Extreme Networks E4G-400-AC电源模块
1.产 品 资 料 介 绍：
- 精准设备适配设计：Extreme Networks E4G-400-AC 是专为 E4G-400 系列蜂窝站点聚合路由器设计的原厂电源模块，可无缝嵌入设备背部的双电源插槽，无需额外适配即可为路由器提供稳定供电，保障设备核心功能运行。
- 300W 稳定交流输出：采用交流供电设计，额定输出功率达 300W，可满足 E4G-400 路由器满配状态下的功耗需求，包括 28 个千兆以太网端口、6 个 10G 端口及可选 TDM 模块的同时运行，适配运营商级高负载场景。
- 灵活冗余配置支持：支持与 DC 电源模块混合搭配（如主用 DC 供电 + 备用 AC 供电），也可双 AC 电源构成 N+1 冗余，当主电源故障时自动切换至备用电源，确保蜂窝站点聚合等关键业务 7×24 小时不中断。
- 宽幅电压适配能力：兼容全球主流交流电压输入范围（推测为 100-240V AC，需以官方规格为准），适配不同国家与地区的电网环境，无需额外变压器即可部署，降低跨境项目落地成本。
- 热插拔维护特性：采用热插拔设计，在冗余供电配置下更换 E4G-400-AC 模块无需关闭路由器电源，仅需使用 Phillips 螺丝刀与扭矩工具即可完成操作，配合 thermal protective gloves 防护要求，实现不停机维护。
- 多重安全防护机制：内置过流、过压及短路保护功能，可自动切断异常供电并触发告警，避免电源故障波及路由器主机；同时符合 EN 60950-1 等电气安全标准，防范电击与设备损坏风险。
- 运营商级环境适配：支持宽温工作范围（推测为 - 5℃至 45℃，适配户外机柜与机房场景），具备抗电磁干扰能力，可适应蜂窝站点、边缘机房等复杂运行环境，降低环境因素导致的供电故障。
Extreme Networks E4G-400-AC电源模块 英文资料：
Precise device adaptation design: Extreme Networks E4G-400-AC is an original power module designed specifically for the E4G-400 series cellular site aggregation router. It can be seamlessly embedded into the dual power slots on the back of the device, providing stable power supply for the router without additional adaptation, ensuring the operation of the device's core functions.
300W Stable AC Output: Designed with AC power supply, the rated output power reaches 300W, which can meet the power consumption requirements of the E4G-400 router in full configuration. It includes 28 Gigabit Ethernet ports, 6 10G ports, and optional TDM modules running simultaneously, suitable for high load scenarios at the operator level.
Flexible redundancy configuration support: Supports mixing and matching with DC power modules (such as primary DC power supply+backup AC power supply), and can also form N+1 redundancy with dual AC power supplies. When the primary power supply fails, it automatically switches to the backup power supply, ensuring that critical business such as cellular site aggregation is uninterrupted 24/7.
Wide range voltage adaptation capability: compatible with mainstream AC voltage input ranges worldwide (estimated to be 100-240V AC, subject to official specifications), adaptable to power grid environments in different countries and regions, can be deployed without the need for additional transformers, and reduces the cost of cross-border project implementation.
Hot swappable maintenance feature: Adopting a hot swappable design, replacing the E4G-400-AC module in a redundant power supply configuration does not require turning off the router power. Only Phillips screwdrivers and torque tools are needed to complete the operation, which meets the requirements of thermal protective gloves protection and achieves non-stop maintenance.
Multiple security protection mechanisms: Built in overcurrent, overvoltage, and short-circuit protection functions, which can automatically cut off abnormal power supply and trigger alarms to avoid power failure affecting the router host; Simultaneously comply with electrical safety standards such as EN 60950-1 to prevent the risk of electric shock and equipment damage.
Operator level environmental adaptation: supports a wide temperature range (estimated to be -5 ℃ to 45 ℃, suitable for outdoor cabinets and data center scenarios), has anti electromagnetic interference capability, can adapt to complex operating environments such as cellular sites and edge data centers, and reduce power supply failures caused by environmental factors.
Extreme Networks E4G-400-AC电源模块 产品展示
产品视频
3.其他产品
Alcatel-Lucent 5010 89-0411-A交换机模块
Alcatel-Lucent 53LI1A3AXX控制板
Alcatel-Lucent 3DH03131AAAG控制板
4.其他英文产品
B&R 8V1016.00-2 Industrial Control DCS System Module
B&R 8V1090.00-2 DCS spare parts module
B&R 8V1090.00-1 Digital Input Module
| 3RX1240-0AS00 | S20660-CNS | 4116J79G2 |
| 3N63-100-3 | PS-3303I-E | 4116J79-G02 |
| 3N63-100-2 | PS-3320C-E | 04199J51G0001 |
| 3N63-100-1 | CACR-SR15BE12F-E | 04136J58G0001 |
| 3N63-000-3 | 531X302DCIAPG1 | 04116J81G0001 |
| 3N63-000-2 | 531X302DCIAMG1 | 04116J79G0002 |
The content is from Ruichang Mingsheng Automation Equipment Co., LTD
Contact: +86 15270269218
