邮箱:stodcdcs@gmail.com

手机/微信/WhatsApp

+86 15270269218

stodcdcs@gmail.com

NTI VOPEX-13W3-4 端口视频分配器

发布时间:2026-07-29人气:
  • NTI VOPEX-13W3-4 端口视频分配器
  • NTI VOPEX-13W3-4 端口视频分配器
  • NTI VOPEX-13W3-4 端口视频分配器

NTI VOPEX-13W3-4 端口视频分配器 

1.产 品 资 料 介 绍:

NTI VOPEX-13W3-4 端口视频分配器
1、单路 13W3 视频输入,同步分出四路同源视频信号
2、VOPEX-13W3-4 输出端口独立缓冲,杜绝信号互相干扰
3、支持 SUN/SGI 工作站 13W3 专用视频接口,适配半导体设备
4、带宽充足,高分辨率画面传输无衰减、图像清晰
5、搭载锁扣式 13W3 接口,线缆连接稳固不易松动脱落
6、VOPEX-13W3-4 支持同步信号传输,兼容多种工作站时序
7、可多级级联拓展,实现更多显示器同步输出画面
8、即插即用无需软件配置,上电即可投入使用
9、金属外壳结构,抗电磁干扰,适配工业机房环境
10、低信号损耗,搭配专用线缆可延长视频传输距离
11、支持显示器 ID 信号直通,保障设备正常识别显示屏
12、VOPEX-13W3-4 运行功耗低,长时间连续工作发热量小
13、整机抗震稳定性强,适合光刻设备配套工况使用
14、标准化机身,支持机架安装,便于现场布局布线
15、原厂电气标准,同型号备件可直接替换维修
NTI VOPEX-13W3-4 端口视频分配器为 13W3 接口专用视频分路设备,多用于半导体光刻工作站多路画面同步输出,设备运行稳定可靠。

NTI VOPEX-13W3-4 端口视频分配器   产品英文介绍

NTI VOPEX-13W3-4 Port Video Distributor

1. Single channel 13W3 video input, synchronously split into four same source video signals

2. VOPEX-13W3-4 output port independent buffering to prevent signal interference with each other

3. Support SUN/SGI workstation 13W3 dedicated video interface, compatible with semiconductor equipment

4. Adequate bandwidth, no attenuation in high-resolution image transmission, and clear image quality

5. Equipped with a locking 13W3 interface, the cable connection is stable and not easy to loosen or fall off

6. VOPEX-13W3-4 supports synchronous signal transmission and is compatible with multiple workstation timing sequences

7. Can be cascaded and expanded at multiple levels to achieve synchronous output of more displays

8. Plug and play without software configuration, can be put into use immediately after power on

9. Metal shell structure, resistant to electromagnetic interference, suitable for industrial computer room environment

10. Low signal loss, paired with dedicated cables to extend video transmission distance

11. Support direct transmission of monitor ID signal to ensure normal recognition of the display screen by the device

12. VOPEX-13W3-4 has low operating power consumption and low heat generation during long-term continuous operation

13. The whole machine has strong seismic stability and is suitable for use in conjunction with lithography equipment

14. Standardized body, supporting rack installation, convenient for on-site layout and wiring

15. Original factory electrical standards, spare parts of the same model can be directly replaced and repaired

The NTI VOPEX-13W3-4 port video distributor is a dedicated video splitter device for the 13W3 interface, commonly used for synchronous output of multiple images in semiconductor lithography workstations. The device operates stably and reliably.

NTI VOPEX-13W3-4 端口视频分配器   产品展示

VOPEX-13W3-4 (1).jpg

视频展示


中文产品

Siemens 6ES7132-1BH00-0XB0 数字量输出模块
PROSOFT 6K8-1037302 通讯接口
GE 44A751101-G01 单板计算机模块 

英文产品

METSO PDP401 logical unit module
METSO PDP403 logical unit module
METSO PDP601 output unit module

AMAT 0190-40351AMAT 0190-B4280AMAT 0190-12164
AMAT 0190-26495AMAT 0190-DD115AMAT 0190-12263
AMAT 0190-38517AMAT 0190-35685AMAT 0190-12265
AMAT 0190-16171AMAT 0190-35686AMAT 0190-12342
AMAT 0190-35402AMAT 0190-35689AMAT 0190-12464

The content is from Ruichang Mingsheng Automation Equipment Co., LTD

Contact: +86 15270269218 

推荐资讯

+86 15270269218