AEG MODICON AS-B005-800模拟输出模块
1.产 品 资 料 介 绍：
- AEG Modicon AS-B005-800 作为工业级模拟输出模块，专为过程控制中的执行器驱动设计，操作逻辑简洁直观。
- 采用 35mm 标准导轨水平安装设计，AEG Modicon AS-B005-800 卡扣式固定无需额外工具，安装效率大幅提升。
- 支持 4-20mA 电流、0-10V 电压双类型模拟输出，AEG Modicon AS-B005-800 无需信号转换即可驱动多种执行元件。
- 接线端子采用快拆式设计，AEG Modicon AS-B005-800 可提前完成端子接线再装配，减少现场调试时间。
- 内置 galvanic 隔离保护功能，AEG Modicon AS-B005-800 有效抵御工业环境电磁干扰，保障输出信号稳定性。
- 与 Modicon AS-B 系列控制器无缝兼容，AEG Modicon AS-B005-800 无需复杂配置即可实现总线通信。
- 输出精度达 0.1% FS 级，AEG Modicon AS-B005-800 长期运行无需频繁校准，维持精准控制性能。
- 工作温度覆盖 - 25℃至 70℃宽温范围，AEG Modicon AS-B005-800 适应极端工业环境，无需额外温控措施。
- 配备电源、通信、通道状态三色指示灯，AEG Modicon AS-B005-800 故障定位直观，排查效率高。
- 支持 I/O 模块热插拔功能，AEG Modicon AS-B005-800 更换时无需系统停机，降低生产中断损失。
- 适配 10-30VDC 宽电压电源输入，AEG Modicon AS-B005-800 应对现场电压波动无需稳压附件。
AEG MODICON AS-B005-800模拟输出模块 英文资料：
As an industrial grade analog output module, AEG Modicon AS-B005-800 is designed specifically for actuator drivers in process control, with simple and intuitive operation logic.
Adopting a 35mm standard guide rail horizontal installation design, the AEG Modicon AS-B005-800 buckle type fixing does not require additional tools, greatly improving installation efficiency.
Supporting dual type analog outputs of 4-20mA current and 0-10V voltage, AEG Modicon AS-B005-800 can drive multiple actuators without signal conversion.
The terminal block adopts a quick detachable design, and the AEG Modicon AS-B005-800 can complete terminal wiring and reassembly in advance, reducing on-site debugging time.
Built in galvanic isolation protection function, AEG Modicon AS-B005-800 effectively resists electromagnetic interference in industrial environments, ensuring output signal stability.
Seamless compatibility with Modicon AS-B series controllers, AEG Modicon AS-B005-800 can achieve bus communication without complex configuration.
The output accuracy reaches 0.1% FS level, and AEG Modicon AS-B005-800 can operate for a long time without frequent calibration, maintaining precise control performance.
The working temperature covers a wide temperature range of -25 ℃ to 70 ℃, and AEG Modicon AS-B005-800 is suitable for extreme industrial environments without the need for additional temperature control measures.
Equipped with three color indicator lights for power, communication, and channel status, AEG Modicon AS-B005-800 has intuitive fault location and high troubleshooting efficiency.
Support I/O module hot plug function, AEG Modicon AS-B005-800 can be replaced without system shutdown, reducing production interruption losses.
Suitable for 10-30VDC wide voltage power input, AEG Modicon AS-B005-800 can cope with on-site voltage fluctuations without the need for voltage stabilization accessories.
AEG MODICON AS-B005-800模拟输出模块 产品展示
产品视频
3.其他产品
A-B 1771-IFE I/O 输入模块
A-B 1771-CFM控制器模块
A-B 1771-IRI/O 模块
4.其他英文产品
PFEA112-65 3BSE030369R0065 controller
ATLAS TC-4000-P-PB-ES drive
HONEYWELL CC-PAIM01 Actuator module
| PC844-001-F |  6SC6108-0SG02 | MC-GAIH84 |
| PC844-001-A | 6SC6000-0NA02 | MC-GAIH83 |
| PC843-XYZ-T | 6SC6140-0FE01 | MC-GAIH22 |
| PC843-XYZ-N | 6SC6500-0UC01 | MC-PDOX02 |
| PC843-XYZ-F | 6SC6100-0GA00 | NTDI01 |
| PC843-XYZ-A | 6SC6120-0FE00 | NKTT01-3 |
The content is from Ruichang Mingsheng Automation Equipment Co., LTD
Contact: +86 15270269218
