1.产 品 资 料 介 绍：
ADAS STB568 总线板卡
ADAS STB568 是工业自动化系统多路信号采集传输总线板卡，负责现场模拟、开关量信号采集并通过总线上传主控系统。
多通道集成设计，可同步采集多路工业现场传感信号
搭载光电隔离电路，有效屏蔽强电磁干扰，避免信号失真
采用专用工业总线通讯，数据传输稳定，实时性强
内置过压、过流、反接保护，防止接线失误损坏板卡
配备通道状态指示灯，可快速定位故障采集点位
标准插卡式结构，机柜拆装、更换检修操作便捷
工业宽电压供电，电网电压波动环境下稳定运行
宽温工业设计，高低温、粉尘潮湿工况可长期工作
镀金金手指接口，耐磨抗氧化，电气连接持久可靠
上电自动硬件自检，实时检测通道与总线通讯状态
阻燃多层线路基板，绝缘性好，降低线路短路隐患
内置信号滤波电路，过滤杂波干扰，提升采集数据精度
支持多块板卡总线级联，灵活拓展系统信号采集点位
原厂精密贴片工艺，抗震抗冲击，设备运行故障率低
适配 ADAS 同系列工控系统，参数调试简单，兼容性优异
ADAS STB568 总线板卡采集精度高、抗干扰能力强，多用于印刷、冶金、化工自动化生产线，是工控系统常用信号采集备件。
ADAS STB568 总线板卡 产品英文
ADAS STB568 bus board
ADAS STB568 is a multi-channel signal acquisition and transmission bus board for industrial automation systems, responsible for on-site simulation, switch signal acquisition, and uploading to the main control system through the bus.
Multi channel integrated design, capable of synchronously collecting multiple industrial field sensing signals
Equipped with optoelectronic isolation circuit, effectively shielding strong electromagnetic interference and avoiding signal distortion
Adopting dedicated industrial bus communication, stable data transmission, and strong real-time performance
Built in overvoltage, overcurrent, and reverse protection to prevent wiring errors from damaging the board
Equipped with channel status indicator lights, it can quickly locate the fault collection point
Standard plug-in card structure, convenient for cabinet disassembly, replacement, and maintenance operations
Industrial wide voltage power supply, stable operation under fluctuating grid voltage environment
Wide temperature industrial design, capable of long-term operation under high and low temperature, dust and humidity conditions
Gold plated finger interface, wear-resistant and anti-oxidation, durable and reliable electrical connection
Power on automatic hardware self-test, real-time detection of channel and bus communication status
Flame retardant multi-layer circuit board, good insulation, reduces the risk of short circuit in the circuit
Built in signal filtering circuit, filters out clutter interference and improves data acquisition accuracy
Support cascading of multiple board buses and flexible expansion of system signal acquisition points
Original precision SMT technology, earthquake and impact resistance, low equipment failure rate during operation
Compatible with ADAS industrial control systems of the same series, with simple parameter debugging and excellent compatibility
The ADAS STB568 bus board has high acquisition accuracy and strong anti-interference ability, and is commonly used in printing, metallurgy, and chemical automation production lines. It is a commonly used signal acquisition spare part for industrial control systems.
ADAS STB568 总线板卡 产品展示
视频展示
中文产品
SR469-P5-HI-A20-E 数字继电器保护装置
MOOG D138-002-02电液伺服控制器
MOOG D136-001-001电液伺服控制器模块
Bently 3500/92 136188-02 Ethernet Input/Output Module
PROSOFT MVI56-MCM interface module
HONEYWELL TC-FPCXX2 AC Power Supply Module
| S32HMAA-HNNM-03 | SC453-016-02 | SC904AN-046-01 |
| S32GNNA-RNNM-00 | SC453-004-15 | SCE906-001-01 |
| S32GNNA-RNNE-00 | SC453-804-05 | SCE904-001-01 |
| S32GNNA-HGNM-00 | SC452-815-05 | SC9020010104G108 |
| S32GNAA-RNVE-00 | SC453-040-08 | SC900-001-01 |
| S32GMNA-RNNM-00 | SC722A-001-PM72008 | SCE905-001-00 |
The content is from Ruichang Mingsheng Automation Equipment Co., LTD
Contact: +86 15270269218
