AEG MODICON AS-B810-008隔离输出模块
1.产 品 资 料 介 绍：
- AEG Modicon AS-B810-008 作为 8 路隔离输出模块，专为工业离散信号驱动设计，操作逻辑简洁易上手。
- 采用 DIN 标准水平导轨安装，AEG Modicon AS-B810-008 卡扣式固定无需专业工具，装配效率高。
- 支持 115VAC 输出电压，AEG Modicon AS-B810-008 可直接驱动对应工业执行器，无需电压转换附件。
- 与 Modicon AS-B 系列控制器无缝兼容，AEG Modicon AS-B810-008 无需复杂配置即可稳定通信。
- 内置通道隔离保护功能，AEG Modicon AS-B810-008 有效避免回路干扰，保障输出信号安全稳定。
- 接线端子可拆卸设计，AEG Modicon AS-B810-008 可提前完成端子接线再装配，减少现场调试时间。
- 工作温度覆盖 0℃至 60℃，AEG Modicon AS-B810-008 适应常规工业环境，无需额外温控措施。
- 支持 80% 非冷凝湿度环境，AEG Modicon AS-B810-008 在潮湿工况下仍能稳定运行。
- 模块化独立结构，AEG Modicon AS-B810-008 故障时可单独更换，降低维护成本与停机时间。
- 配备电源、通信及通道状态指示灯，AEG Modicon AS-B810-008 故障定位直观，排查效率高。
- 端子具备防误插保护，AEG Modicon AS-B810-008 避免接线错误导致的设备损坏，新手也能操作。
- 适配清洁室内工业场景，AEG Modicon AS-B810-008 无腐蚀性环境下使用寿命更长。
- 安装海拔最高可达 1000 米（无降容），AEG Modicon AS-B810-008 适配多数工业厂房环境。
AEG MODICON AS-B810-008隔离输出模块 英文资料：
AEG Modicon AS-B810-008, as an 8-channel isolated output module, is designed specifically for industrial discrete signal driving, with a simple and easy-to-use operating logic.
Adopting DIN standard horizontal rail installation, AEG Modicon AS-B810-008 snap on fixing does not require professional tools, with high assembly efficiency.
Supporting 115VAC output voltage, AEG Modicon AS-B810-008 can directly drive corresponding industrial actuators without the need for voltage conversion accessories.
Seamlessly compatible with Modicon AS-B series controllers, AEG Modicon AS-B810-008 can communicate stably without complex configuration.
Built in channel isolation protection function, AEG Modicon AS-B810-008 effectively avoids loop interference and ensures safe and stable output signals.
The wiring terminal is designed to be detachable, and AEG Modicon AS-B810-008 can complete terminal wiring and reassembly in advance, reducing on-site debugging time.
The working temperature ranges from 0 ℃ to 60 ℃, and AEG Modicon AS-B810-008 is suitable for conventional industrial environments without the need for additional temperature control measures.
Supporting 80% non condensing humidity environment, AEG Modicon AS-B810-008 can still operate stably under humid conditions.
Modular independent structure, AEG Modicon AS-B810-008 can be replaced separately in case of failure, reducing maintenance costs and downtime.
Equipped with power, communication, and channel status indicator lights, AEG Modicon AS-B810-008 has intuitive fault location and high troubleshooting efficiency.
The terminal is equipped with anti misoperation protection, and AEG Modicon AS-B810-008 avoids equipment damage caused by wiring errors. It can also be operated by beginners.
Suitable for clean indoor industrial scenarios, AEG Modicon AS-B810-008 has a longer service life in non corrosive environments.
The installation altitude can reach up to 1000 meters (without capacity reduction), and AEG Modicon AS-B810-008 is suitable for most industrial plant environments.
AEG MODICON AS-B810-008隔离输出模块 产品展示
产品视频
3.其他产品
ABB GDC801B101 3BHE051592R0101气体密度控制器
GE IS220PAICH2A模拟输入输出模块
GE IC698CPE030控制器模块
4.其他英文产品
BENTLY 3500/15 106M1079-01 Power supply module
DSSR122 4899001-NK Control module
EATON XV-440-10TVB-1-20 Operation display panel
| K33HCHJ-LNK-NS-00 | AMAT 0100-90702 | IMASI23 |
| K32HSFL-LNK-NS-02 | AMAT 0100-3527 | 3500/91-01-02-00 |
| K32HRLM-LNK-NS-00 | AMAT 0100-09306 | 135489-01 |
| K32HRLG-LNK-NS-00 | AMAT 0100-00175 | 84933-02 |
| K32HRHK-LNK-NS-00 | AMAT 0100-01704 | IMFCS01 |
| K32HRHJ-LSS-NS-02 | AMAT 0100-90977 | IMFEC12 |
The content is from Ruichang Mingsheng Automation Equipment Co., LTD
Contact: +86 15270269218
