1.产 品 资 料 介 绍：
ADAS STB420 总线通讯板卡
ADAS STB420 是工业自动化系统专用总线通讯板卡，负责主控设备和现场采集模块的数据交互传输。
采用专用工业总线协议，设备之间数据传输实时稳定
内置光电隔离设计，有效抵御现场电磁干扰
集成过压、过流保护功能，防止接线错误损坏板卡
搭载工作状态指示灯，便于快速排查通讯故障
标准插卡式结构，机柜拆装、更换检修操作简单
支持宽范围工业电压输入，电网波动下运行平稳
工业宽温设计，高低温、潮湿粉尘环境可长期使用
镀金金手指接口，耐磨抗氧化，电气接触性能稳定
上电自动硬件自检，可及时识别线路与通讯异常
使用阻燃线路板材，绝缘性好，降低短路故障风险
自带信号滤波电路，减少干扰造成的数据传输错误
支持多块板卡级联安装，灵活扩展系统通讯点位
原厂贴片焊接工艺，抗震抗冲击，运行故障率较低
数据吞吐能力强，可满足多通道同步数据交互需求
适配 ADAS 同系列控制系统，安装调试便捷兼容性高
ADAS STB420 总线通讯板卡防护可靠、通讯高效，多用于印刷、冶金、化工自动化生产线，是工控系统组网常用核心备件。
ADAS STB420 总线通讯板卡 产品英文
ADAS STB420 bus communication board
ADAS STB420 is a dedicated bus communication board for industrial automation systems, responsible for data exchange and transmission between the main control equipment and on-site acquisition modules.
Adopting a dedicated industrial bus protocol, real-time and stable data transmission between devices
Built in photoelectric isolation design, effectively resisting on-site electromagnetic interference
Integrated overvoltage and overcurrent protection functions to prevent wiring errors from damaging the board
Equipped with a working status indicator light for quick troubleshooting of communication faults
Standard plug-in card structure, easy to disassemble, ｒｅｐｌａｃｅ and maintain the cabinet
Support wide range industrial voltage input, smooth operation under grid fluctuations
Industrial wide temperature design, suitable for long-term use in high and low temperature, humid and dusty environments
Gold plated finger interface, wear-resistant and anti-oxidation, stable electrical contact performance
Automatic hardware self-test upon power on, capable of promptly identifying circuit and communication abnormalities
Using flame-retardant circuit boards with good insulation to reduce the risk of short circuit faults
Equipped with signal filtering circuit to reduce data transmission errors caused by interference
Support cascading installation of multiple boards and flexible expansion of system communication points
Original factory surface mount welding process, earthquake and impact resistance, low operational failure rate
Strong data throughput capability, able to meet the needs of multi-channel synchronous data interaction
Compatible with ADAS control systems of the same series, easy to install and debug, high compatibility
ADAS STB420 bus communication board has reliable protection and efficient communication, and is widely used in printing, metallurgy, and chemical automation production lines. It is a commonly used core spare part for industrial control system networking.
ADAS STB420 总线通讯板卡 产品展示
视频展示
中文产品
MOOG D136-001-001电液伺服控制器模块
GE IC698RMX016 VMIVME-5567-100数字输入输出模块
PFSA140 3BSE003816R1数字输入输出模块
DO880 3BSE028602R1 Digital Output Module
AADVANCE T9110 processor module
Woodward 8290-191 Speed Controller
| RSER200-4 | SC723B001-01 | SCE903A3-002-01 |
| RMV-142D | SC726A-001-PM72013 | SCE903AN-002-01 |
| RMV-132D | SC723A-001-PM72008 | SN31HCYR-LNK-NS-01 |
| RMV-122D | SC102-001 | S34GNNA-HGNE-00 |
| RMV-112D | SC101-001-M | S22GNNA-RNNS-02 |
| RMQ-121D | SC105-001-T2 | S21HNAA-RNNE-00 |
The content is from Ruichang Mingsheng Automation Equipment Co., LTD
Contact: +86 15270269218
