IC697HSC700高速计数器卡电路板

1.产 品 资 料 介 绍：

IC697HSC700 高速计数器卡电路板

一、核心硬件与接口

1. 单槽位 90‑70 机架安装，直接接入 VME 背板，不占用额外空间。
2. 提供12 路输入：支持单端 / 差分、TTL / 非 TTL、磁电式传感器（MPU）信号，兼容编码器、流量计、接近开关。
3. 配备4 路正向逻辑输出，带独立 LED 状态灯，用于预设值触发、报警或外部设备控制。
4. 内置 **+5VDC 辅助电源输出 **，可直接为外部传感器供电；支持外部晶振接入，提升计数精度。
5. 输入输出光电隔离，抗工业电磁干扰，保障信号稳定。

二、计数性能与模式

1. 支持5 种计数类型（A/B/C/D/E），覆盖单 / 双向计数、A/B 相正交、脉冲 / 方向、预置 / 复位等场景。
2. 常规模式（A‑D）最高计数频率200kHz；E 型 A/B 正交模式最高800kHz，满足超高速脉冲采集。
3. 内置高低频滤波：高频滤波 2.5μs、低频滤波 12.5ms，适配不同信号稳定性需求。
4. 独立硬件计数，无需 CPU 参与，响应实时、无通信延迟。
5. 支持计数使能、预加载、比较匹配、中断触发，逻辑灵活。

三、配置与通信

1. 全软件配置，通过以太网 TCP/IP 或 SNP 端口，在 Windows/MS‑DOS 环境下完成参数设置。
2. 支持 PLC 梯形图中断，计数事件可直接触发 CPU 程序，实现闭环控制。
3. 状态实时反馈：运行、计数、输出、故障等状态可通过 LED 与 PLC 寄存器读取。

四、环境与应用

1. 工业级宽温：-20℃~70℃，适应车间、现场等恶劣环境。
2. 典型应用：旋转编码器位置反馈、涡轮流量计流量计量、电机转速监测、包装机计数、物料输送定位、高速分拣控制。

五、关键优势

• 独立高速处理，不占用 CPU 资源，系统整体响应更快。
• 多模式、多信号兼容，适配各类工业传感器与编码器。
• 硬件滤波 + 光电隔离，抗干扰强，计数精准可靠。
• 单槽紧凑、软件配置，部署与维护便捷。

IC697HSC700高速计数器卡电路板 英文资料：

IC697HSC700 high-speed counter card circuit board

IC697HSC700 is a GE Fanuc 90-70 series dedicated high-speed counting module designed for high-frequency pulse signal acquisition, position/velocity/flow measurement. It can independently process high-speed counting and output control, greatly reducing CPU load and adapting to high-precision scenarios such as motion control, material measurement, and speed monitoring.

1、 Core hardware and interfaces

Single slot 90-70 rack installation, directly connected to VME backplane, does not occupy additional space.

Provide 12 inputs: support single ended/differential, TTL/non TTL, magnetic electric sensor (MPU) signals, compatible with encoders, flow meters, and proximity switches.

Equipped with 4 forward logic outputs and independent LED status lights, used for preset value triggering, alarm or external device control.

Built in * *+5VDC auxiliary power output * *, which can directly supply power to external sensors; Support external crystal oscillator access to improve counting accuracy.

Input/output optoelectronic isolation, resistant to industrial electromagnetic interference, ensuring signal stability.

2、 Counting performance and mode

Supports 5 counting types (A/B/C/D/E), covering single/bidirectional counting, A/B phase orthogonal, pulse/direction, preset/reset, and other scenarios.

The maximum counting frequency in regular mode (A-D) is 200kHz; The E-type A/B orthogonal mode has a maximum frequency of 800kHz, which meets the requirements of ultra high speed pulse acquisition.

Built in high and low frequency filtering: high frequency filtering 2.5 μ s, low frequency filtering 12.5ms, suitable for different signal stability requirements.

Independent hardware counting, no CPU involvement, real-time response, no communication delay.

Supports counting enablement, preloading, comparison matching, interrupt triggering, and flexible logic.

3、 Configuration and Communication

Full software configuration, complete parameter settings through Ethernet TCP/IP or SNP ports in Windows/MS-DOS environment.

Supports PLC ladder diagram interrupts, and counting events can directly trigger CPU programs to achieve closed-loop control.

Real time feedback of status: Running, counting, output, fault and other statuses can be read through LED and PLC registers.

4、 Environment and Applications

Industrial grade wide temperature range: -20 ℃~70 ℃, suitable for harsh environments such as workshops and sites.

Typical applications: rotary encoder position feedback, turbine flowmeter flow measurement, motor speed monitoring, packaging machine counting, material conveying positioning, high-speed sorting control.

5、 Key advantages

Independent high-speed processing, does not occupy CPU resources, and the overall system response is faster.

Multi mode and multi signal compatibility, suitable for various industrial sensors and encoders.

Hardware filtering+optoelectronic isolation, strong anti-interference, accurate and reliable counting.

Compact single slot, software configuration, easy deployment and maintenance.

IC697HSC700高速计数器卡电路板 产品展示

产品视频

3.其他产品

ABB 5SHY5055L0002 3BHE019719R0101 GVC736BE101IGCT模块
AB 700-PKT B打仗器模块
ABB CI532V05 3BSE007297R1控制器模块

4.其他英文产品

SS822 Input/Output Module
FOXBORO P0922YU FPS400-24 power module
Bently 1701/15 Proximitor Module

The content is from Ruichang Mingsheng Automation Equipment Co., LTD

Contact: +86 15270269218