C4410590NOUI电源模块

C4410590NOUI电源模块 

1.产 品 资 料 介 绍：

C4410590NOUI电源模块产品特点（10条）

C4410590NOUI是一款工业级高可靠性电源模块，专为自动化控制系统、PLC及远程I/O机架供电设计，适配化工、水处理、智能制造等严苛场景，核心特点如下：

1. 宽幅输入电压适配

支持85-264VAC宽范围交流输入，兼容50/60Hz工频，可适应全球不同地区电网标准及电压波动，无需额外适配即可稳定运行。

2. 稳定24VDC输出

标称输出24VDC稳定电压，输出电流可达3.3A以上，功率因数＞0.9，电压波动小，可为PLC、传感器、执行器等设备提供精准供电。

3. 多重安全保护机制

内置过载、短路、过压及过热保护功能，故障时自动切断输出，故障排除后可自动恢复，有效保护后端设备及模块自身安全。

4. 强化电气隔离设计

输入与输出、输出与背板之间采用电气隔离设计，隔离电压达2500VAC，有效抵御电磁干扰，避免电源故障传导至控制系统。

5. 支持热插拔维护

集成防倒灌二极管，支持安全模式下热插拔，可在系统不停机状态下更换模块，提升维护灵活性与系统可用性。

6. 工业级环境耐受

工作温度范围-10℃~+55℃，存储温度-40℃~+85℃，耐受95%湿度（无凝露），具备良好抗振动、防尘及抗电磁干扰能力。

7. 紧凑安装节省空间

采用模块化紧凑设计，适配35mm标准DIN导轨安装，体积小巧，可直接安装于PLC机架专用电源槽位，节省控制柜空间。

8. 直观状态监测指示

前面板配备电源正常、故障告警LED指示灯，直观反馈工作状态，便于操作人员快速识别故障，缩短排查时间。

9. 智能均流扩展

支持软件均流功能，无需硬件设置，最多可60个模块并联自主均流运行，轻松扩展输出容量，满足大功率供电需求。

10. 国际合规认证保障

通过CE、UL、CSA等国际认证，符合IEC61131-2标准及EMC电磁兼容要求，适配全球多行业工业自动化系统合规需求。

C4410590NOUI电源模块 英文资料：

C4410590NOUI power module product features (10)

C4410590NOUI is an industrial grade high reliability power module designed specifically for powering automation control systems, PLCs, and remote I/O racks. It is suitable for harsh scenarios such as chemical engineering, water treatment, and intelligent manufacturing. Its core features are as follows:

1. Wide input voltage adaptation

Supports 85-264VAC wide range AC input, compatible with 50/60Hz power frequency, can adapt to different global power grid standards and voltage fluctuations, and can operate stably without additional adaptation.

2. Stable 24VDC output

The nominal output is a stable voltage of 24VDC, with an output current of over 3.3A, a power factor greater than 0.9, and small voltage fluctuations. It can provide precise power supply for devices such as PLCs, sensors, and actuators.

3. Multiple security protection mechanisms

Built in overload, short circuit, overvoltage, and overheating protection functions automatically cut off the output in case of faults, and can be automatically restored after troubleshooting, effectively protecting the safety of backend equipment and modules themselves.

4. Strengthen electrical isolation design

Electrical isolation design is adopted between input and output, output and backplane, with an isolation voltage of up to 2500VAC, effectively resisting electromagnetic interference and avoiding power failures from being transmitted to the control system.

5. Support hot swappable maintenance

Integrated anti backflow diode, supports hot swapping in safe mode, and can ｒｅｐｌａｃｅ modules without shutting down the system, improving maintenance flexibility and system availability.

6. Industrial grade environmental tolerance

The working temperature range is -10 ℃~+55 ℃, the storage temperature is -40 ℃~+85 ℃, it can withstand 95% humidity (no condensation), and has good anti vibration, dustproof, and anti electromagnetic interference capabilities.

7. Compact installation saves space

Adopting a modular and compact design, it is compatible with 35mm standard DIN rail installation, with a small volume that can be directly installed in the dedicated power slot of the PLC rack, saving control cabinet space.

8. Intuitive state monitoring indication

The front panel is equipped with LED indicators for normal power supply and fault alarm, providing intuitive feedback on the working status, making it easy for operators to quickly identify faults and shorten troubleshooting time.

9. Intelligent current sharing expansion

Support software current sharing function, no hardware settings required, up to 60 modules can run independently with parallel current sharing, easily expanding output capacity to meet high-power power supply needs.

10. International compliance certification guarantee

Through international certifications such as CE, UL, CSA, etc., it meets the requirements of IEC61131-2 standard and EMC electromagnetic compatibility, and adapts to the compliance needs of industrial automation systems in multiple industries worldwide.

C4410590NOUI电源模块 产品展示

产品视频

3.其他产品

ABB YPP110A 3ASD573001A1电动机驱动器模块
ABB YPK112A 3ASD573001A13电动机驱动器
SCHNEIDER 140CPU67260PLC模块

4.其他英文产品

ABB PCD235B101 power supply module
Eaton XVS-440-10MPI-1-1AD touch screen
ENTERASYS A4H124-4FX network switch

The content is from Ruichang Mingsheng Automation Equipment Co., LTD

Contact: +86 15270269218