193X717AAG01电源模块

GE  193X717AAG01电源模块

1.产 品 资 料 介 绍：

中文资料：

一、产品简介
193X717AAG01 是 GE（通用电气）生产的 193X 系列中的电源模块，专门设计用于为 GE 的工业控制系统、驱动系统或发电控制系统提供稳定的电力供应。该模块用于转换和调节电源，确保系统内部各个模块的电力需求得到满足，并提供保护功能。

二、主要功能

1. 电压转换与调节：将主电源（如 AC 或 DC）转换为系统所需的标准电压，常见输出为 +15V、-15V 和 +5V。

2. 电流供应：提供稳定的电流输出，满足多个控制模块和传感器的电力需求。

3. 过电压与过电流保护：内置电流和电压保护电路，防止因电源异常导致系统损坏。

4. 负载调节：能够自动调整输出电压，以适应负载变化，保持系统稳定运行。

5. 冗余设计：支持双电源输入或冗余电源配置，提高系统的可靠性和稳定性。

6. 过热保护：内置温度传感器，实时监测模块温度，防止过热引起的故障。

三、技术参数（典型值，参考用途）

• 输入电压：AC 220V 或 DC 24V（可根据系统需求选择）

• 输出电压：+15V、-15V、+5V（标准输出）

• 输出电流能力：5A（具体取决于输出电压和负载要求）

• 输出功率：约 75W（取决于配置和负载）

• 效率：≥85%（典型）

• 过载保护：支持短路、过电流、过电压保护

• 工作温度：-10°C 到 +60°C

• 安装方式：标准 193X 插卡式结构

• 尺寸：符合 193X 系列标准尺寸（大约 25 × 15 cm）

四、应用领域

• 工业控制系统：用于各种工业自动化设备中，保证控制板、传感器和执行机构正常工作。

• 驱动系统：为变频驱动、大功率电机控制系统等提供稳定电源。

• 发电厂控制：为火力、水力、风力发电系统中的控制设备提供电力。

• 电力设备：为配电系统中的控制和保护设备供电。

• 数据中心：用于提供稳压电源，以支持计算机及相关设备运行。

英文资料：

Brief introduction

193X717AAG01 is a power module in the 193X series produced by GE, specifically designed to provide stable power supply for GE's industrial control systems, drive systems, or power generation control systems. This module is used to convert and regulate power sources, ensuring that the power requirements of various modules within the system are met, and providing protection functions.

2、 Main functions

Voltage conversion and regulation: Convert the main power supply (such as AC or DC) to the standard voltage required by the system, with common outputs of+15V, -15V, and+5V.

Current supply: Provides stable current output to meet the power needs of multiple control modules and sensors.

Overvoltage and overcurrent protection: Built in current and voltage protection circuits to prevent system damage caused by abnormal power supply.

Load regulation: It can automatically adjust the output voltage to adapt to load changes and maintain stable system operation.

Redundant design: Supports dual power input or redundant power configuration to improve system reliability and stability.

Overheating protection: Built in temperature sensor, real-time monitoring of module temperature to prevent faults caused by overheating.

3、 Technical parameters (typical values, reference purposes)

Input voltage: AC 220V or DC 24V (can be selected according to system requirements)

Output voltage:+15V, -15V,+5V (standard output)

Output current capability: 5A (depending on output voltage and load requirements)

Output power: approximately 75W (depending on configuration and load)

Efficiency: ≥ 85% (typical)

Overload protection: supports short circuit, overcurrent, and overvoltage protection

Working temperature: -10 ° C to+60 ° C

Installation method: Standard 193X plug-in card structure

Size: Complies with the 193X series standard size (approximately 25 × 15 cm)

4、 Application Fields

Industrial control system: used in various industrial automation equipment to ensure the normal operation of control boards, sensors, and actuators.

Drive system: provides stable power supply for variable frequency drive, high-power motor control system, etc.

Power plant control: providing power to control equipment in thermal, hydraulic, and wind power generation systems.

Power equipment: supplies power to control and protection devices in the distribution system.

Data center: used to provide regulated power supply to support the operation of computers and related equipment.

2.产      品      展      示      

3.其他产品

 002-1-23158-10 印刷电路板

 68-0061-10单板计算机

 EXP-MX扩展模块

4.其他英文产品

RadiSys 61-0475-12 Axis Control Module

RADISYS 97-9536-20 Ethernet Port Module

RADISYS 451558-004 Communication Module