1.产 品 资 料 介 绍：
- 定位工业通用型接口输出单元，主打多协议转换与信号输出功能。
- 支持 RS-232/RS-485 / 以太网三类接口，兼容主流工业组网需求。
- 适配 Modbus RTU/TCP、Profibus、CANopen 等常用工业通信协议。
- 工作电压为 24 V DC（±20%），符合工业控制通用供电标准。
- 通信速率最高 115.2 kbps（RS-485）；以太网达 10/100 Mbps，传输高效。
- 内置≥2500 V 光电隔离，有效抑制电磁干扰，保障信号稳定。
- 具备≥2 kB 数据缓存，应对突发数据传输，减少丢包风险。
- 支持有源 / 无源两种输出模式，可驱动继电器、接触器等执行元件。
- 配备 LED 状态指示，清晰显示电源、发送、接收及故障状态。
- 工业级元器件选型，抗振动、抗冲击，适应恶劣现场环境。
- 工作温度范围 - 40℃～+85℃，宽温设计适配极端工况。
- 采用 35 mm DIN 导轨或面板螺丝固定，安装便捷、维护简单。
- 插拔式螺钉端子设计，线径适配 0.2–2.5 mm²，接线灵活。
- 尺寸约 90 mm×70 mm×25 mm，重量≈120 g，节省柜内空间。
- 可与 ABB、Siemens、Schneider 等主流 PLC 无缝兼容，通用性强。
INTERFACE AZI-2502 is a universal interface output module designed by the INTERFACE brand specifically for industrial automation. It serves as a signal bridge between field devices and PLC/DCS systems, enabling data conversion, protocol adaptation, and output driving. It is widely used in scenarios such as power, chemical, and mechanical manufacturing.
Positioned as an industrial universal interface output unit, it focuses on multi protocol conversion and signal output functions.
Supports three types of interfaces: RS-232/RS-485/Ethernet, compatible with mainstream industrial networking requirements.
Adapt to commonly used industrial communication protocols such as Modbus RTU/TCP, Profibus, CANopen, etc.
The working voltage is 24 V DC (± 20%), which meets the general power supply standards for industrial control.
The maximum communication speed is 115.2 kbps (RS-485); Ethernet can reach 10/100 Mbps, with efficient transmission.
Built in ≥ 2500 V photoelectric isolation effectively suppresses electromagnetic interference and ensures signal stability.
Equipped with a data cache of ≥ 2 kB, it can handle sudden data transmission and reduce the risk of packet loss.
Supports both active and passive output modes, capable of driving actuators such as relays and contactors.
Equipped with LED status indicators, it clearly displays power, transmission, reception, and fault status.
Industrial grade component selection, resistant to vibration and impact, suitable for harsh on-site environments.
The working temperature range is -40 ℃ to+85 ℃, and the wide temperature design is suitable for extreme working conditions.
Fixed with 35mm DIN rails or panel screws, easy to install and maintain.
Plug in screw terminal design, with a wire diameter suitable for 0.2-2.5 mm ², and flexible wiring.
The size is approximately 90 mm x 70 mm x 25 mm, with a weight of ≈ 120 g, saving space inside the cabinet.
It is seamlessly compatible with mainstream PLCs such as ABB, Siemens, Schneider, and has strong versatility.
This module has the core advantages of high anti-interference, multi protocol compatibility, and easy installation. It is a commonly used accessory for upgrading old equipment and expanding new systems. Currently, it is mainly available in second-hand, refurbished, and new sources, which can meet the signal output and communication expansion needs of industrial sites.
产品视频
3.其他产品
KOKUSAI BALEXT-SMP数字量输入模块
ABB KUC720AE01 3BHB003431R0001 3BHB000652R0001驱动板卡
EMERSON A3120022-000CPU模块
4.其他英文产品
TC514V2 3BSE013281R1 Redundant System Control Module
0100-71229 Tension measurement module
SCHMERSAL AZM160-22YP motion controller
| PMB31D-00116-02 | NMFC04 | N32HRLJ-LNK-NS-00 |
| PMB31D-00116-01 | 07KT60R101 | PFCL201 50.0KN |
| PMB31D-00116-00 | PHCBRCPBA10000 | 3BSE004253R1 SX540 |
| PMB31D-00114-03 | AMAT 0130-20335 | M22NRXB-LNN-NS-02 |
| PMB31D-00114-02 | 07BV60R1 | 57160001-LF DSTD 133 |
| PMB31D-00114-01 | 70 AS 06a-E | PWM3636-5486-7 |
| PMB31D-00114-00 | 70 FV 01a-E | 57160001-FH DSTD 170 |
The content is from Ruichang Mingsheng Automation Equipment Co., LTD
Contact: +86 15270269218
