AEG MODICON AS-B806-032输出模块
1.产 品 资 料 介 绍：
- AEG Modicon AS-B806-032 作为 32 路工业输出模块，专为多执行器驱动设计，操作逻辑简洁易上手。
- 采用 DIN 标准水平导轨安装，AEG Modicon AS-B806-032 卡扣式固定无需专业工具，装配效率高。
- 支持 120VAC 输出电压，兼容 50/60Hz 频率，AEG Modicon AS-B806-032 可直接驱动各类交流执行元件。
- 采用 2 组公共端设计（16 点 / 公共端），AEG Modicon AS-B806-032 信号分配合理，布线更规整。
- 与 Modicon AS-B 系列控制器无缝兼容，AEG Modicon AS-B806-032 无需复杂配置即可稳定通信。
- 兼容 Modbus 工业协议，AEG Modicon AS-B806-032 快速接入自动化网络，数据传输可靠。
- 接线端子模块化设计，AEG Modicon AS-B806-032 插拔便捷，可提前预接线减少现场调试时间。
- 工作温度覆盖 0℃至 40℃，AEG Modicon AS-B806-032 适应常规工业车间环境，无需额外温控。
- 支持 80% 非冷凝湿度环境，AEG Modicon AS-B806-032 在潮湿工况下仍能稳定运行。
- 模块化独立结构，AEG Modicon AS-B806-032 故障时可单独更换，降低维护成本与停机时间。
- 配备电源、通信及通道状态指示灯，AEG Modicon AS-B806-032 故障定位直观，排查效率高。
- 端子具备防误插保护，AEG Modicon AS-B806-032 避免接线错误导致的设备损坏，新手也能操作。
AEG MODICON AS-B806-032输出模块 英文资料：
The AEG Modicon AS-B806-032 is a 32 channel industrial output module designed specifically for multi actuator drivers, with a simple and easy-to-use operating logic.
Adopting DIN standard horizontal rail installation, AEG Modicon AS-B806-032 snap on fixing does not require professional tools, with high assembly efficiency.
Supports 120VAC output voltage, compatible with 50/60Hz frequency, AEG Modicon AS-B806-032 can directly drive various AC actuators.
Adopting a 2-group common terminal design (16 points/common terminal), the AEG Modicon AS-B806-032 signal distribution is reasonable and the wiring is more organized.
Seamlessly compatible with Modicon AS-B series controllers, AEG Modicon AS-B806-032 can communicate stably without complex configuration.
Compatible with Modbus industrial protocol, AEG Modicon AS-B806-032 can quickly connect to automation networks with reliable data transmission.
Modular design of wiring terminals, AEG Modicon AS-B806-032 is easy to plug and unplug, and can be pre wired in advance to reduce on-site debugging time.
The working temperature ranges from 0 ℃ to 40 ℃, and AEG Modicon AS-B806-032 is suitable for conventional industrial workshop environments without the need for additional temperature control.
Supporting 80% non condensing humidity environment, AEG Modicon AS-B806-032 can still operate stably under humid conditions.
Modular independent structure, AEG Modicon AS-B806-032 can be replaced separately in case of failure, reducing maintenance costs and downtime.
Equipped with power, communication, and channel status indicator lights, AEG Modicon AS-B806-032 has intuitive fault location and high troubleshooting efficiency.
The terminal is equipped with anti misoperation protection, and the AEG Modicon AS-B806-032 avoids equipment damage caused by wiring errors. It can also be operated by beginners.
AEG MODICON AS-B806-032输出模块 产品展示
产品视频
3.其他产品
IC3600STKH1温度控制卡
IC3600LLEA1B电路板
PWB277A7127G1电路板
4.其他英文产品
EATON XV-440-10TVB-1-20 Operation display panel
PFSK151 3BSE018876R1 Control card
PM865K01 3BSE031151R1 Control processor
| K33HCHJ-LNK-NS-00 | AMAT 0100-90702 | IMASI23 |
| K32HSFL-LNK-NS-02 | AMAT 0100-3527 | 3500/91-01-02-00 |
| K32HRLM-LNK-NS-00 | AMAT 0100-09306 | 135489-01 |
| K32HRLG-LNK-NS-00 | AMAT 0100-00175 | 84933-02 |
| K32HRHK-LNK-NS-00 | AMAT 0100-01704 | IMFCS01 |
| K32HRHJ-LSS-NS-02 | AMAT 0100-90977 | IMFEC12 |
The content is from Ruichang Mingsheng Automation Equipment Co., LTD
Contact: +86 15270269218
