ATLAS COPCO PF3107-C-PB-HW紧凑型控制器

Atlas Copco PF3107-C-PB-HW紧凑型控制器

1.产 品 资 料 介 绍：

一、产品概述

ATLAS COPCO PF3107-C-PB-HW 是 Power Focus 3100 系列中的紧凑型拧紧控制器，适用于驱动 Tensor 3 至 Tensor 7 系列直流电动工具。该型号带有 PROFIBUS（PB）工业总线接口，特别适合嵌入式、模块化或空间受限的工业装配工位。

它结合了高度可靠的过程控制能力、工业总线通信支持和简洁的结构设计，常用于中高端自动化装配应用。

二、技术参数简要

• 型号全称：PF3107-C-PB-HW

• 通信接口：PROFIBUS（PB）

• 输入电压：90–240V AC，50/60Hz

• 最大输出功率：约 300W

• 支持工具：Tensor ST、Tensor DS、Tensor SL 等 3–7 系列

• 控制功能：扭矩控制、角度控制、组合控制、多步工艺支持

• 安装方式：紧凑型设计，适合独立工位或控制柜安装

三、典型应用领域

1. 汽车制造

• 驱动总成：发动机、变速箱、悬挂系统等部位的关键紧固

• 车身装配：座椅骨架、门铰链、前大灯等需中等扭矩的连接件

• 自动化产线：与机器人、PLC、工位控制系统通过 PROFIBUS 通信

2. 工业设备制造

• 电机、泵体、压缩机等模块部件装配

• 自动测试与拧紧工位控制

• 适用于中等复杂度的电气和机械装配工艺

3. 工程机械与商用车辆

• 装配中对拧紧一致性和工艺追溯有要求的部件，如液压接头、结构框架

• 扭矩控制精度要求高，适合搭配高精度传感工具使用

4. 家电和电子产品

• 壳体、压缩机、线束固定等工艺

• 适用于多产品并线、柔性制造单元（FMS）环境

英文资料：

1、 Product Overview

ATLAS COPCO PF3107-C-PB-HW is a compact tightening controller in the Power Focus 3100 series, suitable for driving Tensor 3 to Tensor 7 series DC power tools. This model comes with a PROFIBUS (PB) industrial bus interface, making it particularly suitable for embedded, modular, or space constrained industrial assembly stations.

It combines highly reliable process control capabilities, industrial bus communication support, and simple structural design, commonly used in mid to high end automation assembly applications.

2、 Brief Technical Parameters

Model name: PF3107-C-PB-HW

Communication interface: PROFIBUS (PB)

Input voltage: 90-240V AC, 50/60Hz

Maximum output power: approximately 300W

Supporting tools: Tensor ST, Tensor DS, Tensor SL, and other 3-7 series

Control functions: torque control, angle control, combination control, multi-step process support

Installation method: Compact design, suitable for independent workstations or control cabinet installation

3、 Typical application areas

1. Automobile manufacturing

Drive assembly: key fasteners for engine, gearbox, suspension system and other parts

Body assembly: Seat frame, door hinges, front headlights and other connectors that require moderate torque

Automated production line: with robots PLC、 The workstation control system communicates through PROFIBUS

2. Industrial equipment manufacturing

Assembly of module components such as motors, pump bodies, compressors, etc

Automatic testing and tightening station control

Suitable for electrical and mechanical assembly processes with moderate complexity

3. Construction machinery and commercial vehicles

Components that require consistent tightening and process traceability during assembly, such as hydraulic joints and structural frames

High precision requirements for torque control, suitable for use with high-precision sensing tools

4. Home appliances and electronic products

Shell, compressor, wiring harness fixing and other processes

Suitable for multi product parallel production and flexible manufacturing unit (FMS) environments

2.产      品      展      示      

3.其他产品

 68-0061-10单板计算机

jetter JM-204-480-JC310-S1伺服驱动器

1C31197G01 定位器模块

4.其他英文产品

GE IS210BPPBH2BMD Controller Module

KOLLMORGEN CP310250 PRD-P310250Z-55 serv

IS420PUAAH1A Ethernet Switch

The content is from Ruichang Mingsheng Automation Equipment Co., LTD

Contact: +86 15270269218