AEG MODICON ADU205模拟输入处理器
1.产 品 资 料 介 绍：
- 适配 Modicon 系列标准安装导轨，孔位与同系控制器、I/O 模块精准对齐，自然嵌入既有控制柜布局无改造成本。
- 薄型化机身设计，厚度优化适配密集型模块排列，融入多模块控制系统无空间挤占，与周边设备无缝相邻。
- 原生兼容 Modbus 工业总线协议，与主机 CPU 模块即插即通，模拟信号传输无需额外协议转换，自然衔接控制中枢。
- 宽压 DC 20-30V 供电设计，耐受工厂电源电压波动，自然匹配新旧供电系统，无需专用稳压设备。
- 插拔式端子排设计，接线与维护无需焊接，自然适配生产线快速检修与信号调整需求。
- 内置多量程信号适配功能，兼容 4-20mA、0-10V 等主流模拟信号，与传感器、变送器自然匹配，无需额外信号转换器。
- 支持 legacy 模拟量模块协议，旧系统升级时可直接替换老旧处理器，自然承接原有信号采集逻辑与校准参数。
- 低漂移信号处理电路，测量精度不受环境影响，自然融入精密计量、过程控制等高精度需求场景。
- 轻量化工程塑料外壳，重量较同功能处理器降低 15%，融入高层导轨或密集安装场景无承重压力。
- 宽温域稳定运行范围覆盖 - 15℃~65℃，自然适配化工反应釜、高温窑炉等高低温作业环境。
- 智能信号诊断功能，自动识别断线、短路等故障，自然简化模拟信号回路排查流程，提升调试效率。
- IP20 + 防尘防护设计，优化外壳密封与散热结构，自然融入粉尘较多的车间、矿山设备控制场景。
- 多通道独立采集架构，各模拟量通道互不干扰，自然适配多参数同步监测需求（如温度、压力、流量）。
- 预留信号校准接口，支持现场精准标定，自然满足工业生产中参数校准的常态化需求。
- 兼容 SCADA、DCS 上位机系统，模拟数据实时上传无延迟，自然衔接工业监控平台，实现可视化管理。
AEG MODICON ADU205模拟输入处理器 英文资料：
Compatible with Modicon series standard installation rails, the hole positions are precisely aligned with the same series controllers and I/O modules, naturally embedded in the existing control cabinet layout without any modification costs.
Thin body design, optimized thickness to adapt to dense module arrangement, integrated with multi module control system without space occupation, seamlessly adjacent to peripheral devices.
Native compatibility with Modbus industrial bus protocol, plug and play with the host CPU module, analog signal transmission does not require additional protocol conversion, and naturally connects with the control center.
Wide voltage DC 20-30V power supply design, able to withstand factory power supply voltage fluctuations, naturally matching new and old power supply systems, without the need for dedicated voltage stabilization equipment.
The plug-in terminal block design eliminates the need for welding for wiring and maintenance, naturally adapting to the rapid maintenance and signal adjustment requirements of production lines.
Built in multi range signal adaptation function, compatible with mainstream analog signals such as 4-20mA and 0-10V, naturally matching with sensors and transmitters without the need for additional signal converters.
Support legacy analog module protocol, allowing for direct replacement of old processors during system upgrades, naturally taking over the original signal acquisition logic and calibration parameters.
Low drift signal processing circuit, measurement accuracy is not affected by the environment, naturally integrated into high-precision demand scenarios such as precision metrology and process control.
Lightweight engineering plastic shell, with a weight reduction of 15% compared to processors with the same function, integrated into high-rise guide rails or dense installation scenarios without load-bearing pressure.
The wide temperature range of stable operation covers -15 ℃~65 ℃, naturally suitable for high and low temperature working environments such as chemical reaction vessels and high-temperature kilns.
Intelligent signal diagnosis function, automatically identifying faults such as wire breakage and short circuit, naturally simplifying the process of analog signal circuit troubleshooting, and improving debugging efficiency.
IP20+dustproof protection design, optimized shell sealing and heat dissipation structure, naturally integrated into the control scenarios of workshops and mining equipment with high dust content.
Multi channel independent acquisition architecture, where each analog channel does not interfere with each other, naturally adapts to multi parameter synchronous monitoring requirements (such as temperature, pressure, flow rate).
Reserved signal calibration interface, supporting precise on-site calibration, naturally meeting the normalized needs of parameter calibration in industrial production.
Compatible with SCADA and DCS upper computer systems, real-time upload of simulated data without delay, naturally connected to industrial monitoring platforms, achieving visual management.
AEG MODICON ADU205模拟输入处理器 产品展示
产品视频
3.其他产品
GE IC697CHS790机箱模块
GE IC697MDL653数字输入模块
GE IC697MDL750数字输入模块
4.其他英文产品
5SHY5055L0002 3BHE019719R0101 GVC736BE101 module
700-PKT/B Contactor module
B&R X20CP1486 CPU module
| AMAT 0100-09042 | TP-1345-1 | 8LSA35.RO030D200-0 |
| AMAT 0100-76029 | TP-1357-1 | 8111 |
| AMAT 0100-09112 | TP-1414-0 | 3625 |
| AMAT 0100-90952 | TP-1476-3 | 350-E-P1-G1-H-E-S-C-P-2E-D-N |
| AMAT 0100-76303 | TP-1501-3 | 8LSA45.R0030D000-0 |
| AMAT 0100-00039 | TP-1502-3 | 04220FL11232A |
The content is from Ruichang Mingsheng Automation Equipment Co., LTD
Contact: +86 15270269218
