AMAT Applied Materials 0010-30708分析电源组件
1.产 品 资 料 介 绍：
- 分析设备供电：为刻蚀后晶圆成分分析的质谱仪提供低纹波电源，保障检测数据精度。
- 检测模块赋能：为光谱仪光源驱动电路、信号放大模块供电，稳定设备运行状态。
- 安全供电管控：当分析模块短路时，快速切断输出，避免损坏精密分析元件。
- 安装：固定于分析设备电控单元，电源线采用屏蔽线缆，接地电阻≤0.5Ω。
- 维护：每 3 个月清洁散热孔，每 6 个月校准输出精度，故障优先排查输出端接线虚接 / 短路。
- 采购：优先选原厂供应商（如长欣自动化），到货验证输出精度报告与序列号溯源。
AMAT Applied Materials 0010-30708分析电源组件 英文资料：
1、 Core positioning
AMAT 0010-30708 is the "high-precision power supply core" of semiconductor analysis and detection equipment, designed to provide stable DC power for analysis modules such as mass spectrometers and spectrometers. It also has real-time voltage/current monitoring and overvoltage/overcurrent protection functions, and is suitable for Class 10 clean environments and low ripple power supply requirements of analysis equipment.
2、 Key parameters
Category
Specifications
Output characteristics
3 independent outputs (5V/12V/24V DC), total power ≤ 100W
Accuracy level
Output voltage ± 0.1% FS, ripple ≤ 10mVpp
Protection function
Overvoltage protection (1.1 times rated voltage), overcurrent protection (1.2 times rated current)
Environmental adaptation
0-55 ℃ IP40、 Anti electromagnetic interference (EN 61000-6-2)
Compatibility
Compatible with AMAT 0190-09445 detector and analysis equipment main control module
3、 Core applications
Power supply for analysis equipment: Provide low ripple power supply for mass spectrometer for analyzing the composition of etched wafers, ensuring the accuracy of detection data.
Empowering the detection module: supplying power to the spectrometer light source drive circuit and signal amplification module to stabilize the equipment operation status.
Safe power supply control: When the analysis module is short circuited, quickly cut off the output to avoid damaging the precision analysis components.
4、 Key points of operation and maintenance
Installation: Fixed to the electronic control unit of the analysis equipment, the power cord adopts shielded cable, and the grounding resistance is ≤ 0.5 Ω.
Maintenance: Clean the heat dissipation holes every 3 months, calibrate the output accuracy every 6 months, and prioritize troubleshooting for loose connections/short circuits in the output terminal wiring.
Procurement: Prioritize the selection of original suppliers (such as Changxin Automation), and verify the accuracy report and serial number traceability upon arrival.
5、 Technical value
High precision and low ripple output ensure the accuracy of analysis data, multiple protections reduce equipment failures, compatible with multiple analysis modules, and reduce the complexity of system power supply solutions.
AMAT Applied Materials 0010-30708分析电源组件 产品展示
产品视频
3.其他产品
Zygo 1115-801-346 激光头电缆
INDRAMAT TVM2.4-050-220/300-W1 电源模块
BENTLY 3500/92 133323-01 继电器模块
4.其他英文产品
METSO PDP403 logical unit module
METSO PDP601 output unit module
469-P5-HI-A20-E-H Relay module
| 6ES5701-0LA11 | CACR-10-101010F | OP1W03-0-0 |
| 6ES5700-8MA11 | CACR-SR05SB1AFY187 | OP945G |
| 6ES5700-2LA22 | CACR-SR15BC1FS | Asyst 4269-02-16000011 |
| 6ES5696-3AA21 | CACR-IR15SE | Asyst 3200-4310-02 |
| 6ES5581-5LA11 | CACR-CSL15AAAY30 | Asyst 3200-1071-02 6018-1002-10B |
| 6ES5581-1EE15 | CACR-SR30SF1BSB-Y1 | ASYST 3000-1086-04A |
The content is from Ruichang Mingsheng Automation Equipment Co., LTD
Contact: +86 15270269218
