supports TTL/CMOS level signal input (typical high level 3.3V~5V, low level 0V~0.8V), some channels may be compatible with dry contact signals (such as relay contacts, limit switch contacts), and can be directly connected to common switch devices in industrial fields without the need for additional level conversion circuits
Motorola MVME332 01-W3504B-01D数字量控制板卡 产品展示
产品视频
3.其他产品
Agilent HP5517B激光头
UNITROL 1020-0006 FULL 3BHE030579R0006控制器
UNITROL6080 3ADT218437R0002激励驱动器
4.其他英文产品
DSRF180A 57310255-AV Control framework
DSSB140 48980001-P Logic control card
DSTC175 57310001-KN Automation module
| 369-HI-0-M-F-E-0 | 531X305NTBAEG1 | IC3603A177CG5 |
| 369-HI-0-M-0-0-E | SS2000-PCI | IC3603A177CF6 |
| 369-HI-0-M-0-0 | 531X301DCCAJM1 | IC3603A177AH9 |
| 369-HI-0-B-F-D-0-E | 531X301DCCAHM1 | IC3603A177AH2 |
| 369-HI-0-B-0-0-0-0 | 531X301DCCADM1 | IC3603A177AG9 |
| 369-HI-0-0-0-0 | 531X300CCHBDM3 | IC3603A177AG2 |
| 36-0201 | 531X300CCHAXM3 | IMDSI14 |
The content is from Ruichang Mingsheng Automation Equipment Co., LTD
Contact: +86 15270269218
