H01CA007适配器

H01CA007适配器 

1.产 品 资 料 介 绍：

H01CA007适配器产品特点（10条）

H01CA007是一款工业级多接口转换适配器，专为自动化设备、仪器仪表的接口适配与信号转换设计，兼容DC电源转接、协议转换功能，适配工控、数码设备联动及老旧设备升级场景，核心特点如下：

1. 多接口转换适配

支持DC圆孔与Type-C双接口双向转换，输入端适配4.5mm DC母口，输出端为Type-C公口，可实现老旧DC电源适配器为Type-C接口设备供电，无需更换电源。

2. 高功率快充支持

兼容PD3.0快充协议，支持20V4.25A高功率输出，最大输出功率可达85W，可满足笔记本电脑、工控平板等中大功率设备的供电需求。

3. 多档位电压调节

内置电压调节模块，支持5V3A、9V3A、12V5A、15V5A、20V4.25A多组固定电压档位，自动匹配设备供电需求，适配不同功率设备。

4. 高温阻燃外壳设计

采用高阻燃PC材质外壳，表面磨砂工艺处理，耐磨损且绝缘性能优异，一体式线材与本体连接处加厚注塑，抗摇摆能力强，延长使用寿命。

5. 低发热安全运行

优化散热结构设计，高负载运行时最高温度不超过36℃，仅体感温热，无明显升温现象，避免过热损坏设备，保障长期稳定供电。

6. 强抗干扰信号稳定

端子采用特制PIN脚设计，具备良好抗电磁干扰能力，在工控设备、变频器周边等强干扰环境中，仍能保持电压稳定与信号传输流畅。

7. 小巧便携易部署

体积小巧轻便，主体尺寸约78×25×13mm，重量仅43g左右，便于携带与收纳，适配桌面办公、现场工控、移动设备等多场景快速部署。

8. 多重安全防护机制

内置过压、过流、短路及过热保护电路，故障时自动切断输出，有效防护适配器自身及后端设备安全，故障排除后可自动恢复工作。

9. 宽电压输入适配

支持宽范围DC输入，适配20V5A及以下规格DC电源适配器，兼容不同品牌、不同功率的老旧DC电源，提升设备复用率，降低升级成本。

10. 多设备兼容适配

兼容主流Type-C接口设备，包括工控笔记本、智能手机、平板、便携式仪器仪表等，同时支持DCP、PD3.0等多种充电协议，通用性强。

H01CA007适配器 英文资料：

H01CA007 Adapter Product Features (10)

H01CA007 is an industrial grade multi interface conversion adapter designed specifically for interface adaptation and signal conversion of automation equipment and instruments. It is compatible with DC power conversion and protocol conversion functions, and is suitable for industrial control, digital equipment linkage, and old equipment upgrade scenarios. Its core features are as follows:

1. Multi interface conversion and adaptation

Supports bidirectional conversion between DC round hole and Type-C dual interfaces, with input compatible with 4.5mm DC female port and output compatible with Type-C male port. It can enable old DC power adapters to supply power to Type-C interface devices without the need to ｒｅｐｌａｃｅ the power supply.

2. High power fast charging support

Compatible with PD3.0 fast charging protocol, supports 20V4.25A high-power output, with a maximum output power of 85W, which can meet the power supply needs of medium and high-power devices such as laptops and industrial control tablets.

3. Multi level voltage regulation

Built in voltage regulation module, supporting multiple fixed voltage levels of 5V3A, 9V3A, 12V5A, 15V5A, and 20V4.25A, automatically matching equipment power supply requirements and adapting to different power devices.

4. High temperature flame retardant shell design

The shell is made of high flame retardant PC material, with a frosted surface treatment, which is wear-resistant and has excellent insulation performance. The connection between the integrated wire and the body is thickened and injection molded, with strong anti sway ability and extended service life.

5. Low heat and safe operation

Optimize the heat dissipation structure design, with a maximum temperature of no more than 36 ℃ during high load operation, only providing thermal sensation without significant temperature rise, avoiding equipment damage caused by overheating and ensuring long-term stable power supply.

6. Strong anti-interference signal stability

The terminal adopts a specially designed PIN pin design, which has good resistance to electromagnetic interference. It can still maintain voltage stability and smooth signal transmission in strong interference environments such as industrial control equipment and frequency converters.

7. Compact, portable, and easy to deploy

Compact and lightweight in size, with a main body size of approximately 78 × 25 × 13mm and a weight of only about 43g, it is easy to carry and store, suitable for rapid deployment in multiple scenarios such as desktop office, on-site industrial control, and mobile devices.

8. Multiple security protection mechanisms

Built in overvoltage, overcurrent, short circuit, and overheating protection circuits automatically cut off the output in case of faults, effectively protecting the safety of the adapter itself and backend equipment. After troubleshooting, it can automatically resume operation.

9. Wide voltage input adaptation

Supports wide range DC input, compatible with DC power adapters of 20V5A and below specifications, compatible with old DC power supplies of different brands and powers, improving device reuse and reducing upgrade costs.

10. Multi device compatibility and adaptation

Compatible with mainstream Type-C interface devices, including industrial control laptops, smartphones, tablets, portable instruments, etc., while supporting multiple charging protocols such as DCP and PD3.0, with strong versatility.

H01CA007适配器 产品展示

产品视频

3.其他产品

SCHNEIDER 140CPU67260PLC模块
A-B 1756-EWEB以太网网络模块
MOOG G122-824-002电液伺服阀

4.其他英文产品

VIBRO-METER 200-510-076-114 200-510-111-034 VM600 MPC4 regulator module
TRICONEX 8120E thyristor module
ABB PCD530A102 3BHE041343R0102 Controller Module

The content is from Ruichang Mingsheng Automation Equipment Co., LTD

Contact: +86 15270269218