SANYO DENKI PY9A300U0XXXC07伺服控制器
1.产 品 资 料 介 绍：
- 大功率精准驱动能力：作为 PY 系列大功率型号，PY9A300U0XXXC07 采用高性能功率模块与先进数字控制算法，可稳定驱动大功率伺服电机（适配范围覆盖千瓦级），在重型数控机床、大型工业机器人等大功率驱动场景中，能精准输出转矩与转速，兼顾动力强度与控制精度。
- 高频响动态响应性能：搭载高速数字信号处理器（DSP），控制周期短至微秒级，能快速捕捉电机运行状态变化，对位置、速度指令的响应延迟极低，在高速冲压、精密装配等需快速动作切换的场景中，可实现无滞后的指令跟随，提升设备运行效率。
- 多模式灵活控制切换：支持位置、速度、转矩三种核心控制模式，且可通过外部信号或参数设置实现模式无缝切换，既能满足精密机床的微米级定位需求，也能适配重载输送带的恒转矩驱动场景，灵活应对多样化工业工况。
- 宽范围电机兼容适配：不仅可无缝匹配同品牌 Q 系列、P 系列等伺服电机，还兼容符合行业标准接口的第三方大功率伺服电机，在设备升级或电机替换时，无需大规模改造硬件，仅需简单参数调试即可适配，大幅降低适配成本与停机时间。
- 智能自适应优化功能：内置自动增益调整（AGC）与负载观测器，能实时监测负载波动与运行干扰，自动优化控制参数，抑制振动与噪声，即使在负载频繁变化的场景（如物料搬运启停），也能维持系统稳定运行，减少人工调试频次。
- 高效节能与能量回收：优化 IGBT 驱动效率，降低控制器空载与运行能耗；同时内置高效再生能量处理单元，可将电机制动产生的多余能量反馈至电网或消耗于制动电阻，相比传统控制器能耗降低 15% 以上，长期运行能显著节省能源成本。
- 严苛环境耐受设计：采用高防护等级外壳（防护等级可达 IP40 及以上），能抵御工业现场的粉尘、湿气干扰；配合高效散热系统，可在 0-55℃温度、20%-85% 湿度（无凝露）环境下稳定工作，适配机床车间、冶金厂房等复杂工业场景。
- 全维度安全与运维保障：集成过流、过压、过热、过载、电机缺相保护等多重安全功能，异常工况下可快速切断输出并报警，防止设备损坏；同时支持电脑端软件监控与故障诊断，可实时查看运行数据、存储参数，便于快速排查故障，缩短运维时间。
SANYO DENKI PY9A300U0XXXC07主轴电机 英文资料：
High power and precise driving capability: As a high-power model of the PY series, PY9A300U0XXXC07 adopts high-performance power modules and advanced digital control algorithms, which can stably drive high-power servo motors (with an adaptation range covering kilowatts). In high-power driving scenarios such as heavy-duty CNC machine tools and large industrial robots, it can accurately output torque and speed, while balancing power intensity and control accuracy.
High frequency dynamic response performance: Equipped with a high-speed digital signal processor (DSP), the control cycle is as short as microseconds, which can quickly capture changes in the motor's operating status. The response delay to position and speed commands is extremely low. In scenarios such as high-speed stamping and precision assembly that require rapid action switching, it can achieve instruction following without lag, improving equipment operating efficiency.
Multi mode flexible control switching: supports three core control modes: position, speed, and torque, and can seamlessly switch modes through external signals or parameter settings. It can meet the micro level positioning requirements of precision machine tools and adapt to constant torque drive scenarios of heavy-duty conveyor belts, flexibly responding to diverse industrial working conditions.
Wide range motor compatibility and adaptation: Not only can it seamlessly match servo motors of the same brand such as Q series and P series, but it is also compatible with third-party high-power servo motors that meet industry standard interfaces. When upgrading equipment or replacing motors, there is no need for large-scale hardware modification, only simple parameter debugging is needed for adaptation, greatly reducing adaptation costs and downtime.
Intelligent adaptive optimization function: Equipped with automatic gain control (AGC) and load observer, it can monitor load fluctuations and operational disturbances in real time, automatically optimize control parameters, suppress vibration and noise, and maintain stable system operation even in scenarios with frequent load changes (such as material handling start stop), reducing manual debugging frequency.
Efficient energy saving and energy recovery: optimize IGBT driving efficiency, reduce controller no-load and operating energy consumption; At the same time, it is equipped with an efficient regenerative energy processing unit, which can feedback the excess energy generated by motor braking to the power grid or consume it in the braking resistor. Compared with traditional controllers, energy consumption is reduced by more than 15%, and long-term operation can significantly save energy costs.
Durable design for harsh environments: Adopting a high protection level shell (protection level up to IP40 or above), it can resist dust and moisture interference in industrial sites; Combined with an efficient cooling system, it can work stably in environments with temperatures ranging from 0-55 ℃ and humidity levels of 20% -85% (without condensation), and is suitable for complex industrial scenarios such as machine tool workshops and metallurgical plants.
Comprehensive safety and operation guarantee: integrating multiple safety functions such as overcurrent, overvoltage, overheating, overload, and motor phase loss protection. Under abnormal working conditions, the output can be quickly cut off and an alarm can be triggered to prevent equipment damage; At the same time, it supports software monitoring and fault diagnosis on the computer side, allowing real-time viewing of operating data and storage of parameters, facilitating quick troubleshooting and shortening operation and maintenance time.
SANYO DENKI PY9A300U0XXXC07主轴电机 产品展示
产品视频
3.其他产品
KLA-Tencor 281-600678接口模块
KLA-Tencor 92-005422-0x单板计算机
KLA-Tencor 040840-001滑翔前置板
4.其他英文产品
Areva MVAX31S1DE0754A monitoring relay module
Bentley 330980-50-05 proximity sensor
Siemens 6ES7307-1EA01-0AA0 power module
| AMAT 0100-20068 | TP-7216-4 | 8502-B1-DP |
| AMAT 0100-90135 | TP-2180-1 | 758-873 |
| AMAT 0100-40044 | PT-0328-1 | FLOBOSS S600 |
| AMAT 0100-11066 | TP-1210-2 | 1336-BDB-SP49D |
| AMAT 0100-90259 | TP-2126-2 | 1336-BDB-SP79D |
| AMAT 0100-90269 | TP-2142-0 | CP800 |
The content is from Ruichang Mingsheng Automation Equipment Co., LTD
Contact: +86 15270269218
