Siemens 505-6108B通道模拟输入模块  

1.产 品 资 料 介 绍：

Siemens 505-6108B 8 通道模拟输入模块

1. 属于西门子 SIMATIC 505 系列 PLC，8 通道单端模拟量输入模块，型号 505-6108B。
2. 支持信号：±5V（默认）、±10V（跳线设置）、0–20mA 电流，各通道通用兼容。
3. 分辨率为13 位 + 符号位，±5V 下分辨率 0.625mV，0–20mA 下分辨率 2.5μA。
4. 采用逐次逼近 SAR 转换，全通道转换速度快，最大 25ms，采集稳定高效。
5. 电流输入内置 250Ω 高精度电阻，直接接 0–20mA 变送器，无需外接电阻。
6. 具备过压、过流、内部钳位保护，由背板供电，不需要额外外部电源。
7. 每通道占 1 个字地址，8 通道共占用 8 个 WX 字地址，编程简单直观。
8. 对比 505-6108A，B 版本精度更高、速度更快、性能全面提升。
9. 推荐使用屏蔽双绞线布线，模拟线与动力线分离，降低干扰提升精度。
10. 广泛应用于压力、流量、液位、温度、位移等工业模拟信号采集场景。

Siemens 505-6108B通道模拟输入模块  产品英文

Siemens 505-6108B 8-channel analog input module

Belonging to Siemens SIMATIC 505 series PLC, 8-channel single ended analog input module, model 505-6108B.

Support signals: ± 5V (default), ± 10V (jumper setting), 0-20mA current, compatible with all channels.

The resolution is 13 bits+sign bit, with a resolution of 0.625mV at ± 5V and a resolution of 2.5 μ A from 0-20mA.

Adopting successive approximation SAR conversion, the full channel conversion speed is fast, with a maximum of 25ms, and the acquisition is stable and efficient.

The current input has a built-in 250 Ω high-precision resistor, which can be directly connected to a 0-20mA transmitter without the need for an external resistor.

Equipped with overvoltage, overcurrent, and internal clamp protection, powered by the backplane, no additional external power supply is required.

Each channel occupies 1 word address, and 8 channels occupy a total of 8 WX word addresses, making programming simple and intuitive.

Compared to 505-6108A, version B has higher accuracy, faster speed, and overall improved performance.

It is recommended to use shielded twisted pair cables for wiring, separating analog and power lines to reduce interference and improve accuracy.

Widely used in industrial analog signal acquisition scenarios such as pressure, flow rate, liquid level, temperature, displacement, etc.

In summary, Siemens 505-6108B is an 8-channel analog input module with high precision, speed, and reliability, which is particularly suitable for the maintenance, renovation, and replacement of old SIMATIC 505 control systems. It is a stable and reliable analog acquisition solution for industrial sites.

Siemens 505-6108B通道模拟输入模块   产品展示

产品视频

3.其他产品

ICS TRIPLEX 9832-3模块
ICS TRIPLEX 9852-2-9832-1输入输出模块
HIMA BV7032-0,5 数据连接电缆

4.其他英文产品

METSO D201134 Input output module
METSO D201376 Analog Input Module
IS220PDIAH1BE 336A5026ADP4 Industrial Communication Module

The content is from Ruichang Mingsheng Automation Equipment Co., LTD

Contact: +86 15270269218