Extreme Networks NX-5500-100R0-WR交换机模块
1.产 品 资 料 介 绍：
- NX 系列核心设备专属适配：Extreme Networks NX-5500-100R0-WR 作为高端交换机模块，推测专为 NX-5500 系列核心交换机设计，通过标准化业务插槽安装，可无缝扩展主机广域网接入能力与端口密度，无需重构核心网络架构即可升级，保障与 NX 系列设备的硬件兼容性及系统协同性。
- 广域网优化端口配置：结合型号中 “WR”（Wide Area Network 相关）标识，大概率配备多类型广域网适配端口，可能包含 SFP/SFP + 光口与 Combo 光电复用口组合，支持千兆至万兆速率切换，适配专线、光纤等不同广域网接入介质，满足企业总部与分支机构的长距离互联需求。
- 高带宽线速转发性能：采用非阻塞交换架构，交换容量预计达 200Gbps 以上，转发速率超 148Mpps，可匹配万兆端口与广域网流量的线速处理需求，配合 NX 系列主机的高性能背板，确保跨区域数据传输、云端业务访问等场景无延迟，适配核心层高负载业务。
- 多介质与速率灵活适配：SFP/SFP + 光口支持多模（850nm）、单模（1310nm/1550nm）光纤模块，传输距离覆盖 100m 至 100km 以上；Combo 口可根据布线环境灵活切换电口（10/100/1000Base-T）或光口模式，强制指定工作模式可避免连接介质变更导致的对接失败，提升部署灵活性。
- 广域网协议深度兼容：预计深度适配 BGP、OSPF 等动态路由协议及 MPLS VPN 技术，支持广域网流量优化与 QoS 调度，可实现跨区域网络的路由收敛与业务隔离，同时兼容 IPv4/IPv6 双栈，满足下一代广域网的协议升级需求，确保与分支机构网络无缝互通。
- 智能堆叠与冗余扩展：支持与同型号模块或 NX 系列其他模块组建链路聚合（LAG），通过绑定多端口提升上行带宽与冗余能力，避免单点链路故障；部分场景可配合主机实现堆叠扩展，将多模块虚拟化为单一逻辑节点，简化广域网接入层的运维管理。
- 统一化智能管理体系：支持通过 NX 系列主机的统一管理入口（Web、CLI、ExtremeCloud IQ 平台）进行配置，可实时监控模块端口流量、广域网链路状态及故障信息；兼容 SNMP v3 协议与远程诊断功能，配合邮件、短信告警机制，实现广域网接入的精细化运维。
Extreme Networks NX-5500-100R0-WR交换机模块 英文资料：
NX series core equipment exclusive adaptation: Extreme Networks NX-5500-100R0-WR, as a high-end switch module, is speculated to be designed specifically for NX-5500 series core switches. Through standardized business slot installation, it can seamlessly expand the host wide area network access capability and port density, and can be upgraded without reconstructing the core network architecture, ensuring hardware compatibility and system synergy with NX series equipment.
Wide Area Network Optimization Port Configuration: Based on the "WR" (Wide Area Network related) identification in the model, it is highly likely to be equipped with multiple types of wide area network adaptation ports, which may include SFP/SFP+optical ports and Combo optical multiplexing port combinations, supporting gigabit to 10G rate switching, adapting to different wide area network access media such as dedicated lines and fiber optics, and meeting the long-distance interconnection needs of enterprise headquarters and branch offices.
High bandwidth line speed forwarding performance: Adopting a non blocking switching architecture, the expected switching capacity is over 200Gbps, and the forwarding rate exceeds 148Mpps, which can match the line speed processing requirements of 10 Gigabit ports and wide area network traffic. Combined with the high-performance backplane of NX series hosts, it ensures no delay in cross regional data transmission, cloud business access and other scenarios, and adapts to core layer high load business.
Multi medium and rate flexible adaptation: SFP/SFP+optical ports support multimode (850nm) and single-mode (1310nm/1550nm) fiber modules, with transmission distances covering 100m to 100km or more; Combo port can flexibly switch between electrical port (10/100/1000Base-T) or optical port modes according to the wiring environment. Forcefully specifying the working mode can avoid docking failures caused by changes in the connection medium and improve deployment flexibility.
Wide Area Network Protocol Deep Compatibility: It is expected to deeply adapt dynamic routing protocols such as BGP, OSPF, and MPLS VPN technology, support wide area network traffic optimization and QoS scheduling, achieve cross regional network routing convergence and business isolation, and be compatible with IPv4/IPv6 dual stack to meet the protocol upgrade requirements of the next generation of wide area networks, ensuring seamless interoperability with branch networks.
Intelligent stacking and redundancy expansion: supports link aggregation (LAG) with modules of the same model or other NX series modules, improves upstream bandwidth and redundancy capability by binding multiple ports, and avoids single point link failures; Some scenarios can be combined with the host to achieve stacked expansion, virtualizing multiple modules into a single logical node, simplifying the operation and maintenance management of the wide area network access layer.
Unified intelligent management system: supports configuration through the unified management portal of NX series hosts (Web, CLI, ExtremeCloud IQ platform), which can monitor module port traffic, wide area network link status, and fault information in real time; Compatible with SNMP v3 protocol and remote diagnostic function, combined with email and SMS alarm mechanism, to achieve refined operation and maintenance of wide area network access.
Extreme Networks NX-5500-100R0-WR交换机模块 产品展示
产品视频
3.其他产品
GFD233A103 3BHE022294R0103 控制器
FOXBORO P0926GV FBM231 冗余通信模块
IC695CPE400-ABAB 以太网端口模块
4.其他英文产品
B&R 8V1010.50-2 servo driver module
B&R 5AP920.1505-01 Touch Pad Module
B&R 5AP1151.0573-000 Operation Panel
| AMAT 0190-06741 | AMAT 0190-35426 | AMAT 0190-28126 |
| AMAT 0190-06857 | AMAT 0190-35438 | AMAT 0190-28182 |
| AMAT 0190-06874 | AMAT 0190-35439 | AMAT 0190-28262 |
| AMAT 0190-06926 | AMAT 0190-35448 | AMAT 0190-28291 |
| AMAT 0190-069764 | AMAT 0190-35451 | AMAT 0190-28484 |
| AMAT 0190-07213 | AMAT 0190-35451-p1 | AMAT 0190-28554 |
The content is from Ruichang Mingsheng Automation Equipment Co., LTD
Contact: +86 15270269218
