AEG Modicon 140DDO35300离散输出模块

AEG MODICON 140DDO35300离散输出模块

1.产 品 资 料 介 绍：

1. AEG Modicon 140DDO35300 作为 Quantum 系列离散输出模块，搭载 32 路独立输出通道，精准驱动继电器、电磁阀等工业负载。
2. 支持 24V DC 输出电压（适配 19.2-30V 宽电压范围），140DDO35300 每通道最大负载电流 0.5A，总负载可达 16A，动力储备充足。
3. AEG Modicon 140DDO35300 采用固态继电器设计，响应时间≤1 毫秒，确保工业控制指令的高速执行与切换。
4. 通道分为 4 组 8 路的模块化配置，140DDO35300 支持分组独立控制，适配多场景负载管理需求。
5. AEG Modicon 140DDO35300 具备 1780Vrms 通道与总线隔离能力，抗电磁干扰性能突出，适配复杂工业环境。
6. 内置过压抑制与 5A 组级熔断器保护，140DDO35300 可有效防范短路、过载等故障，保障系统安全。
7. AEG Modicon 140DDO35300 兼容 Modbus RTU 协议，无缝接入 Quantum EcoStruxure Control Expert 自动化平台。
8. 工作温度覆盖 - 20℃至 60℃，存储温度可达 - 40℃至 85℃，140DDO35300 适应严寒、高温等极端工况。
9. 面板配备 32 路状态 LED 与故障指示灯，AEG Modicon 140DDO35300 可直观反馈通道运行与故障状态，便于快速排查。
10. 尺寸仅 292×124×56mm，重量 1.2kg，140DDO35300 紧凑设计节省控制柜空间，安装部署便捷。
11. AEG Modicon 140DDO35300 通过 CE、UL、RoHS 等多重认证，符合国际工业标准，适配全球应用场景。
12. 支持高达 5000 米海拔运行，95% 无冷凝湿度耐受，140DDO35300 适配高海拔、高湿度工业场景。

AEG MODICON 140DDO35300离散输出模块 英文资料：

The AEG Modicon 140DDO35300, as a Quantum series discrete output module, is equipped with 32 independent output channels to accurately drive industrial loads such as relays and solenoid valves.

Supports 24V DC output voltage (suitable for a wide voltage range of 19.2-30V), with a maximum load current of 0.5A per channel for 140DDO35300, and a total load of up to 16A, with sufficient power reserve.

The AEG Modicon 140DDO35300 adopts a solid-state relay design with a response time of ≤ 1 millisecond, ensuring high-speed execution and switching of industrial control commands.

The channel is divided into 4 groups and 8 modular configurations. The 140DDO35300 supports group independent control and is suitable for multi scenario load management requirements.

The AEG Modicon 140DDO35300 has 1780Vrms channel and bus isolation capability, outstanding anti electromagnetic interference performance, and is suitable for complex industrial environments.

Built in overvoltage suppression and 5A level fuse protection, the 140DDO35300 can effectively prevent faults such as short circuits and overloads, ensuring system safety.

The AEG Modicon 140DDO35300 is compatible with the Modbus RTU protocol and seamlessly integrates with the Quantum EcoStruxure Control Expert automation platform.

The working temperature range is -20 ℃ to 60 ℃, and the storage temperature can reach -40 ℃ to 85 ℃. 140DDO35300 is suitable for extreme working conditions such as severe cold and high temperature.

The panel is equipped with 32 status LEDs and fault indicator lights. The AEG Modicon 140DDO35300 provides intuitive feedback on channel operation and fault status, making it easy to quickly troubleshoot.

The size is only 292 × 124 × 56mm, the weight is 1.2kg, and the compact design of 140DDO35300 saves control cabinet space, making installation and deployment convenient.

AEG Modicon 140DDO35300 has passed multiple certifications such as CE, UL, RoHS, etc., meeting international industrial standards and adapting to global application scenarios.

Supports operation at altitudes up to 5000 meters, with 95% non condensing humidity tolerance. The 140DDO35300 is suitable for high-altitude and high humidity industrial scenarios.

AEG MODICON 140DDO35300离散输出模块 产品展示   

 产品视频

3.其他产品

ABB XVC768115 3BHB7211R115模块
BENTLY 3500/22M 288055-01接口模块
FOXBORO FCP270 P0917YZ控制器模块

4.其他英文产品

5SHX1445H0002 3BHL000387P0101 IGCT module
BENTLY 125720-01 Card
BENTLY 125768-01 Monitor card

The content is from Ruichang Mingsheng Automation Equipment Co., LTD

Contact: +86 15270269218