193X238AAG01信号隔离器

GE   193X238AAG01信号隔离器

1.产 品 资 料 介 绍：

中文资料：

193X238AAG01 信号隔离器（Signal Isolator）

产品概述
193X238AAG01 是 GE（General Electric）193X 系列工业控制板卡中的一款专用信号隔离器模块，主要用于模拟或数字信号在不同电位系统之间的安全隔离与传输。它可防止接地回路干扰、电气噪声或高压反灌影响主控系统，确保控制系统的稳定与可靠运行。

主要功能特点

• 信号电气隔离：实现输入与输出通道之间的完全电气隔离，典型隔离电压可达 2500V。

• 多种信号兼容：支持电压、电流、开关量等多种工业信号形式。

• 低漂移、高精度：内部采用精密隔离放大器，保持输入信号的线性度与准确性。

• 增强型抗干扰：内置滤波与抑噪电路，特别适合高干扰工业环境应用。

• 板载诊断功能：具备信号故障指示，可监测输入异常、信号中断等状态。

技术参数

• 输入信号：0–10V DC、4–20mA、±5V、±10V（依据配置）

• 输出信号：与输入线性对应，电压或电流形式

• 隔离电压：最小 1500V RMS，典型 2500V RMS（输入-输出-电源间）

• 响应时间：<10ms，适用于工业控制实时反馈

• 精度：±0.1% FS，适合精密控制场合

• 温度范围：-20°C 至 +70°C

• 电源要求：±15V DC 或 24V DC（由系统母板供电）

• 安装结构：插槽式安装，兼容 GE 193X 控制架系统

英文资料：

193X238AAG01 Signal Isolator

product overview

193X238AAG01 is a dedicated signal isolator module in the GE (General Electric) 193X series industrial control board, mainly used for safe isolation and transmission of analog or digital signals between different potential systems. It can prevent interference from grounding circuits, electrical noise, or high voltage backflow from affecting the main control system, ensuring the stable and reliable operation of the control system.

Main functional features

Signal electrical isolation: achieving complete electrical isolation between input and output channels, with a typical isolation voltage of up to 2500V.

Multiple signal compatibility: supports various industrial signal forms such as voltage, current, and switch quantity.

Low drift, high precision: The internal adopts a precision isolation amplifier to maintain the linearity and accuracy of the input signal.

Enhanced anti-interference: Built in filtering and noise suppression circuit, especially suitable for high interference industrial environment applications.

Onboard diagnostic function: It has signal fault indication and can monitor input abnormalities, signal interruptions, and other states.

Technical Parameter

Input signal: 0-10V DC, 4-20mA, ± 5V, ± 10V (depending on configuration)

Output signal: linearly corresponding to the input, in the form of voltage or current

Isolation voltage: minimum 1500V RMS, typical 2500V RMS (input-output power supply)

Response time:< 10ms, suitable for real-time feedback in industrial control

Accuracy: ± 0.1% FS, suitable for precision control applications

Temperature range:- 20 ° C to+70 ° C

Power requirement: ± 15V DC or 24V DC (powered by the system motherboard)

Installation structure: slot type installation, compatible with GE 193X control rack system

2.产      品      展      示      

3.其他产品

INDRAMAT TDM1.3-050-300-W1-000 驱动模块

HIRSCHMANN ENT-10515-R AC通讯卡

HIRSCHMANN MS3124-4通信模块

4.其他英文产品

531X121PCRALG1Outputmodule

D20EME10BASE-Tdigitalquantitycontrolmodule

D20MIC10BASE-TSCRmodule