AEG MODICON CGD24-130R伺服电机

AEG MODICON CGD24-130R伺服电机

1.产 品 资 料 介 绍：

1. 精准驱动无界，AEG MODICON CGD24-130R 伺服电机以微米级定位精度，破解自动化设备高精度作业难题。
2. 工业动力新标杆，AEG MODICON CGD24-130R 凭借高扭矩密度设计，小体积迸发强劲动力，适配紧凑设备布局。
3. 告别频繁维护，AEG MODICON CGD24-130R 伺服电机采用长寿命轴承与密封技术，运维周期较常规产品延长 30%。
4. 复杂工况稳如磐石，AEG MODICON CGD24-130R 抗粉尘、防溅水的 IP64 防护，轻松应对车间潮湿多尘环境。
5. 智能联动更高效，AEG MODICON CGD24-130R 支持 CANopen 总线实时通讯，与伺服控制器秒级响应协同。
6. 节能降耗先锋，AEG MODICON CGD24-130R 伺服电机采用高效铁芯设计，空载损耗降低 15%，助力绿色生产。
7. 高速启停无抖动，AEG MODICON CGD24-130R 优化电磁设计，启动响应时间＜2ms，适配高频往复运动场景。
8. 产线升级无缝衔接，AEG MODICON CGD24-130R 伺服电机兼容主流控制系统，无需重构架构即可替换老旧设备。
9. 极端温度无所惧，AEG MODICON CGD24-130R 在 - 20℃严寒至 70℃高温环境下，输出精度保持稳定无衰减。
10. 低噪运行更友好，AEG MODICON CGD24-130R 伺服电机通过动平衡优化，运行噪音≤60dB，改善车间工作环境。
11. 重载工况强支撑，AEG MODICON CGD24-130R 峰值扭矩可达额定值 3 倍，轻松驱动重型负载设备平稳运行。
12. 数据反馈更精准，AEG MODICON CGD24-130R 搭配高分辨率编码器，位置反馈精度达 1024 线 / 转，控制无偏差。
13. 模块化快装设计，AEG MODICON CGD24-130R 伺服电机采用标准法兰接口，15 分钟即可完成安装调试。
14. 跨行业通用适配，从 3C 电子装配到仓储物流分拣，AEG MODICON CGD24-130R 伺服电机全场景覆盖。
15. 安全防护全方位，AEG MODICON CGD24-130R 内置过热、过流、过载三重保护，杜绝设备运行安全隐患。

AEG MODICON CGD24-130R伺服电机 英文资料：

Precise driving without boundaries, AEG MODICON CGD24-130R servo motor achieves micrometer level positioning accuracy, solving the problem of high-precision operation of automation equipment.

The AEG MODICON CGD24-130R, a new benchmark for industrial power, features a high torque density design, unleashes powerful power in a small volume, and is suitable for compact equipment layouts.

Say goodbye to frequent maintenance, AEG MODICON CGD24-130R servo motor adopts long-life bearings and sealing technology, and the operation and maintenance cycle is extended by 30% compared to conventional products.

The AEG MODICON CGD24-130R is as stable as a rock under complex working conditions, with IP64 protection against dust and splash water, making it easy to cope with humid and dusty environments in the workshop.

Intelligent linkage is more efficient, AEG MODICON CGD24-130R supports CANopen bus real-time communication and cooperates with servo controllers in a second level response.

Energy saving and consumption reducing pioneer, AEG MODICON CGD24-130R servo motor adopts high-efficiency iron core design, reducing no-load loss by 15%, and helping green production.

High speed start stop without shaking, AEG MODICON CGD24-130R optimized electromagnetic design, startup response time<2ms, suitable for high-frequency reciprocating motion scenarios.

The production line upgrade seamlessly connects, and the AEG MODICON CGD24-130R servo motor is compatible with mainstream control systems, allowing for the replacement of old equipment without the need for architecture reconstruction.

Fearless of extreme temperatures, the AEG MODICON CGD24-130R maintains stable output accuracy without attenuation in environments ranging from -20 ℃ cold to 70 ℃ high temperature.

Low noise operation is more friendly. The AEG MODICON CGD24-130R servo motor has been optimized through dynamic balance, with a running noise of ≤ 60dB, improving the working environment in the workshop.

Strong support under heavy load conditions, the peak torque of AEG MODICON CGD24-130R can reach three times the rated value, easily driving heavy load equipment to operate smoothly.

The data feedback is more accurate. The AEG MODICON CGD24-130R is equipped with a high-resolution encoder, and the position feedback accuracy reaches 1024 lines/revolution, with no deviation in control.

Modular quick installation design, AEG MODICON CGD24-130R servo motor adopts standard flange interface, installation and debugging can be completed in 15 minutes.

Cross industry universal adaptation, from 3C electronic assembly to warehousing and logistics sorting, AEG MODICON CGD24-130R servo motor covers all scenarios.

Comprehensive safety protection, AEG MODICON CGD24-130R is equipped with triple protection against overheating, overcurrent, and overload, eliminating potential safety hazards during equipment operation.

 AEG MODICON CGD24-130R伺服电机 产品展示   

 产品视频

3.其他产品

ABB 086329-003电源模块
ABB 086329-004通讯模块
ABB 086349-002交流电源模块

4.其他英文产品

MVME5500-0163 Control card
FOXBORO 0399143 SY-0301060R Industrial control card
SY-1025115C SY-1025120E Industrial control card

The content is from Ruichang Mingsheng Automation Equipment Co., LTD

Contact: +86 15270269218