AEG Modicon AS-P933-001电源模块

AEG MODICON AS-P933-001电源模块

1.产 品 资 料 介 绍：

1. 采用 N+1 分布式冗余供电架构，AEG Modicon AS-P933-001 支持多模块并联均流，负载率控制在 66% 以下，可用性能达 99.998%，避免单点故障导致供电中断。
2. 宽幅输入电压设计（兼容 85-264V AC/120-370V DC），AEG Modicon AS-P933-001 适配全球工业供电标准，抵御电网波动与电压畸变影响。
3. 输出电压精度达 ±0.5%，纹波噪声＜50mVp-p，AEG Modicon AS-P933-001 为 PLC、I/O 模块等精密设备提供洁净稳定电源，保障控制信号精准度。
4. 内置智能温控风扇与散热通道，AEG Modicon AS-P933-001 根据负载与环境温度自动调节散热功率，兼顾散热效率与节能需求。
5. 支持热插拔功能，AEG Modicon AS-P933-001 在系统不停机状态下可更换模块，大幅降低维护停机损失。
6. 集成过压、过流、过温、短路、反接五重保护机制，AEG Modicon AS-P933-001 通过硬件熔断与软件告警双重防护，保障设备与人员安全。
7. 背板总线通讯速率恒定 12Mbps，AEG Modicon AS-P933-001 与 Quantum 系列 PLC 无缝兼容，供电信号与控制数据同步传输无衰减。
8. 工业级防护设计，工作温度范围 - 10℃-70℃，相对湿度 5%-95%（非凝露），AEG Modicon AS-P933-001 耐受粉尘、振动等恶劣工况。
9. 功率密度达 10W/cm³，紧凑型模块化结构，AEG Modicon AS-P933-001 占用控制柜空间比传统电源缩减 40%，适配密集安装需求。
10. 内置 LED 状态指示灯与故障告警接口，AEG Modicon AS-P933-001 实时反馈供电状态、负载率及故障类型，支持远程监控与报警联动。
11. 支持电源健康状态自诊断，AEG Modicon AS-P933-001 可提前预警电容老化、风扇故障等潜在问题，实现预防性维护。
12. 兼容 Modbus TCP/IP 协议，AEG Modicon AS-P933-001 可接入工业以太网，实现多电源模块集中管控与参数远程配置。
13. 具备能量回馈功能，AEG Modicon AS-P933-001 将负载停机时的再生电能反馈至电网，能耗降低 15% 以上，符合绿色工业标准。

AEG MODICON AS-P933-001电源模块 英文资料：

Adopting an N+1 distributed redundant power supply architecture, AEG Modicon AS-P933-001 supports multi module parallel current sharing, with a load rate controlled below 66% and an available performance of 99.998%, avoiding power interruption caused by single point failures.

Wide input voltage design (compatible with 85-264V AC/120-370V DC), AEG Modicon AS-P933-001 is compatible with global industrial power supply standards to resist grid fluctuations and voltage distortions.

The output voltage accuracy reaches ± 0.5%, and the ripple noise is less than 50mVp-p. AEG Modicon AS-P933-001 provides clean and stable power supply for precision equipment such as PLC and I/O modules, ensuring the accuracy of control signals.

Built in intelligent temperature control fan and cooling channel, AEG Modicon AS-P933-001 automatically adjusts the cooling power according to the load and ambient temperature, balancing cooling efficiency and energy-saving needs.

Supporting hot swapping function, AEG Modicon AS-P933-001 can ｒｅｐｌａｃｅ modules without shutting down the system, significantly reducing maintenance downtime losses.

The AEG Modicon AS-P933-001 integrates five protection mechanisms: overvoltage, overcurrent, overtemperature, short circuit, and reverse connection. It provides dual protection through hardware fuses and software alarms to ensure the safety of equipment and personnel.

The communication speed of the backplane bus is constant at 12Mbps, and the AEG Modicon AS-P933-001 is seamlessly compatible with the Quantum series PLC. The power supply signal and control data are transmitted synchronously without attenuation.

Industrial grade protection design, working temperature range -10 ℃ -70 ℃, relative humidity 5% -95% (non condensing), AEG Modicon AS-P933-001 can withstand harsh working conditions such as dust and vibration.

The power density reaches 10W/cm ³, with a compact modular structure. The AEG Modicon AS-P933-001 occupies 40% less control cabinet space than traditional power supplies, making it suitable for intensive installation needs.

Built in LED status indicator and fault alarm interface, AEG Modicon AS-P933-001 provides real-time feedback on power supply status, load rate, and fault type, supporting remote monitoring and alarm linkage.

Supporting self diagnosis of power health status, AEG Modicon AS-P933-001 can provide early warning of potential issues such as capacitor aging and fan failure, achieving preventive maintenance.

Compatible with Modbus TCP/IP protocol, AEG Modicon AS-P933-001 can be connected to industrial Ethernet to achieve centralized control and remote parameter configuration of multiple power modules.

Equipped with energy feedback function, AEG Modicon AS-P933-001 feeds back the regenerated electrical energy during load shutdown to the grid, reducing energy consumption by more than 15% and meeting green industry standards.

AEG MODICON AS-P933-001电源模块 产品展示      

 产品视频

3.其他产品

ABB LDGRB-01 3BSE013177R1数字量输入/输出模块
ABB PP846 3BSE042238R1工业触摸屏
ABB PP846A 3BSE042238R2人机界面触摸屏

4.其他英文产品

FORCE PMC234 robot card
1407-CGCMC module
ALSTOM AB121 Control card

The content is from Ruichang Mingsheng Automation Equipment Co., LTD

Contact: +86 15270269218