邮箱:stodcdcs@gmail.com

手机/微信/WhatsApp

+86 15270269218

stodcdcs@gmail.com

TEL Tokyo Electron 381-640994-2控制单元

发布时间:2025-06-26人气:587
  • TEL Tokyo Electron  381-640994-2控制单元
  • TEL Tokyo Electron  381-640994-2控制单元
  • TEL Tokyo Electron  381-640994-2控制单元

TEL Tokyo Electron 381-640994-2控制单元

1.产 品 资 料 介 绍:

中文资料:

一、基本信息

  • 产品型号:381-640994-2

  • 产品名称:控制单元(Control Unit)

  • 制造商:Tokyo Electron Limited(TEL)

  • 部件类别:主控制或分布式控制模块

  • 版本号:-2(代表该控制单元的特定硬件修订)


二、主要功能

该控制单元是 TEL 半导体设备中的核心控制组件之一,通常承担以下任务:

功能分类说明
设备主控处理来自上位系统的命令,控制设备运行流程和执行状态
信号协调管理并协调多个输入/输出模块的数据传输与控制指令
工艺逻辑控制根据预设工艺步骤,发出启动、加热、真空、气体流等动作控制
通信桥接连接 HMI、上位机、传感器和执行器等模块,实现数据交互
故障处理检测异常状态并触发报警、停机或自保护机制

三、典型应用领域

此类控制单元广泛用于 TEL 的晶圆处理设备中,具体包括:

  • 光刻前后处理设备(如 Clean Track ACT 系列)
    控制显影臂动作、升降台、喷涂系统和干燥加热单元等

  • CVD / Etch 系统(如 Tactras、Trias 系列)
    管理温度、真空、气体控制回路等复杂工艺子系统

  • 搬运/真空系统(Loadport / Transfer Modules)
    协调机械手、腔体门、气密系统等模块的动作时序和互锁逻辑

英文资料:

1、 Basic Information

Product model: 381-640994-2


Product Name: Control Unit


Manufacturer: Tokyo Electron Limited (TEL)


Component category: Main control or distributed control module


Version number: -2 (representing specific hardware revisions for this control unit)


2、 Main functions

This control unit is one of the core control components in TEL semiconductor equipment, typically responsible for the following tasks:


Functional classification description

The device master controls the operation process and execution status of the device by processing commands from the upper system

Signal coordination management and coordination of data transmission and control instructions for multiple input/output modules

Process logic control: Based on preset process steps, control actions such as startup, heating, vacuum, gas flow, etc. are issued

Communication bridging connects modules such as HMI, upper computer, sensors, and actuators to achieve data exchange

Fault handling detects abnormal states and triggers alarm, shutdown or self-protection mechanisms


3、 Typical application areas

This type of control unit is widely used in TEL's wafer processing equipment, including:


Photolithography pre-processing and post-processing equipment (such as Clean Track ACT series)

Control the action of the developing arm, lifting platform, spraying system, and drying heating unit, etc


CVD/Etch systems (such as Tactras, Trias series)

Manage complex process subsystems such as temperature, vacuum, and gas control circuits


Loading port/Transfer modules

Coordinate the action timing and interlock logic of modules such as robotic arms, chamber doors, and airtight systems

2.产      品      展      示      

used_tel_tokyo_electron_limited_tvme-uio_2_381-640994-2_free_shipping.jpg

3.其他产品

Advantech PCL-81601采集板

A-B 1794-IRT8XT 继电器输出模块

GE  IS420PUAAH1A  以太网交换机

4.其他英文产品

IC3600SVZA1B control board

ASEA SNAT-7902 inverter

DS200TCEAG1BNE emergency overspeed board

073-451386-00531X302DCIBAG402-408298-00
073-451126-00531X302DCIBAG36DD1684-0CH0
073-404555-0003-10639-0019-00130-00
073-404423-0002-00152-0003-056746-00
073-404337-00193X802AAG016DD1684-0FD0
073-404227-006DD1684-0DB26DD1684-0GH0

The content is from Ruichang Mingsheng Automation Equipment Co., LTD

Contact: +86 15270269218

推荐资讯

+86 15270269218