1.产 品 资 料 介 绍：
MNN-30-100控制器产品特点及说明
一、产品概述与核心特点
MNN-30-100为工业级智能控制器，适配空压机站房、自动化配电等场景，核心特点：搭载Intelligent Core主控单元，支持多设备联动与远程控制；具备用气量预测及优先级调度功能，提升系统运行效率；内置异常报警与数据存储，抗干扰强且运行稳定。
二、核心参数
- 核心配置：集成标准分控单元，支持与多台空压机通讯，兼容远程操作与本地面板控制。
- 性能：具备设备运行时间均衡功能，可预设报警机制，实时采集压力、频率等运行数据并存储。
- 安装：导轨式固定，适配工业控制箱布局，支持多协议通信接口，便于系统集成与扩展。
三、工作原理
接收上位机指令或现场传感器信号，通过主控单元解析运算，实现空压机加载/卸载调度及运行状态管控。依托数据采集与预测算法，提前调节设备工况，同时实时监测运行参数，异常时触发预设报警并存储信息，保障系统高效稳定运行。
四、安装与调试要点
- 安装：固定牢固避免振动，规范接线并做好标识，通信线路与动力线路分开布设，保证绝缘可靠。
- 调试：设定设备优先级与报警阈值，测试远程通讯稳定性，校准压力、频率等采集参数。
五、安全维护与故障排除
- 安全：操作必断电防静电，接线前核对相序与电压，避免违规操作损坏模块。
- 维护：定期巡检接线牢固度与模块温升，清理表面粉尘，复核参数设置与数据存储功能。
- 故障：无输出查电源与通讯链路，报警异常查阈值设置，数据采集故障查传感器连接。
MNN-30-100控制器 英文资料：
Characteristics and Description of MNN-30-100 Controller Product
1、 Product Overview and Core Features
MNN-30-100 is an industrial grade intelligent controller that is suitable for scenarios such as air compressor station buildings and automated power distribution. Its core features include the Intelligent Core main control unit, which supports multi device linkage and remote control; Equipped with gas consumption prediction and priority scheduling functions to improve system operational efficiency; Built in abnormal alarm and data storage, strong anti-interference and stable operation.
2、 Core parameters
-Core configuration: Integrated standard sub control unit, supports communication with multiple air compressors, compatible with remote operation and local panel control.
-Performance: Equipped with device runtime balancing function, preset alarm mechanism, real-time collection and storage of operating data such as pressure and frequency.
-Installation: rail type fixed, suitable for industrial control box layout, supports multi protocol communication interfaces, and facilitates system integration and expansion.
3、 Working principle
Receive instructions from the upper computer or signals from on-site sensors, and use the main control unit to analyze and calculate the loading/unloading scheduling and operation status control of the air compressor. Rely on data acquisition and prediction algorithm, adjust equipment working conditions in advance, and monitor operating parameters in real time, trigger preset alarm and store information in case of abnormality, so as to ensure efficient and stable operation of the system.
4、 Key points for installation and debugging
-Installation: Fix firmly to avoid vibration, standardize wiring and label properly, separate communication lines from power lines to ensure reliable insulation.
-Debugging: Set device priority and alarm threshold, test remote communication stability, calibrate acquisition parameters such as pressure and frequency.
5、 Safety maintenance and troubleshooting
-Safety: Power off and anti-static measures must be taken during operation. Before wiring, check the phase sequence and voltage to avoid damaging the module due to unauthorized operation.
-Maintenance: Regularly inspect the firmness of wiring and module temperature rise, clean surface dust, review parameter settings and data storage functions.
-Fault: No output, check the power supply and communication link, check the threshold setting for alarm abnormalities, and check the sensor connection for data collection faults.
MNN-30-100控制器 产品展示
产品视频
3.其他产品
Foxboro FBM219 P0916RH输入/输出模块
Foxboro P0904AKI/O接口模块
WOODWARD 8444-1067PLC模块
4.其他英文产品
SYN5202-0271 Signal Processing Board
NI PXIE-8861 Embedded Controller
MOTOROLA MVME55006E-0161R Processing Board Controller
| PCE833-001-T |  GESPAC PIA-2A | MC-TAIL02 |
| PCE833-001-N | 6SC6101-2A-Z | MC-TAIL12 |
| PCE833-001-A | 6SC6111-2AA00 | MC-TAIH02 |
| PCE800 | 6SC9837-0KA01 | MC-TDODI3 |
| PCD231B PCD231B101 3BHE025541R0101 | 6SC6100-0GB00 | MC-TAIH22 |
| PC844-XYZ-T | 6SC6130-0FE01 | MC-PC1X02 |
| PC844-XYZ-N | 6SC6130-0FE00 | MC-PAOY22 |
The content is from Ruichang Mingsheng Automation Equipment Co., LTD
Contact: +86 15270269218
