INICTO3A电脑传输模块

INICTO3A电脑传输模块 

1.产 品 资 料 介 绍：

INICTO3A电脑传输模块产品特点（15条）

1. 集成2路RS-232-C串口+1路SCSI接口，实现高速电脑数据传输与设备联动。

2. 兼容Modbus RTU/TCP、Profibus-DP及ABB INFI 90原生协议，跨系统适配性强。

3. 支持64路I/O信号传输，可扩展至128路，采样频率达100kHz，瞬态信号捕捉精准。

4. 双通道硬件冗余设计，故障切换时间＜10ms，保障数据传输不中断。

5. +5VDC供电（典型功耗2.5W），支持±10%宽电压波动，适配复杂供电环境。

6. 0℃至60℃工作温域，耐受5%-95%无凝露湿度，防护等级达IP20。

7. 支持热插拔功能，模块更换无需停机，大幅缩短现场维护时间。

8. 工艺侧采用插孔板连接，接线牢固抗振动，减少接触不良导致的传输故障。

9. 适配ABB贝利INFI 90系统，可直接对接PLC/DCS，无需额外转换组件。

10. 内置数据校验机制，有效规避传输过程中的数据丢失与误码问题。

11. 支持远程固件升级，通过SCSI或以太网接口操作，无需拆卸模块。

12. 兼容第三方设备，可无缝对接西门子、施耐德等品牌工控系统。

13. 模块化紧凑设计，标准化安装，节省控制柜内空间，便于系统扩容。

14. 具备完善自诊断功能，故障状态实时反馈，运维排查高效便捷。

15. 通过CE、UL、cUL认证，广泛适用于冶金、化工、电厂等工业场景。

INICTO3A电脑传输模块 英文资料：

INICTO3A Computer Transmission Module Product Features (15)

1. Integrate 2 RS-232-C serial ports and 1 SCSI interface to achieve high-speed computer data transmission and device linkage.

2. Compatible with Modbus RTU/TCP, Profibus DP, and ABB INFI 90 native protocols, with strong cross system adaptability.

3. Supports 64 I/O signal transmission, expandable to 128 channels, with a sampling frequency of up to 100kHz, and precise transient signal capture.

4. Dual channel hardware redundancy design, with a fault switching time of less than 10ms, ensuring uninterrupted data transmission.

5.+5VDC power supply (typical power consumption of 2.5W), supporting ± 10% wide voltage fluctuations, suitable for complex power supply environments.

Working temperature range from 0 ℃ to 60 ℃, able to withstand 5% -95% non condensing humidity, with a protection level of IP20.

7. Support hot swapping function, module replacement does not require downtime, greatly reducing on-site maintenance time.

8. The process side adopts socket board connection, which is firmly wired and anti vibration, reducing transmission failures caused by poor contact.

9. Compatible with ABB Beli INFI 90 system, can directly interface with PLC/DCS without the need for additional conversion components.

10. Built in data verification mechanism effectively avoids data loss and error problems during transmission.

11. Support remote firmware upgrade, operated through SCSI or Ethernet interface, without the need to disassemble modules.

12. Compatible with third-party devices and can seamlessly integrate with industrial control systems from brands such as Siemens and Schneider.

13. Modular compact design, standardized installation, saves space inside the control cabinet, and facilitates system expansion.

14. Equipped with comprehensive self diagnosis function, real-time feedback of fault status, and efficient and convenient operation and maintenance troubleshooting.

15. Through CE, UL, and cUL certification, it is widely used in industrial scenarios such as metallurgy, chemical industry, and power plants.

INICTO3A电脑传输模块  产品展示

产品视频

3.其他产品

GE 8502-BI-DP总线接口模块
EMERSON 1X00781H01L电源模块
ABB BRC3000A控制器模块

4.其他英文产品

RDCU-12C PLC controller
WOODWARD 5501-365 electro-hydraulic converter
1C31189G01 Speed detector module

The content is from Ruichang Mingsheng Automation Equipment Co., LTD

Contact: +86 15270269218