邮箱:stodcdcs@gmail.com

手机/微信/WhatsApp

+86 15270269218

stodcdcs@gmail.com

TEL Tokyo Electron 2981-600310-12直流转换器板

发布时间:2025-06-23人气:
  • TEL Tokyo Electron  2981-600310-12直流转换器板
  • TEL Tokyo Electron  2981-600310-12直流转换器板
  • TEL Tokyo Electron  2981-600310-12直流转换器板

TEL Tokyo Electron  2981-600310-12直流转换器板 

1.产 品 资 料 介 绍:

中文资料:

TEL Tokyo Electron 2981-600310-12 直流转换器板简介

  1. 产品定义
    2981-600310-12 是一款直流-直流转换器板(DC-DC Converter Board),用于在TEL设备中将输入直流电压转换为设备内部其他所需电压等级,提供稳定的多路供电。

  2. 主要功能
    将主电源输入(如24V DC)转换为其他电压输出(如±12V、+5V等),供给控制板、传感器、通信模块等内部电路使用。

  3. 典型应用设备
    应用于 Tokyo Electron 的晶圆处理设备,如 CVD(化学气相沉积)、Etch(蚀刻)、Clean Track(清洗)、ALD(原子层沉积)等系统。

  4. 供电目标模块
    为PLC控制板、接口板、IO模块、传感器单元、信号采集器等低电压设备提供稳定供电。

  5. 产品特点

    • 多通道DC输出(可能有±12V、+5V等)

    • 具备过压、过流、短路保护

    • 高转换效率,发热量低

    • 模块化板卡结构,便于安装与维护

  6. 安装位置
    一般安装于控制电源架或主控制柜内部,靠近主控电源输出区或IO分配板。

  7. 应用场景

    • 精密控制系统中对不同逻辑电平需求的电路板供电

    • 为光电传感器、显示屏、控制器等提供隔离电源

    • 起到电源电压隔离、抑制干扰的作用,提高设备电气安全性

英文资料:

Introduction to TEL Tokyo Electron 2981-600310-12 DC Converter Board

Product definition:

2981-600310-12 is a DC-DC Converter Board used to convert input DC voltage into other required voltage levels within TEL devices, providing stable multi-channel power supply.


Main functions:

Convert the main power input (such as 24V DC) into other voltage outputs (such as ± 12V,+5V, etc.) for use in internal circuits such as control boards, sensors, and communication modules.


Typical application devices:

Applied to wafer processing equipment of Tokyo Electron, such as CVD (chemical vapor deposition), Etch (etching), Clean Track (cleaning), ALD (atomic layer deposition) and other systems.


Power supply target module:

Provide stable power supply for low-voltage devices such as PLC control boards, interface boards, IO modules, sensor units, signal collectors, etc.


Product features:


Multi channel DC output (may have ± 12V,+5V, etc.)


Equipped with overvoltage, overcurrent, and short-circuit protection


High conversion efficiency, low heat generation


Modular board structure for easy installation and maintenance


Installation location:

Generally installed inside the control power rack or main control cabinet, close to the main control power output area or IO distribution board.


Application scenarios:


Power supply for circuit boards with different logic level requirements in precision control systems


Provide isolated power supply for photoelectric sensors, display screens, controllers, etc


Plays a role in isolating power supply voltage, suppressing interference, and improving equipment electrical safety

2.产      品      展      示      

2981-600310-12_tel_dc-dc_conversion_board_tokyo_electron_tel_4.jpg

3.其他产品

IS215UCCCM04AB 控制器板

ADLINK  CPS-H325/24 电源模块

KJ3222X1-BA1模拟输入模块

4.其他英文产品

HAAS 93-32-3550J Intelligent Driver

ABB CHBX01R 2VAA008575R1 redundant modul

Schneider 140CP43412A Controller Module

IC3600SFKA1B531X300CCHAHM2IC3600SSLB1
IC3600SFKA1531X300CCHAGM5IC3600SSLA1C
IC3600SFIB1D531X300CCHAGM2IC3600SSLA1
IC3600SFIB1531X300CCHAFM5IC3600SSKE1A1B
IC3600SDAB7531X300CCHAFG1IC3600SSKE
IC3600SCZA1531X300CCHAEM5IC3600SSKC1E1B
IC3600SCBN2A531X300CCHAEM2IC3600SSKC1
IC3600SCBN1B531X300CCHADM5IC3600SSKB1

The content is from Ruichang Mingsheng Automation Equipment Co., LTD

Contact: +86 15270269218

推荐资讯

+86 15270269218