邮箱:stodcdcs@gmail.com

手机/微信/WhatsApp

+86 15270269218

stodcdcs@gmail.com

Sanki Technos CR-712T-A末端执行器

发布时间:2026-09-08人气:
  • Sanki Technos CR-712T-A末端执行器
  • Sanki Technos CR-712T-A末端执行器
  • Sanki Technos CR-712T-A末端执行器

Sanki Technos CR-712T-A末端执行器 

1.产 品 资 料 介 绍:

Sanki Technos CR‑712T‑A 末端执行器,是半导体设备用来搬运晶圆的机械手卡爪。
产品特点:
1、高洁净材质,产尘少,适配洁净车间生产环境
2、晶圆边缘夹持,不触碰芯片有效区域,减少碎片风险
3、原装模块化结构,直接对位安装,现场更换省事
4、夹持力度可控,高速搬运时晶圆不易打滑偏移
5、适合高频循环取放,满足产线长时间连续作业
产品参数:
1、匹配半导体机械手标准安装接口
2、适配标准尺寸晶圆搬运作业
3、适应设备内部洁净间常规工作温度
4、自带夹持到位信号反馈,给到机台主控
5、整体轻量化,不会加大机械手负载压力
应用领域:
1、EFEM 设备晶圆传输抓取搬运
2、刻蚀设备腔室晶圆进出传送
3、薄膜沉积设备机械手末端取片作业
4、老旧机台抓手磨损损坏备件替换
5、设备维护后晶圆搬运动作调试校准
Sanki Technos CR‑712T‑A 抓手的夹持稳定性,直接影响晶圆碎片率,是物料传输环节很关键的部

Sanki Technos CR-712T-A末端执行器 产品英文介绍

Sanki Technos CR-712T-A end effector is a robotic gripper used in semiconductor equipment to transport wafers.

Product Features:

1. High purity material, low dust production, suitable for clean workshop production environment

2. Wafer edge clamping, not touching the effective area of the chip, reducing the risk of debris

3. Original modular structure, direct alignment installation, easy on-site replacement

4. The clamping force is controllable, and the wafer is not easy to slip or deviate during high-speed handling

5. Suitable for high-frequency cyclic loading and unloading, meeting the long-term continuous operation of the production line

Product Parameters:

1. Matching semiconductor robotic arm standard installation interface

2. Adapt to standard size wafer handling operations

3. Adapt to the regular working temperature of the clean room inside the equipment

4. Comes with clamping in place signal feedback, which is provided to the main control of the machine

5. Overall lightweight, without increasing the load pressure of the robotic arm

Application fields:

1. EFEM equipment wafer transfer, grabbing, and handling

2. Etching equipment chamber wafer transfer in and out

3. Thin film deposition equipment mechanical arm end picking operation

4. Old machine gripper worn and damaged, replacement of spare parts

5. Debugging and calibration of wafer handling actions after equipment maintenance

The clamping stability of the Sanki Technos CR-712T-A gripper directly affects the wafer fragmentation rate and is a critical component in the material transfer process

Sanki Technos CR-712T-A末端执行器 产品展示

CR-712T-A.webp.jpg

视频展示


其他产品

TRICONEX MP3009X/TCM 4355X 主处理器
REXROTH SYHNC100-NIB-2X/W-24-P-D-E23-A012 伺服电机
TRICONEX TCM 4355X 通信模块 

英文产品

VARIAN 110531004 Industrial control framework
A-B 2094-BM01-S/B channel module
 AZ20/112112221112E/STD Industrial control module

PXIe-6363R43HEAA-R2-NS-NV-00R45GCAA-R2-NS-NV-80
PXIe-6259R21HSNA-R1-NS-VS-04R32GENP-R2-NS-NV-00
PXIe-5673ER88SENA-T2-SS-NV-03S32GMNA-RNNE-00
PXIe-5665R34JENC-R2-NS-VS-00R33HENC-R2-NS-NV-00
PXIe-5653R33HDNC-R2-NS-NV-00R33GENC-TS-NS-NV-00
PXIe-5652R27SSNA-R1-NS-NV-02R23HENA-R1-NS-VS-00

The content is from Ruichang Mingsheng Automation Equipment Co., LTD

Contact: +86 15270269218 

推荐资讯

+86 15270269218