AEG MODICON AS-J8100-000远程 I/O 适配器
1.产 品 资 料 介 绍：
- AEG Modicon AS-J8100-000 作为工业级远程 I/O 适配器，专为控制器与远程模块通信设计，操作逻辑简洁易上手。
- 适配 24VDC 标准供电，AEG Modicon AS-J8100-000 直接接入工业直流电源，无需额外转换附件。
- 支持 Modbus 通信协议，AEG Modicon AS-J8100-000 快速搭建远程 I/O 网络，数据传输稳定可靠。
- 与 Modicon 584/984 系列控制器无缝兼容，AEG Modicon AS-J8100-000 无需复杂配置即可联动。
- 内置光学耦合隔离保护，AEG Modicon AS-J8100-000 有效抵御电压瞬变，保障系统安全。
- 工作温度覆盖 - 25℃至 70℃，AEG Modicon AS-J8100-000 适应极端工业环境，无需额外温控。
- 支持 5%-95% 非冷凝湿度，AEG Modicon AS-J8100-000 在潮湿工况下仍能稳定运行。
- 配备直观状态指示灯，AEG Modicon AS-J8100-000 实时显示通信与运行状态，排查便捷。
- 前置可访问熔断器设计，AEG Modicon AS-J8100-000 维护更换便捷，减少停机时间。
- 非导电前面板设计，AEG Modicon AS-J8100-000 使用测试探针时无触电风险，操作更安全。
- 支持热插拔更换模块，AEG Modicon AS-J8100-000 无需改动现场布线，维护效率高。
- 防护等级达 IP20，AEG Modicon AS-J8100-000 防尘防意外接触，适配控制柜内安装。
- 符合 IEEE 和 ANSI 浪涌耐受标准，AEG Modicon AS-J8100-000 抵御工业电网电压冲击。
- 通信故障 300ms 内关闭所有 I/O 点，AEG Modicon AS-J8100-000 保障系统运行安全。
- 兼容 Modicon 800 系列 I/O 模块，AEG Modicon AS-J8100-000 适用于工业自动化远程控制场景。
AEG MODICON AS-J8100-000远程 I/O 适配器 英文资料：
The AEG Modicon AS-J8100-000 is an industrial grade remote I/O adapter designed specifically for communication between controllers and remote modules, with simple and easy-to-use operating logic.
Compatible with 24VDC standard power supply, AEG Modicon AS-J8100-000 can be directly connected to industrial DC power supply without the need for additional conversion accessories.
Supporting Modbus communication protocol, AEG Modicon AS-J8100-000 can quickly set up remote I/O network, ensuring stable and reliable data transmission.
Seamless compatibility with Modicon 584/984 series controllers, AEG Modicon AS-J8100-000 can be linked without complex configuration.
Built in optical coupling isolation protection, AEG Modicon AS-J8100-000 effectively resists voltage transients and ensures system safety.
Working temperature range -25 ℃ to 70 ℃, AEG Modicon AS-J8100-000 is suitable for extreme industrial environments without the need for additional temperature control.
Supporting 5% -95% non condensing humidity, AEG Modicon AS-J8100-000 can still operate stably under humid conditions.
Equipped with intuitive status indicator lights, AEG Modicon AS-J8100-000 displays real-time communication and operation status for easy troubleshooting.
The front accessible fuse design facilitates maintenance and replacement of AEG Modicon AS-J8100-000, reducing downtime.
Non conductive front panel design, AEG Modicon AS-J8100-000 has no risk of electric shock when using test probes, making operation safer.
Supporting hot swappable module replacement, AEG Modicon AS-J8100-000 does not require on-site wiring changes and has high maintenance efficiency.
The protection level reaches IP20, and AEG Modicon AS-J8100-000 is dust-proof and anti accidental contact, suitable for installation inside control cabinets.
Compliant with IEEE and ANSI surge withstand standards, AEG Modicon AS-J8100-000 is capable of withstanding voltage surges in industrial power grids.
Close all I/O points within 300ms of communication failure, AEG Modicon AS-J8100-000 ensures safe system operation.
Compatible with Modicon 800 series I/O modules, AEG Modicon AS-J8100-000 is suitable for industrial automation remote control scenarios.
AEG MODICON AS-J8100-000远程 I/O 适配器 产品展示
产品视频
3.其他产品
A-B 2711-K10C1触摸屏显示器
A-B 1771-OJA输出模块
Kollmorgen 6410-009-N-N-N控制板
4.其他英文产品
TC512V1 3BSE018059R1 Bus module
TK803V018 3BSC950130R1 cable
5SHX2645L0004 3BHL000389P0104 IGCT card
| IS215UCVFH2AB | SE06200-000000 | IMASI03 |
| IS215ACLEH1C | S60300-NA | IMASOO1 |
| IS215ACLEH1B | SLO-SYN430P1 | INICT01 |
| IS215ACLEH1A | H3801 | 47545701 |
| IS200UCVGH1A | HH-J715-0000 | 067-10867-0001 |
| ICS TRIPLEX T3480 | SS2000IV | 6DD1842-0AA1 |
The content is from Ruichang Mingsheng Automation Equipment Co., LTD
Contact: +86 15270269218
