1.产 品 资 料 介 绍：
- 产品定位：Nexus 7000 系列 I/O 模块，M1 系列千兆电口板，提供高密度 1G 铜缆接入。
- 端口规格：48 个 10/100/1000Base-T 电口，RJ45 连接器，自适应速率。
- 背板带宽：单方向 46 Gbps，全双工 92 Gbps，分布式跨 fabric 模块。
- 软件要求：NX-OS 5.0 及以上版本，兼容 SUP1/SUP2/SUP2E 主控。
- 机箱适配：全 Nexus 7000 系列机箱（10 槽 / 18 槽等），需 Fabric-1/2 交换矩阵。
- 性能指标：MAC 表 128K，Jumbo Frame 9216 字节，IPv4 路由 100 万，IPv6 路由 35 万。
- 业务特性：支持 VLAN、QoS、ACL、链路聚合、VRRP/HSRP 等企业级功能。
- 物理尺寸：高 4.4 cm，宽 38.9 cm，深 55.6 cm，重量约 7.0 kg。
- 功耗特性：典型功耗约 358W，最大 400W，由机箱统一供电。
- 环境规格：工作温度 0–40°C（部分型号支持扩展温区），工业级电磁兼容。
- 安装方式：热插拔（OIR），占 1 个 I/O 模块槽位，导轨 / 机箱安装。
- 状态指示：模块状态（绿 / 橙 / 红）、端口链路（绿 / 橙 / 闪）、ID 蓝灯，便于运维排查。
- 管理接口：支持 CLI、XML、SNMP、Cisco DCNM 图形管理。
- 安全特性：支持 MAC 安全、802.1X 认证、AES 加密，符合 NEBS 等工业标准。
- 典型场景：数据中心服务器接入、企业核心 / 汇聚层千兆扩容、园区网高密度铜缆接入。
N7K-M148GT-11L端口交换机模块 英文资料：
N7K-M148GT-11L is a 48 port gigabit electrical port module of the Cisco Nexus 7000 series M1 series, supporting 10/100/1000Mbps adaptive, RJ45 interface, with XL expansion feature, used for core or data center switch expansion.
Product positioning: Nexus 7000 series I/O module, M1 series gigabit electrical interface board, providing high-density 1G copper cable access.
Port specifications: 48 10/100/1000Base-T electrical ports, RJ45 connectors, adaptive speed.
Backplane bandwidth: unidirectional 46 Gbps, full duplex 92 Gbps, distributed across fabric modules.
Software requirements: NX-OS 5.0 or above, compatible with SUP1/SUP2/SUP2E controllers.
Chassis adaptation: Full Nexus 7000 series chassis (10 slots/18 slots, etc.), requiring Fabric-1/2 switching matrix.
Performance indicators: MAC table 128K, Jumbo Frame 9216 bytes, IPv4 routing 1 million, IPv6 routing 350000.
Business features: Supports enterprise level functions such as VLAN, QoS, ACL, link aggregation, VRRP/HSRP, etc.
Physical dimensions: Height 4.4 cm, Width 38.9 cm, Depth 55.6 cm, Weight approximately 7.0 kg.
Power consumption characteristics: The typical power consumption is about 358W, with a maximum of 400W, and it is uniformly powered by the chassis.
Environmental specifications: Operating temperature range of 0-40 ° C (some models support extended temperature zones), industrial grade electromagnetic compatibility.
Installation method: Hot swappable (OIR), occupying one I/O module slot, rail/chassis installation.
Status indication: module status (green/orange/red), port link (green/orange/flashing), ID blue light, for easy operation and maintenance troubleshooting.
Management interface: Supports CLI, XML, SNMP, Cisco DCNM graphic management.
Security features: Supports MAC security, 802.1X authentication, AES encryption, and complies with industry standards such as NEBS.
Typical scenarios: data center server access, enterprise core/aggregation layer gigabit expansion, high-density copper cable access to campus network.
The N7K-M148GT-11L, with its high density, high throughput, and comprehensive enterprise level features, is the core module for expanding gigabit ports on the Nexus 7000 platform, suitable for network scenarios that require high reliability and scalability.
产品视频
3.其他产品
Kollmorgen S72402-NANANA-NA-225控制器
GE IC697CPX928-FECPU模块
SEW DFS56L-TF-RH1M-KK伺服电机
4.其他英文产品
CMA198 Input/Output Module
BENTLY 3500/25-01-01-00 Motion Controller Module
B&W SQ-300I 8700700-006 microcontroller
| 073-404555-00 | 03-10639-00 | 19-00130-00 |
| 073-404423-00 |  02-00152-00 | 03-056746-00 |
| 073-404337-00 | 193X802AAG01 | 6DD1684-0FD0 |
| 073-404227-00 | 6DD1684-0DB2 | 6DD1684-0GH0 |
| 073-404145-00 | 531X304IBDASG1 | 6SC6100-0AB80 |
| 0644536-000 | 531X304IBDARG1 | 6DD1684-0GF0 |
The content is from Ruichang Mingsheng Automation Equipment Co., LTD
Contact: +86 15270269218
