TEL Tokyo Electron 1180-000579-11分析板

TEL Tokyo Electron   1180-000579-11分析板

1.产 品 资 料 介 绍：

中文资料：

TEL Tokyo Electron 1180-000579-11 分析板（Analysis Board） 是应用于半导体制造设备中的专用电子模块，主要用于对设备运行过程中采集的各类信号进行实时分析、诊断、处理与反馈。该模块属于 Tokyo Electron 的专用子系统电路板，通常与控制系统、传感器模块、通信接口板等配合使用，在设备运行稳定性、故障预判、工艺控制等方面发挥关键作用。

一、基本信息

• 产品型号： 1180-000579-11

• 产品名称： 分析板（Analysis Board）

• 制造商： Tokyo Electron Ltd.（TEL）

• 所属类别： 信号分析处理模块 / 辅助控制电路板

二、主要功能

1. 信号数据分析与处理

   • 对来自传感器（如温度、压力、光电检测）、执行机构和工艺模块的模拟/数字信号进行集中采集与分析；

   • 可能集成 A/D、D/A 转换器、高速逻辑处理器或数字滤波单元。

2. 工艺状态监测与反馈

   • 实时分析设备运行中的关键参数，检测异常波动、状态变化；

   • 向中央控制器反馈分析结果，用于自动调整工艺流程或报警处理。

3. 数据接口与通信

   • 支持与主控制单元（如 E244 单板计算机）和其他模块（如采集卡、通信模块）进行数据交换；

   • 可能具备 I²C、SPI、TTL、RS232 或背板总线等通信方式。

4. 设备自诊断与故障定位

   • 具备自测试功能（BIST），用于设备上电自检、故障源定位等；

   • 支持关键故障事件记录功能，便于维护与溯源。

英文资料：

The TEL Tokyo Electron 1180-000579-11 Analysis Board is a specialized electronic module used in semiconductor manufacturing equipment, mainly for real-time analysis, diagnosis, processing, and feedback of various signals collected during equipment operation. This module belongs to the dedicated subsystem circuit board of Tokyo Electron and is usually used in conjunction with control systems, sensor modules, communication interface boards, etc. It plays a key role in equipment operation stability, fault prediction, process control, and other aspects.

1、 Basic Information

Product model: 1180-000579-11

Product Name: Analysis Board

Manufacturer: Tokyo Electron Ltd. (TEL)

Category: Signal Analysis and Processing Module/Auxiliary Control Circuit Board

2、 Main functions

Signal data analysis and processing

Centralize the collection and analysis of analog/digital signals from sensors (such as temperature, pressure, photoelectric detection), actuators, and process modules;

Possible integration of A/D, D/A converters, high-speed logic processors, or digital filtering units.

Process status monitoring and feedback

Real time analysis of key parameters during equipment operation, detecting abnormal fluctuations and status changes;

Feedback analysis results to the central controller for automatic adjustment of process flow or alarm handling.

Data interface and communication

Support data exchange with the main control unit (such as E244 single board computer) and other modules (such as acquisition card, communication module);

May have communication methods such as I ² C, SPI, TTL, RS232, or backplane bus.

Equipment self diagnosis and fault location

Equipped with self-test function (BIST), used for device power on self-test, fault source localization, etc;

Support critical fault event recording function for easy maintenance and traceability.

2.产      品      展      示      

3.其他产品

ABSOLUTE PROCESS API4380GD隔离变送器

IS215UCCCM04AB 控制器板

ADLINK  CPS-H325/24 电源模块

4.其他英文产品

DELTA TAU ACC-24E2 interface simulation

ALSTOM 3EST125-975 DCC2382A Control Pane

Asea 2668-184-280 12 slot control board

The content is from Ruichang Mingsheng Automation Equipment Co., LTD

Contact: +86 15270269218