邮箱:stodcdcs@gmail.com

手机/微信/WhatsApp

+86 15270269218

stodcdcs@gmail.com

Extreme X770-32Q电源模块

发布时间:2025-10-20人气:
  • Extreme X770-32Q电源模块
  • Extreme X770-32Q电源模块
  • Extreme X770-32Q电源模块

Extreme Networks  X770-32Q电源模块

1.产 品 资 料 介 绍:

一、核心参数速览
  • 型号属性:Extreme X770-32Q 是 Extreme Networks 为 Summit X770 系列模块化交换机量身设计的热插拔冗余电源模块,“X770” 明确适配高端核心交换机平台,“32Q” 隐含高功率输出特性,是保障核心设备持续运行的关键动力组件。
  • 功率规格:额定功率通常为 1100W(部分版本达 1600W,以实际型号为准),采用高效电源架构,80 PLUS Platinum 认证(推测),在 50%-100% 负载下效率超 94%,兼顾节能与稳定供电;输入电压支持 100-240V AC 宽幅适配,适配不同机房供电环境。
  • 物理特性:采用标准交换机电源模块形态,支持热插拔设计,尺寸适配 X770 系列交换机电源插槽,重量约 1.5-2kg,配备静音散热风扇,通过智能调速平衡散热与噪音控制。
二、核心功能与价值
  1. 冗余供电保障:作为 X770 系列交换机的专用电源单元,支持 1+1 或 N+1 冗余配置,主电源故障时可在毫秒级切换至备用模块,配合交换机双电源插槽设计,实现 “零中断” 供电切换,满足金融、医疗等关键业务对电源连续性的严苛要求。
  1. 高效节能设计:依托 80 PLUS 高等级认证(如 Platinum),在轻负载(20%)下效率仍达 90% 以上,大幅降低机房能耗;支持智能功耗调节,可根据交换机实际负载动态分配输出功率,避免能源浪费。
  1. 智能监控与告警:集成电源状态监测芯片,可通过 ExtremeCloud IQ 或 OneControl 管理平台实时采集输出电压、电流、温度及负载率数据;当出现过压、过流、过热等异常时,立即触发声光告警并推送通知,便于运维人员快速响应。
  1. 安全合规适配:符合 CE、UL、FCC 等国际安规标准,具备过压保护(OVP)、过流保护(OCP)、短路保护(SCP)等多重防护机制,防止电源故障波及交换机主板及其他模块;兼容 IT 设备电磁兼容(EMC)规范,避免对网络信号产生干扰。

Extreme Networks X770-32Q电源模块 英文资料:

1、 Quick overview of core parameters

Model attribute: Extreme X770-32Q is a hot swappable redundant power module designed by Extreme Networks for the Summit X770 series modular switches. "X770" is specifically adapted to high-end core switch platforms, while "32Q" implies high-power output characteristics and is a key power component to ensure the continuous operation of core equipment.

Power specifications: The rated power is usually 1100W (some versions can reach 1600W, depending on the actual model), using an efficient power architecture, certified with 80 PLUS Platinum (presumably), with an efficiency of over 94% under 50% -100% load, balancing energy saving and stable power supply; The input voltage supports 100-240V AC wide range adaptation, suitable for different power supply environments in computer rooms.

Physical characteristics: Adopting a standard switch power module form, supporting hot swappable design, size compatible with X770 series switch power slots, weighing approximately 1.5-2kg, equipped with a silent cooling fan, balancing heat dissipation and noise control through intelligent speed regulation.

2、 Core functions and values

Redundant power supply guarantee: As a dedicated power unit for X770 series switches, it supports 1+1 or N+1 redundant configuration. In case of main power failure, it can switch to the backup module in milliseconds. With the dual power slot design of the switch, it achieves "zero interruption" power supply switching, meeting the strict requirements for power continuity in key businesses such as finance and healthcare.

Efficient and energy-saving design: relying on 80 PLUS high-level certification (such as Platinum), the efficiency still reaches over 90% under light load (20%), significantly reducing the energy consumption of the computer room; Support intelligent power consumption regulation, dynamically allocate output power according to the actual load of the switch, and avoid energy waste.

Intelligent monitoring and alarm: Integrated power status monitoring chip, which can collect real-time output voltage, current, temperature, and load rate data through ExtremeCloud IQ or OneControl management platform; When there are abnormalities such as overvoltage, overcurrent, overheating, etc., immediately trigger sound and light alarms and push notifications to facilitate quick response by operation and maintenance personnel.

Safe and compliant adaptation: Complies with international safety standards such as CE, UL, FCC, etc., and has multiple protection mechanisms such as overvoltage protection (OVP), overcurrent protection (OCP), and short circuit protection (SCP) to prevent power failures from affecting switch motherboards and other modules; Compatible with electromagnetic compatibility (EMC) specifications for IT equipment to avoid interference with network signals.

Extreme Networks X770-32Q电源模块 产品展示      

extreme_summit_x670v-48t_17200_48x_10gbase-t_ports_switch_w_dual_ac_psu_2.jpg

 产品视频

3.其他产品

Cutler Hammer KW3400F输入输出模块
Allen-Bradley SST-PFB-CLX串行通信协议家族接口模块
ABB TB711FC1 3BDH000365R0001CPU终端基座

4.其他英文产品

TRICONEX MP3009X TCM 4355X processor module
TRICONEX TCM 4355X Pulse input module
VE3008 12P3439X012 KJ2003X1-BB1 module

AMAT 0190-07443AMAT 0190-07912AMAT 0190-28951
AMAT 0190-07450AMAT 0190-07917AMAT 0190-28961
AMAT 0190-07502 AMAT 0190-07969AMAT 0190-08426
AMAT 0190-07534 AMAT 0190-08048AMAT 0190-08429
AMAT 0190-07535 AMAT 0190-08054AMAT 0190-08430
AMAT 0190-07539AMAT 0190-08067AMAT 0190-08435
AMAT 0190-07558AMAT 0190-08088AMAT 0190-08437

The content is from Ruichang Mingsheng Automation Equipment Co., LTD

Contact: +86 15270269218 

推荐资讯

+86 15270269218