GIDINGS&LEWIS 401-56452-00驱动器

1.产 品 资 料 介 绍：

GIDDINGS & LEWIS 401-56452-00 驱动器解析

一、产品概述

二、技术参数（典型特性）

• 产品型号：401-56452-00
• 功能定位：专注于伺服电机驱动的工业级伺服驱动器，适配高精度运动控制场景
• 输入信号：可稳定接收 CNC 控制器、PLC（可编程逻辑控制器）下发的运动控制指令（如脉冲信号、模拟量指令），指令识别精高，避免信号传输偏差导致的控制误差
• 输出特性：具备强劲的驱动能力，可直接驱动伺服电机运转，通过精准的电流、电压调节，实现电机转速（如主轴高速稳定旋转）、扭矩（如负载变化时的力矩补偿）、位置（如进给轴精准定位）的精确控制，满足不同工况下的运动需求
• 控制方式：支持多模式闭环控制，包括速度环控制（稳定维持电机设定转速，抗负载扰动能力强）、位置环控制（精确定位电机至目标位置，定位误差小）、扭矩环控制（精准输出设定力矩，适配负载恒定场景），三种模式可根据应用需求灵活切换
• 保护功能：集成全方位电气保护机制，过流保护（防止电机过载、短路导致电流超标烧毁部件）、过压 / 欠压保护（抵御电网电压波动冲击内部电路）、过温保护（模块温度过高时自动降额或停机，避免硬件损坏）、短路保护（检测到电路短路时快速切断输出，防止故障扩大），全方位保障驱动器与伺服电机安全
• 安装方式：采用模块化结构设计，尺寸适配工业标准机柜，可与其他控制模块（如 CPU 模块、I/O 模块）集成安装；模块插拔便捷，后期维护或故障更换时无需复杂布线，大幅缩短停机时间
• 环境适应性：按工业级防护标准设计，选用耐高低温、抗潮湿的元器件，可在 - 20℃~65℃温度范围、相对湿度≤95%（无凝露）环境下正常工作；同时具备强抗电磁干扰能力，能抵御工业现场电机启停、高压设备运行产生的电磁辐射，确保驱动性能稳定

英文资料：

GIDINGS&LEWIS 401-56452-00 Drive Analysis

1、 Product Overview

GIDINGS&LEWIS 401-56452-00 driver is the core servo drive unit in industrial automation systems and CNC machine tools, responsible for the key function of "instruction conversion motor drive". It can accurately receive motion instructions issued by control systems such as CPU modules and central control modules. Through internal signal processing and algorithm operations, the instructions are converted into precise driving signals that can be recognized by servo motors, thereby achieving fine control of motor speed, torque, and position parameters. This driver, with its high-performance driving capability, industrial grade reliability, and adaptability to complex working conditions, has become the core bridge connecting the "control center" and "execution components" in motion control systems, ensuring stable and accurate motion control for CNC machine tools, automation equipment, and other devices.

2、 Technical parameters (typical characteristics)

Product model: 401-56452-00

Functional positioning: Focused on industrial grade servo drives driven by servo motors, suitable for high-precision motion control scenarios

Input signal: It can stably receive motion control instructions (such as pulse signals and analog commands) issued by CNC controllers and PLC (programmable logic controllers), with high accuracy in instruction recognition, avoiding control errors caused by signal transmission deviations

Output characteristics: With strong driving capability, it can directly drive servo motors to operate. Through precise current and voltage regulation, it can achieve precise control of motor speed (such as high-speed stable rotation of the spindle), torque (such as torque compensation when the load changes), and position (such as precise positioning of the feed axis), meeting the motion requirements under different working conditions

Control mode: Supports multi-mode closed-loop control, including speed loop control (stable maintenance of motor set speed, strong resistance to load disturbance), position loop control (precise positioning of motor to target position, small positioning error), torque loop control (precise output of set torque, suitable for constant load scenarios), and the three modes can be flexibly switched according to application needs

Protection function: Integrated with comprehensive electrical protection mechanism, overcurrent protection (preventing motor overload, short circuit from causing excessive current and burning out components), overvoltage/undervoltage protection (resisting internal circuit impact caused by grid voltage fluctuations), overtemperature protection (automatic derating or shutdown when module temperature is too high to avoid hardware damage), short circuit protection (quickly cutting off output when circuit short circuit is detected to prevent fault expansion), ensuring the safety of the driver and servo motor in all aspects

Installation method: Adopting a modular structure design, the size is compatible with industrial standard cabinets, and can be integrated with other control modules (such as CPU modules, I/O modules) for installation; Easy module insertion and removal, no need for complex wiring during later maintenance or fault replacement, greatly reducing downtime

Environmental adaptability: Designed according to industrial grade protection standards, using components that are resistant to high and low temperatures and moisture, and can work normally in an environment with a temperature range of -20 ℃~65 ℃ and a relative humidity of ≤ 95% (no condensation)

2.产      品      展      示      

3.其他产品

SANYO  P30B06010DXS8SM 伺服电机

Areva  MVAX31S1DE0754A 监视继电器模块

 EPC-26A中央控制器模块

4.其他英文产品

Eaton XV-440-10TVB-1-50 Touch Screen

FOXBORO FBM217 Voltage Monitor Module 

HONEYWELL 05704-A-0146 Digital

The content is from Ruichang Mingsheng Automation Equipment Co., LTD

Contact: +86 15270269218