TRICONEX 3625数字 I/O 模块
1.产 品 资 料 介 绍：
- 高可靠性信号处理：TRICONEX 3625 数字 I/O 模块采用三重模块化冗余（TMR）架构，每路 I/O 信号均经过独立通道采集与校验，有效避免单点故障导致的数据偏差，适配石油化工、核电等对信号可靠性要求极高的安全场景。
- 丰富 I/O 通道配置：模块集成 32 路数字输入与 32 路数字输出通道，输入支持干接点、PNP/NPN 电平信号，输出可驱动继电器、电磁阀等执行元件，单模块即可满足中小型设备的信号采集与控制需求。
- 安全等级合规设计：符合 IEC 61508 SIL 3 安全标准，通过 TÜV 莱茵认证，具备故障安全输出功能，当模块检测到自身故障时，可自动将输出切换至预设安全状态，杜绝危险工况发生。
- 快速信号响应能力：数字输入信号响应时间低至 1ms，输出信号切换延迟小于 2ms，能快速捕捉设备状态变化并执行控制指令，适配高速生产线、紧急停车系统等对响应速度要求严格的场景。
- 宽电压适配范围：输入电压支持 24V DC（±10%），输出电压兼容 24V DC/110V AC，可适配不同工业设备的电源规格，无需额外配置电压转换模块，降低系统集成成本。
- 便捷的在线维护：支持热插拔功能，在系统不停机的情况下即可完成模块更换或检修，同时模块自带通道状态指示灯，可直观判断每路 I/O 的工作状态，缩短故障排查时间。
- 抗干扰性能优异：采用光电隔离技术，输入输出通道与背板总线之间隔离电压达 2500V AC，有效抑制工业现场的电磁干扰（EMI）与射频干扰（RFI），保障信号传输稳定。
- 灵活的系统集成：兼容 TRICONEX Tricon、Trio 等系列安全控制系统，通过 TRICONEX 专用通信总线与控制器实现高速数据交互，同时支持第三方 SCADA 系统接入，便于集中监控与管理。
TRICONEX 3625数字 I/O 模块 英文资料：
High reliability signal processing: The TRICONEX 3625 digital I/O module adopts a triple modular redundancy (TMR) architecture, where each I/O signal is collected and verified through an independent channel, effectively avoiding data bias caused by single point failures and adapting to safety scenarios such as petrochemicals and nuclear power that require extremely high signal reliability.
Rich I/O channel configuration: The module integrates 32 digital inputs and 32 digital output channels. The input supports dry contacts and PNP/NPN level signals, and the output can drive actuators such as relays and solenoid valves. A single module can meet the signal acquisition and control needs of small and medium-sized devices.
Safety level compliant design: Compliant with IEC 61508 SIL 3 safety standard, certified by T Ü V Rheinland, with fail safe output function. When the module detects its own fault, it can automatically switch the output to the preset safety state to prevent dangerous working conditions from occurring.
Fast signal response capability: The digital input signal response time is as low as 1ms, and the output signal switching delay is less than 2ms. It can quickly capture device status changes and execute control instructions, and is suitable for scenarios such as high-speed production lines and emergency stop systems that require strict response speed.
Wide voltage adaptation range: The input voltage supports 24V DC (± 10%), and the output voltage is compatible with 24V DC/110V AC. It can adapt to different power specifications of industrial equipment without the need for additional voltage conversion modules, reducing system integration costs.
Convenient online maintenance: Supports hot swapping function, allowing module replacement or maintenance to be completed without shutting down the system. At the same time, the module comes with channel status indicator lights, which can intuitively determine the working status of each I/O channel and shorten troubleshooting time.
Excellent anti-interference performance: using optoelectronic isolation technology, the isolation voltage between the input and output channels and the backplane bus reaches 2500V AC, effectively suppressing electromagnetic interference (EMI) and radio frequency interference (RFI) in industrial sites, ensuring stable signal transmission.
Flexible system integration: compatible with safety control systems such as Tricon and Trio series, high-speed data exchange is achieved with the controller through the dedicated communication bus of TriconeX, and third-party SCADA system access is supported for centralized monitoring and management.
TRICONEX 3625数字 I/O 模块 产品展示
产品视频
3.其他产品
DEIF OPM-1 输出模块
DEIF PSM-1 电源供应模块
DEIF SCM-1适配器模块
4.其他英文产品
BENTLY 330180-51-05 Sensor
Emerson KJ3102X1-BA1 Controller Module
YASKAWA CP-9200SH/CPU Logic Controller
| IC3600KRSD2 | 531X139APMABM6 | IC3600AFGC1B |
| IC3600KRSD1 | 531X139APMAAM6 | IC3600AFGB1C1B |
| IC3600KRSC2 | 531X138RDGBCG1 | IC3600AFGB1C |
| IC3600KRSA2 | 531X138RDGBBG1 | IC3600AFGB1B |
| IC3600KMVH1 | 531X138RDGAAG1 | IC3600AFGB1 |
| IC3600KMVB2 | 531X137TRGACG1 | IC3600AFGA1D1B |
The content is from Ruichang Mingsheng Automation Equipment Co., LTD
Contact: +86 15270269218
