IC697PWR711电源供应适配器  

1.产 品 资 料 介 绍：

IC697PWR711 电源模块简介

1. 适用于 GE Fanuc Series 90-70 PLC 系统。
2. 额定输出功率 100W，安装在机架最左侧槽位。
3. 输入可跳线选择 120/240VAC，也支持 125VDC 输入。
4. 输出 + 5VDC、+12VDC、-12VDC 三路电压。
5. 具备过压、过流、短路保护功能。
6. 掉电保持时间≥21ms，支持系统安全停机。
7. 可通过专用线缆扩展给第二机架供电。
8. 带 ACFAIL 故障检测与系统复位信号。
9. 工业级设计，抗干扰能力强。
10. 有防爆认证版本 IC697PWR711-FM。
11. 安装时必须可靠接地，规范接线。
12. 严禁带电插拔，维护需断电操作。
13. 可搭配电池实现掉电数据保持。
14. 目前以备件、翻新件为主。

IC697PWR711电源供应适配器  英文资料：

Introduction to IC697PWR711 Power Module

IC697PWR711 is a rack mounted power module specifically designed for GE Fanuc 90-70 PLC systems, primarily providing stable power supply for control systems and widely used in industrial automation sites.

Suitable for GE Fanuc Series 90-70 PLC system.

Rated output power of 100W, installed in the leftmost slot of the rack.

The input can be jumper to ｓｅｌｅｃｔ 120/240VAC, and also supports 125VDC input.

Output three voltages:+5VDC,+12VDC, and -12VDC.

Equipped with overvoltage, overcurrent, and short-circuit protection functions.

Power down holding time ≥ 21ms, supports system safe shutdown.

It can be extended to supply power to the second rack through a dedicated cable.

Equipped with ACFAIL fault detection and system reset signal.

Industrial grade design with strong anti-interference ability.

There is an explosion-proof certified version IC697PWR711-FM.

Reliable grounding and standardized wiring are necessary during installation.

It is strictly prohibited to plug or unplug with power on, and maintenance requires power-off operation.

Can be paired with batteries to achieve data retention in case of power failure.

At present, the main products are spare parts and refurbished parts.

IC697PWR711 has stable performance and complete protection, and is a commonly used power supply module in 90-70 PLC systems, suitable for various industrial control scenarios.

IC697PWR711电源供应适配器 产品展示

产品视频

3.其他产品

ABB KUC755AE117 3BHB005243R0117体系掌握器
ABB PCD530A102 3BHE041343R0102 模块
KONGSBERG RMP201-8输入模块

4.其他英文产品

METSO D201129 Digital Output Unit
METSO D201126 Valve Positioner
NI PCI-6251 Data Acquisition Card

The content is from Ruichang Mingsheng Automation Equipment Co., LTD

Contact: +86 15270269218