P0916TA FBM242通道隔离输出模块

1.产 品 资 料 介 绍：

P0916TA FBM242 通道隔离输出模块

1. 属于 Foxboro I/A Series DCS 系统，为 16 通道外部供电、通道全隔离离散量输出模块。
2. 每通道独立电气隔离，通道间、通道对地耐受 600VAC/1min，抗干扰、防地环流，适配复杂工业现场。
3. 外部电源供电，支持 15–60VDC（单通道最大 2A）、120VAC/125VDC、240VAC 多电压等级输出。
4. 适配固态开关与继电器输出，可驱动电磁阀、指示灯、中间继电器、阀门执行器等负载。
5. 支持故障安全配置，系统故障时输出可预设为安全状态（常开 / 常闭），提升系统安全性。
6. 具备 LED 状态指示，可直观查看模块运行、通信及各通道输出状态，便于快速诊断。
7. 支持冗余 2Mbps 现场总线通信，保障与控制器的稳定数据交互。
8. 支持在线热插拔，维护时无需断电拆线，不影响系统连续运行。
9. 工业级宽温设计，工作温度 - 40℃~85℃，满足 G3 严酷工业环境标准。
10. 模块化结构，DIN 导轨安装，配合专用端子组件，部署与接线便捷。
11. 无缝集成 I/A Series 控制系统，支持梯形逻辑、在线诊断与状态监控。
12. 适用于石油化工、电力、冶金、水处理等行业的设备控制、报警输出与联锁控制场景。

P0916TA FBM242通道隔离输出模块 英文资料：

P0916TA FBM242 Channel Isolation Output Module

Belonging to the Foxboro I/A Series DCS system, it is a 16 channel external power supply and channel fully isolated discrete output module.

Each channel is independently electrically isolated, with a tolerance of 600VAC/1min between channels and to ground. It is resistant to interference and ground circulation, and is suitable for complex industrial sites.

External power supply, supporting 15-60VDC (maximum 2A per channel), 120VAC/125VDC, 240VAC multi voltage level output.

Compatible with solid-state switches and relay outputs, it can drive loads such as solenoid valves, indicator lights, intermediate relays, valve actuators, etc.

Support fail safe configuration, the output can be pre-set to a safe state (normally open/normally closed) in case of system failure, enhancing system security.

Equipped with LED status indication, it can intuitively view the operation, communication, and output status of each channel of the module, facilitating quick diagnosis.

Support redundant 2Mbps fieldbus communication to ensure stable data exchange with the controller.

Support online hot plugging, no need to disconnect power during maintenance, and do not affect the continuous operation of the system.

Industrial grade wide temperature design, operating temperature range of -40 ℃~85 ℃, meeting the strict industrial environment standards of G3.

Modular structure, DIN rail installation, combined with dedicated terminal components, easy deployment and wiring.

Seamless integration of I/A Series control system, supporting ladder logic, online diagnosis, and status monitoring.

Suitable for equipment control, alarm output, and interlocking control scenarios in industries such as petrochemicals, power, metallurgy, and water treatment.

This module, with its full isolation, multi voltage adaptation, fault safety, and high reliability characteristics, is the core output component for achieving precise and safe control of on-site equipment in industrial DCS systems. It can effectively ensure the stable operation and production safety of the control system.

P0916TA FBM242通道隔离输出模块 产品展示

产品视频

3.其他产品

HONEYWELL CC-PCF901控制模块
Vibro MPC4 200-510-076-114振动计卡
Vibro IOCN 200-566-000-112通讯板

4.其他英文产品

3BSE028602R1 DO880 Input/Output Module
WOODWARD PCU-DPIO button speed controller
YPK117A 61163280 embedded analog module

The content is from Ruichang Mingsheng Automation Equipment Co., LTD

Contact: +86 15270269218