GIDDINGS & LEWIS M.1015.7922伺服驱动器

 GIDINGS&LEWIS  M.1015.7922伺服驱动器

1.产 品 资 料 介 绍：

产品概述

技术特性（典型参数）

1. 模块类型：标准伺服驱动模块（Servo Drive Module），适配多数工业伺服电机控制需求。
2. 主要功能：
   • 精准驱动伺服电机，可根据系统指令灵活调节电机速度、定位位置及输出扭矩，满足不同工况下的运动控制要求。
   • 内置闭环控制逻辑，结合反馈信号实时修正电机运行参数，有效抵消外部干扰，确保控制精度与稳定性。
   • 配备完善的电机保护机制，当检测到过流、过压、过热等异常情况时，会快速触发保护动作，切断危险输出，避免电机与驱动器受损。
3. 输入 / 输出：具备良好兼容性，可顺畅接收数字控制板的指令信号与模拟输出模块的调节信号，同时稳定输出驱动电机的控制信号，实现与系统其他模块的无缝协同。
4. 反馈支持：兼容编码器、解析器等常见反馈设备，能实时采集电机运行状态数据（如转速、位置），并反馈至控制回路，为闭环控制提供准确依据，保障电机运行精度。
5. 电源需求：采用工业通用 AC/DC 电源输入方式，具体输入电压与电流规格需根据所驱动伺服电机的功率、额定参数匹配，确保供电与负载需求适配，避免功率不足或过载问题。
6. 环境条件：
   • 工作温度适应范围为 0°C ~ 55°C，可在多数工业车间、生产现场的温度环境下稳定工作，无需额外复杂温控设备。
   • 湿度耐受范围为 5% ~ 95%（无凝露），能抵御潮湿环境影响，减少因湿度导致的电路故障，延长设备使用寿命。

英文资料：

Product Overview

Giddings&Lewis M.1015.7922 servo drive is an industrial grade drive device designed specifically for high-precision control scenarios in industry. Its core function is to provide precise and adaptable current, voltage, and pulse signals for servo motors, and to achieve precise control of motor speed, position, and torque through a closed-loop adjustment mechanism. Whether it is in CNC machine tools with strict requirements for machining accuracy, or in robots and automated production lines that are sensitive to action response speed, this driver can stably perform. As a key execution unit of CNC and automation control systems, it ensures that equipment runs efficiently and accurately according to preset instructions, and is the core support for industrial automation equipment to achieve high-precision motion control.

Technical characteristics (typical parameters)

Module type: Standard Servo Drive Module, suitable for most industrial servo motor control requirements.

Main functions:

Precision driven servo motors can flexibly adjust motor speed, positioning position, and output torque according to system instructions to meet motion control requirements under different working conditions.

Built in closed-loop control logic, combined with feedback signals to adjust motor operating parameters in real-time, effectively canceling external interference and ensuring control accuracy and stability.

Equipped with a comprehensive motor protection mechanism, when abnormal conditions such as overcurrent, overvoltage, and overheating are detected, the protection action will be quickly triggered to cut off dangerous outputs and prevent damage to the motor and driver.

Input/Output: With good compatibility, it can smoothly receive command signals from the digital control board and adjustment signals from the analog output module, while stably outputting control signals for the driving motor, achieving seamless collaboration with other modules in the system.

Feedback support: Compatible with common feedback devices such as encoders and parsers, capable of real-time collection of motor operation status data (such as speed and position) and feedback to the control loop, providing accurate basis for closed-loop control and ensuring motor operation accuracy.

Power requirement: Industrial universal AC/DC power input method is adopted. The specific input voltage and current specifications need to be matched according to the power and rated parameters of the driven servo motor to ensure that the power supply is compatible with the load requirements and avoid power shortage or overload problems.

Environmental conditions:

The working temperature adaptation range is 0 ° C~55 ° C, which can work stably in most industrial workshops and production sites without the need for additional complex temperature control equipment.

The humidity tolerance range is 5% to 95% (no condensation), which can resist the influence of humid environment, reduce circuit failures caused by humidity, and extend the service life of equipment.

2.产      品      展      示      

3.其他产品

MC-4/11/03/400 伺服驱动器

Bachmann IPC1412 FRE CM1G1 1G CF8G XPE通信处理器

IS200AEPGG1AAA 继电器输出模块

4.其他英文产品

GESAS CAN-DCM digital amplifier module

GE IS210BPPBH2CAA Printed Circuit Board

GE IS200AEPAH1AFD Turbine Control Module

The content is from Ruichang Mingsheng Automation Equipment Co., LTD

Contact: +86 15270269218