853-040482-525电源适配器 

1.产 品 资 料 介 绍：

853-040482-525 电源适配器使用注意事项

1. 适配器使用前需核对输入电压，确保与市电规格（AC 100-240V）匹配，严禁错接高压电源。
2. 安装时轻拿轻放，避免摔落、挤压，防止内部线路断裂或元器件松动。
3. 连接负载设备前，检查输出接口是否完好，插头针脚无变形、氧化现象。
4. 适配器与设备的连接插头需插紧，避免接触不良导致供电不稳或设备重启。
5. 确保适配器输出电压、电流与负载设备额定参数一致，禁止超功率使用。
6. 适配器工作时需保持通风散热，避免覆盖衣物、杂物，防止温度过高引发故障。
7. 放置环境需干燥通风，远离水源、潮湿区域，防止内部短路。
8. 电源线避免弯折、拉扯，远离尖锐物体，防止外皮破损漏电。
9. 严禁私自拆解适配器，内部高压电路可能造成触电危险。
10. 设备使用完毕后，建议先关闭负载电源，再拔下适配器插头。
11. 长期不使用时，及时断开适配器与市电的连接，减少待机损耗和元件老化。
12. 清洁适配器表面时，需先断电，用干燥软布擦拭，避免液体渗入内部。
13. 避免在强电磁干扰环境下使用，防止适配器工作异常影响设备运行。
14. 检查电源线与适配器主体的连接处，无松动、发烫现象，发现异常立即停用。
15. 更换电源线时，需选用同规格的认证线材，禁止使用劣质线缆。

853-040482-525电源适配器 英文资料：

Precautions for using 853-040482-525 power adapter

Before using the adapter, it is necessary to check the input voltage to ensure that it matches the specifications of the mains power supply (AC 100-240V), and it is strictly prohibited to connect the high voltage power supply incorrectly.

Handle with care during installation to avoid falling or squeezing, and prevent internal circuit breakage or loose components.

Before connecting the load device, check if the output interface is intact and if the plug pins are not deformed or oxidized.

The connection plug between the adapter and the device should be plugged tightly to avoid poor contact that may cause unstable power supply or device restart.

Ensure that the output voltage and current of the adapter are consistent with the rated parameters of the load device, and prohibit the use of excessive power.

When the adapter is working, it is necessary to maintain ventilation and heat dissipation, avoid covering clothes and debris, and prevent high temperatures from causing malfunctions.

The placement environment should be dry and ventilated, away from water sources and humid areas, to prevent internal short circuits.

Avoid bending or pulling the power cord, keep it away from sharp objects, and prevent the outer skin from being damaged and leaking electricity.

It is strictly prohibited to disassemble the adapter without authorization, as the internal high-voltage circuit may pose a risk of electric shock.

After using the device, it is recommended to turn off the load power first and then unplug the adapter plug.

When not in use for a long time, disconnect the adapter from the mains power in a timely manner to reduce standby losses and component aging.

When cleaning the surface of the adapter, power off first and wipe it with a dry soft cloth to prevent liquid from seeping into the interior.

Avoid using in strong electromagnetic interference environments to prevent abnormal adapter operation from affecting device operation.

Check the connection between the power cord and the adapter body for any looseness or overheating. If any abnormalities are found, stop using immediately.

When replacing the power cord, it is necessary to use certified cables of the same specification, and the use of inferior cables is prohibited.

Summary: The use of the 853-040482-525 power adapter requires special attention to voltage matching, connection reliability, and heat dissipation and ventilation. It is important to strictly avoid risk operations such as excessive power, humidity, and disassembly. Daily cable maintenance and idle power outages can effectively extend the service life and ensure safe and stable power supply.

853-040482-525电源适配器 产品展示

产品视频

3.其他产品

GE IS230TVBAH2A导轨模块
ABB PFEA112-20 3BSE030369R0020电子控制模块
PIONEER PM3398B-6P-1-3P-E电源模块

4.其他英文产品

IC698CPE040-JP combustion engine card
IMHSS03 Voltage dc module
YASKAWA JGSM-06 73051-00060 Logic input module

The content is from Ruichang Mingsheng Automation Equipment Co., LTD

Contact: +86 15270269218