IMDS014模拟输出模块

IMDS014模拟输出模块 

1.产 品 资 料 介 绍：

IMDS014数字输出模块产品特点（15条）

1. 搭载集电极开路输出设计，配备16路独立数字输出通道，满足多设备同时控制需求。

2. 支持24VDC 250mA、48VDC 125mA双规格负载切换，适配不同现场设备功率需求。

3. 采用光电耦合隔离技术，通道间隔离电压达1.5kV，有效阻断地环路电磁干扰。

4. 单通道最大负载电流可达370mA，触点额定电流4A，负载能力强劲适配工业场景。

5. 响应速度快捷，触点动作响应时间＜10ms，可应对高速切换控制需求。

6. 宽温工作范围覆盖-40℃至70℃，耐受严苛工业环境温差变化。

7. 防护等级达IP65（NEMA 4X），具备防尘、防潮性能，适应恶劣现场工况。

8. 支持DIN导轨或面板两种安装方式，标准化尺寸设计，安装便捷且节省空间。

9. 内置状态指示LED，分模块运行状态（红绿双色）与通道输出状态（16路独立），可视化运维。

10. 兼容ABB Symphony DCS系统，可无缝对接主流工业自动化控制平台。

11. 采用高品质元器件与无风扇设计，结构坚固，长期运行可靠性高，故障率低。

12. 支持热插拔功能，可在系统不停机状态下更换模块，保障产线连续运行。

13. 具备短路保护与过载检测功能，自动规避异常负载对模块及设备的损坏。

14. 支持Profibus、EtherCAT等工业总线协议，实现远程控制与数据交互。

15. 单印刷电路板设计，仅占用系统一个安装槽位，空间利用率高，便于系统扩展。

IMDS014模拟输出模块  英文资料：

IMDS014 Digital Output Module Product Features (15)

1. Equipped with an open collector output design and 16 independent digital output channels, it meets the simultaneous control requirements of multiple devices.

2. Supports dual specification load switching of 24VDC 250mA and 48VDC 125mA, adapting to different power requirements of on-site devices.

3. Adopting optoelectronic coupling isolation technology, the isolation voltage between channels reaches 1.5kV, effectively blocking electromagnetic interference in the ground loop.

4. The maximum load current of a single channel can reach 370mA, with a rated contact current of 4A, and strong load capacity suitable for industrial scenarios.

5. Fast response speed, contact action response time<10ms, can meet high-speed switching control requirements.

6. The wide temperature working range covers -40 ℃ to 70 ℃, and can withstand harsh industrial environment temperature differences.

7. The protection level reaches IP65 (NEMA 4X), with dust-proof and moisture-proof performance, suitable for harsh on-site conditions.

8. Supports both DIN rail and panel installation methods, standardized size design, easy installation and space saving.

9. Built in status indicator LED, divided into module operation status (red and green dual color) and channel output status (16 independent channels), visual operation and maintenance.

10. Compatible with ABB Symphony DCS system and seamlessly integrated with mainstream industrial automation control platforms.

11. Adopting high-quality components and fanless design, the structure is sturdy, with high long-term reliability and low failure rate.

12. Supports hot swapping function, allowing for module replacement without system shutdown, ensuring continuous operation of the production line.

13. Equipped with short-circuit protection and overload detection functions, automatically avoiding damage to modules and equipment caused by abnormal loads.

14. Support industrial bus protocols such as Profibus and EtherCAT to achieve remote control and data exchange.

15. Single printed circuit board design, occupying only one installation slot in the system, with high space utilization and easy system expansion.

IMDS014模拟输出模块  产品展示

产品视频

3.其他产品

MOTOROLA VME172PA-652SE嵌入式控制器
ABB 5SHX 0660F0002智能模块
ABB 3BHL000390P0104 5SHX1960L0004IGCT模块板

4.其他英文产品

B&R 3IF661.9 Communication Module
FIREYE 95UVS2-1 flame detection probe
PACIFIC SCIENTIFIC SC753A-001-01 servo driver

The content is from Ruichang Mingsheng Automation Equipment Co., LTD

Contact: +86 15270269218