KJ3001X1-BH1端子模块

KJ3001X1-BH1端子模块

1.产 品 资 料 介 绍：

1. 属于 DeltaV 标准 I/O 系列，为8 通道 120/230VAC 隔离型 DO 端子模块。
2. 适配 KJ3001X1‑BH1 DO 功能卡，实现系统侧与现场侧完全电气隔离。
3. 每通道支持120VAC 或 230VAC交流负载驱动，兼容现场电磁阀、接触器、指示灯等。
4. 采用光电隔离设计，隔离电压高，有效保护控制系统免受现场干扰与浪涌冲击。
5. 内置通道状态 LED 指示，直观显示每路输出通断，便于现场调试与故障排查。
6. 支持旋转键位锁定机制，确保与对应 DO 卡匹配，避免错插误用。
7. 采用标准 35mm DIN 导轨安装，结构紧凑，适配 DeltaV 标准机柜布局。
8. 接线端子采用弹簧式 / 螺钉式设计，接线牢固可靠，支持多线并接。
9. 具备过流 / 过压保护电路，提升模块与现场设备运行安全性。
10. 工作温度范围0–60°C，适应工业控制室稳定运行环境。
11. 防护等级IP20，仅用于机柜内安装，防尘防误触。
12. 具备CE、ATEX 防爆认证，可用于危险 2 区场合。
13. 模块 ID：12P0558X152，兼容 DeltaV 系统组态与诊断管理。
14. 支持EDD 电子设备描述，实现远程状态监控与故障诊断。
15. 主要用于ESD 紧急停车、阀门控制、电机启停、报警输出等安全联锁回路。

KJ3001X1-BH1端子模块 英文资料：

KJ3001X1-BH1 is an 8-channel 120/230VAC isolated digital output (DO) terminal module designed specifically for Emerson DeltaV systems. It is designed for high-voltage field load driving, providing electrical isolation and safe wiring, and is suitable for high-risk industrial scenarios such as chemical, power, and oil and gas industries.

Belonging to the DeltaV standard I/O series, it is an 8-channel 120/230VAC isolated DO terminal module.

Adapt to KJ3001X1-BH1 DO function card to achieve complete electrical isolation between the system side and the field side.

Each channel supports 120VAC or 230VAC AC load drive, compatible with on-site solenoid valves, contactors, indicator lights, etc.

Adopting optoelectronic isolation design, the isolation voltage is high, effectively protecting the control system from on-site interference and surge impact.

Built in channel status LED indicator, visually displaying the on/off status of each output, facilitating on-site debugging and troubleshooting.

Support rotation key locking mechanism to ensure matching with the corresponding DO card and avoid accidental insertion and misuse.

Adopting standard 35mm DIN rail installation, the structure is compact and compatible with DeltaV standard cabinet layout.

The terminal block adopts a spring/screw design, which is firm and reliable in wiring, and supports multi wire parallel connection.

Equipped with overcurrent/overvoltage protection circuits to enhance the operational safety of modules and on-site equipment.

The working temperature range is 0-60 ° C, suitable for stable operation in industrial control rooms.

Protection level IP20, only used for installation inside cabinets, dustproof and anti misoperation.

Equipped with CE and ATEX explosion-proof certifications, it can be used in hazardous zone 2 environments.

Module ID: 12P0558X152, compatible with DeltaV system configuration and diagnostic management.

Support EDD electronic device description to achieve remote status monitoring and fault diagnosis.

Mainly used for safety interlock circuits such as ESD emergency shutdown, valve control, motor start stop, alarm output, etc.

ending

This terminal module has reliable isolation, standardized wiring, and convenient maintenance, and is the core supporting component for the DeltaV system to achieve safe and stable operation of high-voltage AC output circuits.

KJ3001X1-BH1端子模块 产品展示

产品视频

3.其他产品

ZOOM LENS 18-10812.5变焦镜头
BENTLY 350042M 176449-02T电源模块
GE ACC-5595-208 350-805595-208继电器模块

4.其他英文产品

PILZ A.F.051.501 08.04 Data Logger
PILZ 680003 4869L4+4753L4 hybrid and discrete drive
AFP9075355 3BHS537443 voltage regulator

The content is from Ruichang Mingsheng Automation Equipment Co., LTD

Contact: +86 15270269218