Extreme Networks EC8404001-E6以太网交换机模块
1.产 品 资 料 介 绍：
- 专用设备兼容定位：Extreme Networks EC8404001-E6 作为以太网交换机模块，推测专为 Extreme 特定系列核心或汇聚层交换机（如 EC8400 系列主机，需以官方规格为准）设计，通过标准化插槽安装，可无缝扩展主机端口数量与类型，无需重构现有网络架构即可提升设备接入能力。
- 6 口核心业务配置：结合型号中 “E6” 标识及模块类产品规律，大概率配备 6 个核心以太网端口（推测为千兆电口或 SFP 光口，具体需官方确认），适配服务器、存储设备或下级交换机的接入需求，平衡端口密度与业务承载能力，满足中小型网络分区扩展场景。
- 线速转发性能支撑：预计采用非阻塞交换架构，交换容量适配 6 个端口的速率需求（若为千兆端口，交换容量或达 12Gbps），转发速率可实现全端口线速处理，确保数据传输无瓶颈，适配企业级文件共享、视频监控等中高带宽业务场景。
- 灵活速率与介质适配：若为 SFP 光口设计，可兼容多模（850nm）、单模（1310nm）等不同类型光纤模块，传输距离覆盖 100m 至 10km 以上；若含电口则支持 10/100/1000Mbps 速率自适应，适配铜缆、光纤等不同布线环境，提升部署灵活性。
- Extreme 系统深度融合：推测兼容 ExtremeOS 操作系统（需以官方版本要求为准），可继承主机交换机的多层路由（静态路由、OSPF 等）、VLAN 划分、QoS 调度等核心功能，确保扩展后网络功能一致性，避免因模块接入导致的功能断层。
- 简化运维与监控：支持通过主机交换机的统一管理入口（Web 界面、CLI 命令行或 ExtremeCloud IQ 平台）进行配置与监控，可实时查看模块端口流量、链路状态及故障告警，配合 SNMP v2/v3 协议，实现模块与主机的协同运维，降低管理复杂度。
- 高密度扩展优势：相比独立交换机，该模块可在主机单一插槽内提供 6 个业务端口，大幅提升单位空间内的端口密度，尤其适配机房空间有限但接入需求增长的场景，减少设备部署数量，降低机房能耗与运维成本。
Extreme Networks EC8404001-E6以太网交换机模块 英文资料：
Specialized device compatibility positioning: Extreme Networks EC8404001-E6, as an Ethernet switch module, is speculated to be designed specifically for Extreme specific series core or aggregation layer switches (such as EC8400 series hosts, subject to official specifications). Through standardized slot installation, it can seamlessly expand the number and types of host ports, without the need to reconstruct the existing network architecture to improve device access capabilities.
6-port core business configuration: Based on the "E6" identification in the model and the rules of module products, it is highly likely to be equipped with 6 core Ethernet ports (presumably gigabit electrical ports or SFP optical ports, subject to official confirmation) to adapt to the access requirements of servers, storage devices, or lower level switches, balance port density and business carrying capacity, and meet the needs of small and medium-sized network partition expansion scenarios.
Line speed forwarding performance support: It is expected to adopt a non blocking switching architecture, with a switching capacity that can adapt to the speed requirements of 6 ports (if it is a gigabit port, the switching capacity may reach 12Gbps). The forwarding rate can achieve full port line speed processing, ensuring seamless data transmission and adapting to enterprise level file sharing, video surveillance and other high bandwidth business scenarios.
Flexible speed and medium adaptation: If designed as an SFP optical port, it can be compatible with different types of fiber optic modules such as multimode (850nm) and single-mode (1310nm), with transmission distances covering 100m to 10km or more; If an electrical port is included, it supports 10/100/1000Mbps rate adaptation, adapting to different cabling environments such as copper cables and optical fibers, and improving deployment flexibility.
Deep integration of Extreme system: It is speculated to be compatible with the ExtremeOS operating system (subject to official version requirements), and can inherit core functions such as multi-layer routing (static routing, OSPF, etc.), VLAN partitioning, QoS scheduling, etc. of the host switch, ensuring consistency of network functions after expansion and avoiding functional gaps caused by module access.
Simplified operation and monitoring: Supports configuration and monitoring through the unified management portal of the host switch (web interface, CLI command line, or ExtremeCloud IQ platform), allowing real-time viewing of module port traffic, link status, and fault alarms. Combined with SNMP v2/v3 protocol, it achieves collaborative operation and maintenance between modules and hosts, reducing management complexity.
Advantages of high-density expansion: Compared with independent switches, this module can provide 6 business ports in a single slot of the host, greatly increasing the port density per unit space, especially suitable for scenarios where the data center space is limited but the access demand is increasing, reducing the number of device deployments and lowering the energy consumption and operation costs of the data center.
Extreme Networks EC8404001-E6以太网交换机模块 产品展示
产品视频
3.其他产品
Alcatel-Lucent 3DH03131AAAG控制板
Alcatel-Lucent 3FE66721AB VAI2AK7NAA端口板
Alcatel-Lucent AE-37Y-2 - MDR8000控制器模块板
4.其他英文产品
B&R 8V1090.00-1 Digital Input Module
B&R 8V1045.00-2 thyristor module
B&R 8V1010.00-2 Digital Input Module
| AMAT 0190-04397 | AMAT 0190-33211 | AMAT 0190-24145 |
| AMAT 0190-04457 | AMAT 0190-33293 | AMAT 0190-24232 |
| AMAT 0190-04585 | AMAT 0190-33452 | AMAT 0190-24298 |
| AMAT 0190-04608 | AMAT 0190-33532 | AMAT 0190-24445 |
| AMAT 0190-04679 | AMAT 0190-33634 | AMAT 0190-24476 |
| AMAT 0190-04681 | AMAT 0190-33704 | AMAT 0190-24484 |
| AMAT 0190-04703 | AMAT 0190-34165 | AMAT 0190-24676 |
The content is from Ruichang Mingsheng Automation Equipment Co., LTD
Contact: +86 15270269218
