AMAT Applied Materials 0100-35082接口模块
1.产 品 资 料 介 绍：
- 适用系统：优先适配 AMAT Centura 系列蚀刻设备，兼容同类 AMAT 半导体处理设备
- 信号类型：模拟量输入 4 路（4-20mA/0-10V）、模拟量输出 2 路（4-20mA/0-10V）；数字量输入 8 路（24V DC）、数字量输出 4 路（24V DC，1A）
- 通信接口：RS485（Modbus-RTU 协议）、以太网（TCP/IP），支持与设备主控单元实时通信
- 防护与环境：防护等级 IP54，工作温度 - 10℃-60℃，抗电磁干扰符合 EN 61000-6-2 标准
- 物理尺寸：长 120mm× 宽 80mm× 高 35mm，安装开孔适配原厂设备柜体，卡扣 + 螺丝固定
- 电源需求：DC 24V±10%，功耗≤8W，具备过压（30V）、欠压（18V）保护
- 原厂兼容：尺寸、接口、协议与原厂完全匹配，即插即用，替换调试≤30 分钟
- 抗干扰强：模拟量信号采用差分传输，数字量接口带光耦隔离，减少电磁干扰导致的信号失真
- 高可靠性：关键器件为工业级，平均无故障运行时间（MTBF）≥4 万小时，适应车间长期运行
AMAT Applied Materials 0100-35082接口模块 英文资料：
1、 Product Overview
The AMAT 0100-35082 interface module is the core component for signal conversion and transmission in semiconductor etching equipment (such as the AMAT Centura series). It mainly realizes signal interaction between the equipment main control unit and sensors, actuators (such as valves and motors), covering bidirectional conversion of analog quantities (temperature and pressure signals) and digital quantities (switch status, control instructions). At the same time, it has the ability to resist electromagnetic interference and adapt to the complex electromagnetic environment of semiconductor workshops. It can directly ｒｅｐｌａｃｅ old modules from the original factory without the need to modify equipment circuits.
2、 Key parameters
Applicable system: Priority adaptation to AMAT Centura series etching equipment, compatible with similar AMAT semiconductor processing equipment
Signal type: 4 analog inputs (4-20mA/0-10V), 2 analog outputs (4-20mA/0-10V); 8 digital inputs (24V DC), 4 digital outputs (24V DC, 1A)
Communication interface: RS485 (Modbus RTU protocol), Ethernet (TCP/IP), supporting real-time communication with the device control unit
Protection and Environment: Protection level IP54, working temperature -10 ℃ -60 ℃, anti electromagnetic interference in accordance with EN 61000-6-2 standard
Physical dimensions: 120mm in length, 80mm in width, and 35mm in height. The installation holes are compatible with the original equipment cabinet, and are fixed with buckles and screws
Power requirement: DC 24V ± 10%, power consumption ≤ 8W, with overvoltage (30V) and undervoltage (18V) protection
3、 Core advantages
Original factory compatibility: The size, interface, and protocol are completely matched with the original factory, plug and play, and replacement debugging takes ≤ 30 minutes
Strong anti-interference: Analog signals are transmitted differentially, and digital interfaces are isolated with optocouplers to reduce signal distortion caused by electromagnetic interference
High reliability: The key components are industrial grade, with an average time between failures (MTBF) of ≥ 40000 hours, suitable for long-term operation in the workshop
AMAT Applied Materials 0100-35082接口模块 产品展示
产品视频
3.其他产品
Watlow CLS204-1200000 温度控制器
TMEIC ARND-3110A控制模块
BENDER IRDH575B1W-435地面故障探测器
4.其他英文产品
FBM219 RH916RH Thermal resistance module
FBM237 RH914XS Digital module
NI SCXI-1349 Output interface card
| AMAT 0190-37178 | AMAT 0190-76101 | C400/10/1/1/1/00 |
| AMAT 0190-54047 | AMAT 0190-76142 | LDGRB-01 3BSE013177R1 |
| AMAT 0190-01486 | AMAT 0190-76150 | 140CPU67160 |
| AMAT 0190-66024 | AMAT 0190-76185 | 3500/72-01-00 140734-08 |
| AMAT 0190-16010 | AMAT 0190-76252 | 369-LO-0-M-0-0-0-E |
| AMAT 0190-54639 | AMAT 0190-76263 | PCD231B |
The content is from Ruichang Mingsheng Automation Equipment Co., LTD
Contact: +86 15270269218
